A simple, facile and one-pot route for preparing SnO nanoclusters embedded on a mesoporous Sn(iv) organophosphonate (MSnP) framework is described. Reaction of SnCl·5HO with a flexible tris-phosphonic acid, mesityl-1,3,5-tris(methylenephosphonic acid), in the presence of a surfactant under hydrothermal conditions produced the desired nanocomposite, SnO@MSnP. Analytical, spectroscopic and microscopic studies establish that SnO@MSnP composite is comprised of SnO nanoparticles of an average size of 5 nm evenly and abundantly dispersed over the MSnP framework. The mesoporous metal organophosphonate support significantly augments the catalytic efficacy and vapor sensitivity of SnO nanoparticles. The catalytic efficiency of SnO@MSnP was tested for two acid-catalyzed reactions: deoximation reaction and esterification of fatty acids. SnO@MSnP exhibits remarkable sensitivity towards ammonia and acetone vapors at near room temperature and under open atmospheric conditions. The present method represents an important step towards preparation of mesoporous metal organophosphonate supported metal oxide nanoclusters and hence offers easy access to functional metal oxide based nanocomposites.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1039/c7dt01939d | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Hierarchical Self-Assembly of SnO Nanoparticles into Porous Microspheres: Exceptionally Selective Ammonia Sensing at Ambient.
ACS Appl Mater Interfaces
January 2025
Nanomaterials Laboratory, Department of Polymers and Functional Materials, CSIR-Indian Institute of Chemical Technology, Uppal Road, Tarnaka, Hyderabad 500 007, India.
Herein, porous SnO microspheres in a three-dimensional (3D) hierarchical architecture were successfully synthesized via a facile hydrothermal route utilizing d-(+)-glucose and cetyltrimethylammonium bromide (CTAB), which act as reducing and structure-directing agents, respectively. Controlled adjustment of the CTAB to glucose mole ratio, reaction temperature, reaction time, and the calcination parameters all provided important clues toward optimizing the final morphologies of SnO with exceptional structural stability and reasonable monodispersity. Electron microscopy analysis revealed that microspheres formed were hierarchical self-assemblies of numerous primary SnO nanoparticles of ∼3-8 nm that coalesce together to form nearly monodispersed and ordered spherical structures of sizes in the range of 230-250 nm and are appreciably porous.
View Article and Find Full Text PDFA study based on biochar as a reinforcing agent of irradiated waste thermoplastic composite for polymer engineering and electromagnetic shielding applications.
Environ Technol
January 2025
Solid-State Physics and Accelerators Department, National Centre for Radiation Research and Technology (NCRRT), Egyptian Atomic Energy Authority (EAEA), Cairo, Egypt.
Waste polyethylene (WPE) and virgin polyethylene (VPE) (50:50) thermoplastic have been melt-mixed with biochar (BC) made from orange peels at ratios of 5, 10, and 15(Phr) to evaluate how the filler content affected the mechanical, thermal, optical, electrical conductivity, and electromagnetic interference (EMI). γ-rays was applied to the prepared specimens to assess how radiation affected the created biocomposites. From the obtained results, the combination of BC with γ-rays, at doses of up to 100 kGy, with thermoplastic resulted in an enhanced mechanical property, particularly for composites containing 15 Phr of BC added because of its unique structure and excellent dispersion.
View Article and Find Full Text PDFInteraction of a Novel Dihydroxy Dibenzoazacrown with Different Surfactants: A Physicochemical and Spectroscopic Investigation.
J Phys Chem B
January 2025
Centre for Surface Science, Physical Chemistry Section, Department of Chemistry, Jadavpur University, Kolkata 700032, India.
Interaction of a novel dihydroxy dibenzoazacrown (HDTC) with various surfactants of different charges, for example, anionic (sodium dodecylsulfate, SDS), cationic (dodecyl trimethylammonium bromide, DTAB), cationic gemini (butanediyl-1,4-bis(dimethylcetylammonium bromide), 16-4-16), ionic liquid (1-hexadecyl-3-methylimidazolium chloride, CMImCl), and nonionic (polyoxyethylene sorbitan monostearate, Tween-60), has been investigated at a widespread range of surfactant concentrations (including premicellar, micellar, and postmicellar regime) in 15% (v/v) EtOH medium at room temperature. Several experimental techniques, viz., tensiometry, UV-vis spectroscopy, and steady-state fluorimetry, are implemented to explicate these interactions.
View Article and Find Full Text PDFThickness Dependent Structural Transition in Ph-BTBT-10 Thin Films and Stabilization of the Ubiquitous Interface Bilayer.
ACS Appl Mater Interfaces
January 2025
Instituto de Ciencia de Materiales de Barcelona (ICMAB-CSIC), Campus UAB, Carrer dels Til·lers, s/n, Bellaterra, 08193 Barcelona, Spain.
The influence of the film/substrate interface and the role of film thickness on the structural transition temperature for thin films of the asymmetric BTBT derivative 7-decyl-2-phenyl[1]benzothieno[3,2-][1]-benzothiophene (Ph-BTBT-10) have been addressed by using Kelvin probe force microscopy (KPFM) and synchrotron grazing incidence wide angle X-ray scattering (GIWAXS). Our data strongly suggest that the structural transformation from a single-layer phase to the thermodynamically stable bilayer structure develops from the bottom of the film to its surface. Contrary to observations in other organic semiconductor films, notably, the thinner the Ph-BTBT-10 film, the lower is the transition temperature.
View Article and Find Full Text PDFPrecise Control of Efficient Phosphorescence in Host-Guest Doping Systems via Dynamic Metal-Ligand Coordination.
J Phys Chem Lett
January 2025
College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou 325035, China.
Organic room-temperature phosphorescent (RTP) materials have wide-ranging applications in anticounterfeiting, biodiagnostics, and optoelectronic devices due to their unique properties. However, it remains a challenge to give organic RTP materials dynamic tunability to satisfy the demands of various advanced applications. Herein, we propose an effective strategy to precisely modulate phosphorescent performance by incorporating dynamic metal-ligand coordination within a host-guest doped system.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!