Laboratory Testing of Silica Sol Grout in Coal Measure Mudstones.

Materials (Basel)

Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology, Clearwater Bay, Kowloon, Hong Kong 999077, China.

Published: November 2016

The effectiveness of silica sol grout on mudstones is reported in this paper. Using X-ray diffraction (XRD), the study investigates how the silica sol grout modifies mudstone mineralogy. Micropore sizes and mechanical properties of the mudstone before and after grouting with four different materials were determined with a surface area/porosity analyser and by uniaxial compression. Tests show that, after grouting, up to 50% of the mesopore volumes can be filled with grout, the dominant pore diameter decreases from 100 nm to 10 nm, and the sealing capacity is increased. Uniaxial compression tests of silica sol grouted samples shows that their elastic modulus is 21%-38% and their uniaxial compressive strength is 16%-54% of the non-grouted samples. Peak strain, however, is greater by 150%-270%. After grouting, the sample failure mode changes from brittle to ductile. This paper provides an experimental test of anti-seepage and strengthening properties of silica sol.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5457222PMC
http://dx.doi.org/10.3390/ma9110940DOI Listing

Publication Analysis

Top Keywords

silica sol
20
sol grout
12
uniaxial compression
8
compression tests
8
silica
5
sol
5
laboratory testing
4
testing silica
4
grout
4
grout coal
4

Similar Publications

A hybrid coating made of poly (methyl methacrylate) with SiO2-TiO2 particles (PMMA/SiO2-TiO2) has been developed for use as a coating on nanosatellites, evaluating its resistance to high vacuum by quantifying its weight loss. The coating was applied on an Al 7075 aluminum substrate used for the aerospace sector. PMMA/SiO2-TiO2 hybrid coatings were prepared using sol-gel reaction in situ assisted with sonochemistry.

View Article and Find Full Text PDF

Organic-inorganic hybrid materials are explored for application as solid electrolytes for lithium-ion batteries. The material consists of a porous silica network, of which the pores are infiltrated by poly(ethylene oxide) and lithium perchlorate. The synthesis involves two steps: First, the inorganic backbone is created by the acid-catalyzed sol-gel synthesis of tetraethyl orthosilicate to ensure continuity of the backbone in three dimensions.

View Article and Find Full Text PDF

Synthesis of anisotropic silica nanoparticles by organic amine with diverse structures.

Nanotechnology

January 2025

School of Chemical Science and Engineering, Tongji University, Shanghai, People's Republic of China.

Herein, we synthesized anisotropic silica nanoparticles (AISNPs) with organic amines with different structures. Monoamines and diamines with distance between amine groups shorter than4 Å have been observed to facilitate the formation of isotropic silica nanoparticles (ISNPs). AISNPs were synthesized with diamines with distance between amine groups longer than4 Å and linear structures of triamines.

View Article and Find Full Text PDF

Poly(-lysine)--poly(ethylene glycol)--poly(-lysine) triblock copolymers for the preparation of flower micelles and their irreversible hydrogel formation.

Sci Technol Adv Mater

November 2024

Department of Materials Science, Institute of Pure and Applied Sciences, University of Tsukuba, Tsukuba, Ibaraki, Japan.

Poly(-lysine)--poly(ethylene glycol)--poly(-lysine) (PLys--PEG--PLys) triblock copolymers formed polyion complex (PIC) with poly(acrylic acid) (PAAc) or sodium poly(styrenesulfonate) (PSS), leading to the formation of flower micelle-type nanoparticles (Nano or Nano) with tens of nanometers size in water at a polymer concentration of 10 mg/mL. The flower micelles exhibited irreversible temperature-driven sol-gel transitions at physiological ionic strength, even at low polymer concentrations such as 40 mg/mL, making them promising candidates for injectable hydrogel applications. Rheological studies showed that the chain length of PLys segments and the choice of polyanions significantly impacted irreversible hydrogel formation, with PSS being superior to PAAc for the formation.

View Article and Find Full Text PDF

Tequila vinasses are organic wastes generated during ethanol fermentation at elevated temperatures (≥90 °C) and pH ≤ 4.0, making them hazardous to the environment. This paper describes a new, simplified UV-vis spectroscopy-based procedure for monitoring the adsorption of color compounds in tequila vinasses onto silica-based adsorbents, along with an optimized synthesis method to produce the most efficient sol-gel synthesized thiol-functionalized adsorbent.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!