The aim of this study was to develop a biological early warning system for the detection of aquatic toxicity and test it with five toxicants with distinct chemical nature. This was done in order to verify the spectrum of sensitivities of the proposed system, as well as the potential identification capability of the tested contaminants, using only the analysis of zebrafish's behavior. Six experimental conditions were tested: negative control and five toxicants (bleach, lindane, tributyltin, mercury, and formaldehyde). The exposure time was 45 min, and the concentrations used corresponded to 9% of LC's-96 h for the tested compounds, to ensure ecologically relevant results. A total of 108 fish were used, with each individual experimental condition being tested 18 times. A statistical model of diagnosis was used, combining self-organizing map and correspondence analysis. The values of sensitivity, specificity, accuracy, false positive, false negative, positive predictive value (PPV), and negative predictive value (NPV) were calculated. The objectives of the work were accomplished and the system showed a good overall diagnostic performance with 79% in accuracy, 77% in sensitivity, and 88% in specificity. The lowest result of the predictive values was 78% (lindane and mercury), in the case of the NPV, and 86% (bleach and lindane), in the case of the PPV. The best result of the predictive values was 100% (bleach and tributyltin), for the NPV, and 89% (tributyltin), for the PPV. Regarding the five tested toxicants, the system was able to correctly identify the agent responsible for the contamination in 40% of the positive diagnoses.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1007/s11356-017-9262-4 | DOI Listing |
Environ Sci Pollut Res Int
July 2017
Departamento de Biologia, Faculdade de Ciências da Universidade do Porto, Rua do Campo Alegre (s/n), 4169-007, Porto, Portugal.
The aim of this study was to develop a biological early warning system for the detection of aquatic toxicity and test it with five toxicants with distinct chemical nature. This was done in order to verify the spectrum of sensitivities of the proposed system, as well as the potential identification capability of the tested contaminants, using only the analysis of zebrafish's behavior. Six experimental conditions were tested: negative control and five toxicants (bleach, lindane, tributyltin, mercury, and formaldehyde).
View Article and Find Full Text PDFJ Chromatogr A
September 2004
Department of Analytical Chemistry, Faculty of Sciences, University of Valladolid, Prado de la Magdalena s/n, 47005 Valladolid, Spain.
Analytical methods for the simultaneous analysis of lindane, chlorpyriphos, z-chlorfenvinphos, endosulfan A and B, 4,4'-DDE, 4,4'-TDE, acrinathrine, bromopropylate, tetradifon, coumaphos and fluvalinate in pure beeswax samples are studied. For the analysis of bleached beeswaxes, a liquid-liquid extraction with acetonitrile followed by a clean-up on polymeric cartridges is the best option in terms of recovery and precision. However, some interferences that hinder the identification and quantification of important varroacides are found when non-bleached beeswaxes are analyzed.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
May 2004
Department of Biochemistry and Molecular and Cell Biology, Faculty of Sciences, Pedro Cerbuna 12, University of Zaragoza, Spain.
Intention, Goal, Scope, Background: Cyanobacteria have the natural ability to degrade moderate amounts of organic pollutants. However, when pollutant concentration exceeds the level of tolerance, bleaching of the cells and death occur within 24 hours. Under stress conditions, cyanobacterial response includes the short-term adaptation of the photosynthetic apparatus to light quality, named state transitions.
View Article and Find Full Text PDFChemosphere
September 1998
Institute of Food Research and Nutrition, Danish Veterinary and Food Administration, Søborg, Denmark.
Samples of crude fish oil have been refined, and the crude fish oil together with samples taken out after each step of the refining process have been analysed for organochlorine pesticides and PCB (quantified both as CB congeners and total PCB). The levels of organochlorine contaminants in fish oils remain almost constant during the neutralisation and bleaching steps of the refining process. The deodorisation step seems to cause a decrease in the amount of contaminants, especially for the most volatile compounds (alpha-HCH, lindane, HCB) where the levels were reduced to below the detection level.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!