Structured illumination microscopy with interleaved reconstruction (SIMILR).

J Biophotonics

Precision Machinery & Precision Instrumentation, University of Science and Technology of China, Hefei, China.

Published: February 2018

Structured illumination microscopy (SIM) is the commonly used super-resolution (SR) technique for imaging subcellular dynamics. However, due to its need for multiple illumination patterns, the frame rate is just a fraction of that of conventional microscopy and is thus too slow for fast dynamic studies. A new SR image reconstruction method that maximizes the use of each subframe of the acquisition series is proposed for improving the super-resolved frame rate by N times for N illumination directions. The method requires no changes in raw data and is appropriate for many versions of SIM setup, including those implementing fast illumination pattern generation mechanism based on spatial light modulator or digital micromirror device. The performance of the proposed method is demonstrated through imaging the highly dynamic endoplasmic reticulum where continuous rapid growths or shape changes of tiny structures are observed.

Download full-text PDF

Source
http://dx.doi.org/10.1002/jbio.201700090DOI Listing

Publication Analysis

Top Keywords

structured illumination
8
illumination microscopy
8
frame rate
8
microscopy interleaved
4
interleaved reconstruction
4
reconstruction similr
4
similr structured
4
illumination
4
microscopy sim
4
sim commonly
4

Similar Publications

Isolation and Characterization of a Lytic Phage PaTJ Against .

Viruses

November 2024

Key Laboratory of Tropical Marine Bio-Resources and Ecology, South China Sea Institute of Oceanology, Chinese Academy of Sciences, Guangzhou 510000, China.

is a major global threat to human health, and phage therapy has emerged as a promising strategy for treating infections caused by multidrug-resistant pathogens. In this study, we isolated and characterized a lytic phage, PaTJ, from wastewater. PaTJ belongs to the phage family , and is featured by short latency (30 min) and large burst size (10 PFU per infected cell).

View Article and Find Full Text PDF

To achieve high-precision 3D reconstruction, a comprehensive improvement has been made to the binocular structured light calibration method. During the calibration process, the calibration object's imaging quality and the camera parameters' nonlinear optimization effect directly affect the caibration accuracy. Firstly, to address the issue of poor imaging quality of the calibration object under tilted conditions, a pixel-level adaptive fill light method was designed using the programmable light intensity feature of the structured light projector, allowing the calibration object to receive uniform lighting and thus improve the quality of the captured images.

View Article and Find Full Text PDF

Advancements in Raman light sheet microscopy have provided a powerful, non-invasive, marker-free method for imaging complex 3D biological structures, such as cell cultures and spheroids. By combining 3D tomograms made by Rayleigh scattering, Raman scattering, and fluorescence detection, this modality captures complementary spatial and molecular data, critical for biomedical research, histology, and drug discovery. Despite its capabilities, Raman light sheet microscopy faces inherent limitations, including low signal intensity, high noise levels, and restricted spatial resolution, which impede the visualization of fine subcellular structures.

View Article and Find Full Text PDF

Point cloud registration is pivotal across various applications, yet traditional methods rely on unordered point clouds, leading to significant challenges in terms of computational complexity and feature richness. These methods often use k-nearest neighbors (KNN) or neighborhood ball queries to access local neighborhood information, which is not only computationally intensive but also confines the analysis within the object's boundary, making it difficult to determine if points are precisely on the boundary using local features alone. This indicates a lack of sufficient local feature richness.

View Article and Find Full Text PDF

G-RCenterNet: Reinforced CenterNet for Robotic Arm Grasp Detection.

Sensors (Basel)

December 2024

School of Mechanical and Electrical Engineering, Changchun University of Science and Technology, Changchun 130022, China.

In industrial applications, robotic arm grasp detection tasks frequently suffer from inadequate accuracy and success rates, which result in reduced operational efficiency. Although existing methods have achieved some success, limitations remain in terms of detection accuracy, real-time performance, and generalization ability. To address these challenges, this paper proposes an enhanced grasp detection model, G-RCenterNet, based on the CenterNet framework.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!