The strength of Ultra-High Performance Concrete (UHPC) can be sensitively affected by the curing method used. However, in contrast to the precast plant production of UHPC where a standard high-temperature steam curing is available, an optimum curing condition is rarely realized with cast-in-place UHPC. Therefore, the trend of the compressive strength development of UHPC was experimentally investigated in this study, with a focus on early-age strength by assuming the various curing conditions anticipated on site. Concrete specimens were cured under different conditions with variables including curing temperature, delay time before the initiation of curing, duration of curing, and moisture condition. Several conditions for curing are proposed that are required when the cast-in-place UHPC should gain a specified strength at an early age. It is expected that the practical use of UHPC on construction sites can be expedited through this study.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5455500 | PMC |
| http://dx.doi.org/10.3390/ma8085261 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Role of ivermectin and colchicine in the treatment of COVID-19: a randomized controlled clinical trial.
J Infect Dev Ctries
December 2024
Internal Medicine Department, Faculty of Medicine, Ain Shams University, Cairo, Egypt.
Introduction: The objective of this study was to assess the effectiveness of ivermectin and colchicine as treatment options for coronavirus disease 2019 (COVID-19).
Methodology: A three-arm randomized controlled clinical trial was conducted in the Triage Clinic of the family medicine department at Ain Shams University Hospitals on participants who had been diagnosed with moderate COVID-19. Patients aged < 18 years or > 65 years, with any co-morbidities, pregnant or lactating females, and those with mild or severe COVID-19 confirmed cases were excluded.
Residual nitrite and nitrate in processed meats and meat analogues in the United States.
Sci Rep
January 2025
Department of Animal & Dairy Sciences, University of Wisconsin-Madison, Madison, WI, 53706, USA.
Residual nitrite (NO) and nitrate (NO) have been widely studied in the past few decades for their function to improve processed meat quality and their impact on human health. In this study we examined how the residual nitrite and nitrate (NO) content of major classes of processed meats products (n = 1132) produced locally from three regions (East Coast, Midwest and West Coast) and plant protein-based meat analogues (n = 53) available at retail in the United States was influenced by their composition, processing, and geographical attributes. We also conducted time-dependent depletion studies and observed different patterns of NO depletion and conversion during processing and storage and correlated them with product quality.
View Article and Find Full Text PDFBiocompatibility of variable thicknesses of a novel directly printed aligner in orthodontics.
Sci Rep
January 2025
Department of Orthodontics and Dentofacial Orthopedics, University Medical Center of the Johannes Gutenberg-University Mainz, Augustusplatz 2, 55131, Mainz, Germany.
Direct printed aligners (DPAs) offer benefits like the ability to vary layer thickness within a single DPA and to 3D print custom-made removable orthodontic appliances. The biocompatibility of appliances made from Tera Harz TA-28 (Graphy Inc., Seoul, South Korea) depends on strict adherence to a standardized production and post-production protocol, including UV curing.
View Article and Find Full Text PDFTime Code for multifunctional 3D printhead controls.
Nat Commun
January 2025
Department of Civil and Systems Engineering, Johns Hopkins University, Baltimore, MD, USA.
Direct Ink Writing, an extrusion-based 3D printing technique, has attracted growing interest due to its ability to process a broad range of materials and integrate multifunctional printheads with features such as shape-changing nozzles, in-situ curing, material switching, and material mixing. Despite these advancements, incorporating auxiliary controls into Geometry Code (G-Code), the standard programming language for these printers, remains challenging. G-Code's line-by-line execution requires auxiliary control commands to interrupt the print path motion, causing defects in the printed structure.
View Article and Find Full Text PDFNanocellulose/activated carbon composite aerogel beads with high adsorption capacity for toxins in blood.
Int J Biol Macromol
January 2025
School of Chemistry, Chemical Engineering and Life Sciences, Wuhan University of Technology, Luoshi Road 122, Wuhan 430070, China; School of Materials Science and Engineering, Wuhan University of Technology, Luoshi Road 122, Wuhan 430070, China. Electronic address:
Activated carbon is extensively utilized in blood purification applications. However, its performance has been significantly limited by their poor blood compatibility. In this work, 2,2,6,6-tetramethylpiperidinyl-1-oxyl (TEMPO)-oxidized cellulose nanofibers (TOCN) and activated carbon (AC) were used to form composite beads by the drop curing method to improve hemocompatibility.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!