Bacterial adhesion and proliferation on surfaces are a challenge in medical and industrial fields. Here, a simple one-step technique is reported to fabricate self-cleaning and bactericidal surfaces. White, blue, and violet paints were produced using titanium dioxide nanoparticles, 1H,1H,2H,2H-perfluorooctyltriethoxysilane, crystal violet, toluidine Blue O, and ethanol solution. All of the painted surfaces showed superhydrophobicity in air, and even after hexadecane oil contamination, they retained water repellency and self-cleaning properties. In an assay of bacterial adhesion, significant reductions (>99.8%) in the number of adherent bacteria were observed for all the painted surfaces. In bactericidal tests, the painted surfaces not only demonstrated bactericidal activity against Staphylococcus aureus and Escherichia coli in the dark but also induced very potent photosensitization (>4.4 log reduction in the number of viable bacteria on the violet painted surface) under white light illumination. The technique that we developed here is general and can be used on a wide range of substrates such as paper, glass, polymers, and others.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsami.7b05977 | DOI Listing |
Sensors (Basel)
January 2025
Centre of Mechanical Technology and Automation (TEMA), Department of Mechanical Engineering, University of Aveiro, 3810-193 Aveiro, Portugal.
To automate the quality control of painted surfaces of heating devices, an automatic defect detection and classification system was developed by combining deflectometry and bright light-based illumination on the image acquisition, deep learning models for the classification of non-defective (OK) and defective (NOK) surfaces that fused dual-modal information at the decision level, and an online network for information dispatching and visualization. Three decision-making algorithms were tested for implementation: a new model built and trained from scratch and transfer learning of pre-trained networks (ResNet-50 and Inception V3). The results revealed that the two illumination modes employed widened the type of defects that could be identified with this system, while maintaining its lower computational complexity by performing multi-modal fusion at the decision level.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Centre for Advanced Composite Materials, Universiti Teknologi Malaysia (UTM), Johor Bahru 81310, Malaysia.
With the encroaching issue of water pollution, the use of involved chemicals to remove pollutants from water is not only a risk of chemical contamination, a potential hazard to the environment and human health but also requires significant investment in managing and improving the chemicals. Therefore, alginate as one of the nanomaterial-adorned polysaccharides-based entity that usually extract from brown algae has been used as novel and more efficient catalysts in the removal of a variety of aqueous pollutants from wastewater, including ionic metals and organic/inorganic pollutants by using the adsorption techniques. Adsorption is a technique used in water treatment where non-polar or particles less soluble in water are stuck to the surface of the adsorbent and therefore purifying it.
View Article and Find Full Text PDFACS Appl Mater Interfaces
January 2025
Department of Organic and Inorganic Chemistry, University of Basque Country UPV/EHU, 48940 Leioa, Greater Bilbao, Basque Country, Spain.
Magnetic nanoparticles (NPs) are gaining significant interest in the field of biomedical functional nanomaterials because of their distinctive chemical and physical characteristics, particularly in drug delivery and magnetic hyperthermia applications. In this paper, we experimentally synthesized and characterized new FeO-based NPs, functionalizing its surface with a 5-TAMRA cadaverine modified copolymer consisting of PMAO and PEG. Despite these advancements, many combinations of NP cores and coatings remain unexplored.
View Article and Find Full Text PDFJ Clin Med
December 2024
Department of Morpho-Functional Sciences (II), Faculty of Medicine, "Grigore T. Popa" University of Medicine and Pharmacy, 700020 Iasi, Romania.
: The aim is to bring attention to the existence of a rare type of trauma of the hand, high-pressure injection injury, that appears to be minor with negligible signs and symptoms within the first hours after the accident, but in reality, produces significant tissue destruction with severe consequences. Recognizing this type of trauma by medical personnel, understanding the mechanisms involved, and knowing the etiological and prognostic factors can lead to early treatment initiation and avoid severe mutilating sequelae. : A retrospective study on 16 patients diagnosed with high-pressure injection injuries, including water, air, paint, paint mixed paint with thinner, petroleum jelly, and lime (washable paint containing calcium oxide).
View Article and Find Full Text PDFMaterials (Basel)
January 2025
Institute of Mechanical Technology, Poznan University of Technology, 60-965 Poznan, Poland.
Surface wettability, defined by the contact angle, describes the ability of a liquid to spread over, absorb or adhere to a solid surface. Surface wetting analysis is important in many applications, such as lubrication, heat transfer, painting and wherever liquids interact with solid surfaces. The behavior of liquids on surfaces depends mainly on the texture and chemical properties of the surface.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!