A novel nickel oxide/carbon nanotube/polyaniline (NCP) nanocomposite has been prepared and used to modify the electrocatalytic properties of carbon cloth anode in fabricating dual-chamber MFC. The prepared nanocomposite was characterized by scanning electron microscopy, X-ray diffraction, and fourier transform infrared spectroscopy. The carbon cloth coated with the NCP nanocomposite showed the enhanced electrochemical performance as compared to bare carbon cloth anode. The electrochemical properties of the fabricated MFC with the modified anode have been investigated by linear sweep voltammetry and electrochemical impedance spectroscopy. The maximum power density of the MFC using the novel NCP nanocomposite-carbon cloth anode increased by 61.88% compared to that of the bare carbon cloth anode. In comparison to the bare carbon cloth anode, the new composite anode showed 26.8% enhancement of current density output which it can be due to the enhancement of the charge transfer capability.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s00449-017-1822-y | DOI Listing |
Langmuir
January 2025
School of Chemical Engineering, The University of Queensland, Brisbane, QLD 4072, Australia.
Ofloxacin, a commonly prescribed antibiotic, raises serious environmental concerns due to its persistence in aquatic systems. This study offers new insights into the environmental behavior of ofloxacin and its interactions with carbon-based adsorbents with the aim of enhancing our understanding of its removal mechanisms via adsorption processes. Using a comprehensive computational approach, we analyzed the speciation, pK values, and solubility of ofloxacin across various pH conditions, accounting for all four microspecies, including the often-overlooked neutral form.
View Article and Find Full Text PDFBioresour Technol
January 2025
BioTeC+ - Chemical and Biochemical Process Technology and Control, Department of Chemical Engineering, KU Leuven, Gebroeders De Smetstraat 1, 9000 Gent, Belgium.
Environmental pollution from packaging, has led to a need for sustainable alternatives. This study investigates the biodegradation of polylactic acid (PLA) by Amycolatopsis orientalis and Amycolatopsis thailandensis after thermal and thermal-alkaline pretreatments. The biodegradation was assessed based on weight loss, CO evolution, carbon balance analysis and scanning electron microscopy (SEM).
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
College of Textile and Clothing Engineering, Soochow University, 199 Ren'ai Road, Suzhou 215123, China.
Recently developed asymmetric heterogeneous moisture-driven electricity generators (AHMEGs) are advantageous for harvesting energy from ubiquitous moisture due to their superior output performance and possible flexibility. However, the regeneration of AHMEG has seldom been explored. Here, we report the fabrication of flexible AHMEGs with regeneration ability simply by asymmetrically incorporating carbon nanotubes into a bilayer-structured gel with heterogeneities of both hygroscopicity and charge.
View Article and Find Full Text PDFJ Colloid Interface Sci
January 2025
CAS Key Laboratory of Carbon Materials, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001, China. Electronic address:
The development of advanced bifunctional oxygen electrocatalysts for the oxygen reduction reactions (ORR) and oxygen evolution reactions (OER) is crucial for the practical application of zinc-air batteries (ZABs). Herein, porous carbon nanosheets integrated with abundant graphene-wrapped CoO and CoNx (CoO/CoNx-C) were successfully fabricated through a simple one-step pyrolysis. With convenient porous channel and large accessible surface, abundant CoO/CoNx species and graphene wrapping structure, CoO/CoNx-C exhibited a half-wave potential of 0.
View Article and Find Full Text PDFJ Colloid Interface Sci
January 2025
State Key Laboratory of Bio-Fibers and Eco-Textiles, Qingdao University, No. 308 Ningxia Road, Qingdao 266071 PR China. Electronic address:
Luminescent solar concentrators (LSCs) are large scale sunlight collector and can be used for building-integrated photovoltaics (BIPV). Achieving high-performance LSCs requires fluorophores with broad absorption, high quantum yield and a large Stokes shift. Nevertheless, conventional high-efficiency LSCs typically rely on heavy metal-based quantum dots as fluorophores.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!