Background: Preclinical neuroimaging allows for the assessment of brain anatomy, connectivity and function in laboratory animals, such as mice and rats. Most of these studies are performed under anesthesia to avoid movement during the scanning sessions.
Method: Due to the limitations associated with anesthetized imaging, recent efforts have been made to conduct rodent imaging studies in awake animals, habituated to the restraint systems used in these instances. As of now, only one such system is commercially available for mouse scanning (Animal Imaging Research, Boston, MA, USA) integrating the radiofrequency coil electronics with the restraining element, an approach which, although effective in reducing head motion during awake imaging, has some limitations. In the current report, we present a novel mouse restraining system that addresses some of these limitations.
Results/comparison To Other Methods: The effectiveness of the restraining system was evaluated in terms of three-dimensional linear head movement across two consecutive functional MRI scans (total 20min) in 33 awake mice. Head movement was minimal, recorded in roughly 12% of the time-series. Respiration rate during the acclimation procedure dropped while the bolus count remained unchanged. Body movement during functional acquisitions did not have a significant effect on magnetic field (B) homogeneity.
Conclusion/novelty: Compared to the commercially available system, the benefit of the current design is two-fold: 1) it is compatible with a range of commercially-available coils, and 2) it allows for the pairing of neuroimaging with other established techniques involving intracranial cannulation (i.e. microinfusion and optogenetics).
Download full-text PDF |
Source |
---|---|
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5790991 | PMC |
http://dx.doi.org/10.1016/j.jneumeth.2017.06.008 | DOI Listing |
Materials (Basel)
January 2025
School of Civil Engineering, Nantong Institute of Technology, Nantong 226000, China.
Adding expansion agents to compensate for concrete shrinkage is a common crack resistance technique, but excessive expansion can also increase the porosity of concrete and reduce its strength. The addition of fibers can reduce expansion and improve the compactness of concrete. However, too little fiber will not be effective in inhibition, while too much fiber will cause aggregation.
View Article and Find Full Text PDFToxics
January 2025
School of Environmental Science and Engineering, Nanjing Tech University, Nanjing 211816, China.
Recently, the activation of chlorine dioxide (ClO) by metal(oxide) for soil remediation has gained notable attention. However, the related activation mechanisms are still not clear. Herein, the variation of iron species and ClO, the generated reactive oxygen species, and the toxicity of the degradation intermediates were explored and evaluated with nanoscale zero-valent iron (nFe) being employed to activate ClO for soil polycyclic aromatic hydrocarbon (PAH) removal.
View Article and Find Full Text PDFJ Hazard Mater
January 2025
School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China; Key Laboratory of Northwest Water Resources, Environment, and Ecology, Ministry of Education, Xi'an 710055, China. Electronic address:
Chemical dosing constitutes an effective strategy for sulfide control in sewers; however, its efficacy requires further optimization and enhancement. In this study, a novel dosing strategy using the synergistic dosing of calcium peroxide (CaO) and ferrous ions (Fe) for sulfide control was proposed, and its efficacy in controlling sulfides was evaluated using a long-term laboratory-scale reactor. The results showed that adding CaO-Fe improves the effect of sulfide control.
View Article and Find Full Text PDFAdv Model Simul Eng Sci
January 2025
Department of Mechanical and Process Engineering, Institute for Mechanical Systems, ETH Zürich, Zürich, 8092 Switzerland.
We extend (EUCLID Efficient Unsupervised Constitutive Law Identification and Discovery)-a data-driven framework for automated material model discovery-to pressure-sensitive plasticity models, encompassing arbitrarily shaped yield surfaces with convexity constraints and non-associated flow rules. The method only requires full-field displacement and boundary force data from one single experiment and delivers constitutive laws as interpretable mathematical expressions. We construct a material model library for pressure-sensitive plasticity models with non-associated flow rules in four steps: (1) a Fourier series describes an arbitrary yield surface shape in the deviatoric stress plane; (2) a pressure-sensitive term in the yield function defines the shape of the shear failure surface and determines plastic deformation under tension; (3) a compression cap term determines plastic deformation under compression; (4) a non-associated flow rule may be adopted to avoid the excessive dilatancy induced by plastic deformations.
View Article and Find Full Text PDFPest Manag Sci
January 2025
College of Chemistry and Chemical Engineering, Guangxi University, Nanning, China.
Background: Improving the compatibility between polylactic acid (PLA) and lignin is crucial for developing innovative PLA-based controlled release systems for pesticides. This study addresses the challenge of enhancing the compatibility of alkali lignin (AL) with PLA by acetylated lignin (ACL). The main aim is to synthesize and evaluate pesticide-loaded microspheres for controlled release performance using fluazinam (FZ) as the model pesticide.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!