The large surface-to-volume ratio of GaN nanowires implicates sensitivity of the optical and electrical properties of the nanowires to their surroundings. The implementation of an (Al,Ga)N shell with a larger band gap around the GaN nanowire core is a promising geometry to seal the GaN surface. We investigate the luminescence and structural properties of selective area-grown GaN-(Al,Ga)N core-shell nanowires grown on Si and diamond substrates. While the (Al,Ga)N shell allows a suppression of yellow defect luminescence from the GaN core, an overall intensity loss due to Si-related defects at the GaN/(Al,Ga)N interface has been observed in the case of Si substrates. Scanning transmission electron microscopy measurements indicate a superior crystal quality of the (Al,Ga)N shell along the nanowire side facets compared to the (Al,Ga)N cap at the top facet. A nucleation study of the (Al,Ga)N shell reveals a pronounced bowing of the nanowires along the c-direction after a short deposition time which disappears for longer growth times. This is assigned to an initially inhomogeneous shell nucleation. A detailed study of the proceeding shell growth allows the formulation of a strain-driven self-regulating (Al,Ga)N shell nucleation model.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c7nr00802cDOI Listing

Publication Analysis

Top Keywords

algan shell
20
shell
8
shell growth
8
selective area-grown
8
area-grown gan-algan
8
gan-algan core-shell
8
core-shell nanowires
8
shell nucleation
8
algan
6
nanowires
5

Similar Publications

UV-A Flexible LEDs Based on Core-Shell GaN/AlGaN Quantum Well Microwires.

ACS Appl Mater Interfaces

September 2024

Centre de Nanosciences et de Nanotechnologies (C2N), UMR 9001 CNRS, Univ. Paris-Saclay, 10 Boulevard Thomas Gobert, 91120 Palaiseau, France.

Nanostructured ultraviolet (UV) light sources represent a growing research field in view of their potential applications in wearable optoelectronics or medical treatment devices. In this work, we report the demonstration of the first flexible UV-A light emitting diode (LED) based on AlGaN/GaN core-shell microwires. The device is based on a composite microwire/poly(dimethylsiloxane) (PDMS) membrane with flexible transparent electrodes.

View Article and Find Full Text PDF

Low-Leakage Current Core-Shell AlGaN Nanorod LED Device Operating in the Ultraviolet-B Band.

ACS Appl Mater Interfaces

February 2024

Division of Advanced Materials Engineering, Engineering College, Research Center for Advanced Materials Development (RCAMD), Jeonbuk National University (JBNU), Jeonju 54896, Republic of Korea.

Despite the considerable potential of AlGaN-based ultraviolet-B light-emitting diodes (UV-B LEDs) in various applications such as phototherapy, UV curing, plant growth, and analytical technology, their development is still ongoing due to low luminescence efficiency. In this study, we introduced a novel epitaxial growth mechanism to effectively control the height and thickness of AlGaN multiple wells (MWs) on AlGaN nanorod structures using horizontal reactor-based metal-organic chemical vapor deposition (MOCVD). By adjusting the H carrier gas flow rate, we could control the growth boundary layer's thickness, successfully separating the AlGaN well and p-AlGaN layer from the substrate.

View Article and Find Full Text PDF

Core-shell GaN/AlGaN nanowires grown by selective area epitaxy.

Nanoscale Horiz

March 2023

Department of Electronic Materials Engineering, Research School of Physics, The Australian National University, Canberra, Australian Capital Territory 2600, Australia.

GaN/AlGaN core-shell nanowires with various Al compositions have been grown on GaN nanowire array using selective area metal organic chemical vapor deposition technique. Growth of the AlGaN shell using pure N carrier gas resulted in a smooth surface for the nonpolar -plane sidewalls with superior optical properties, whereas, growth using a mixed N/H carrier gas resulted in a striated surface similar to the commonly observed morphology in the growth of nonpolar III-nitrides. The Al compositions in the AlGaN shells are found to be less than the gas phase input ratio.

View Article and Find Full Text PDF

Core-Shell Nanorods as Ultraviolet Light-Emitting Diodes.

Nano Lett

February 2023

Department of Physics, Scottish Universities Physics Alliance (SUPA), University of Strathclyde, Glasgow G4 0NG, United Kingdom.

Existing barriers to efficient deep ultraviolet (UV) light-emitting diodes (LEDs) may be reduced or overcome by moving away from conventional planar growth and toward three-dimensional nanostructuring. Nanorods have the potential for enhanced doping, reduced dislocation densities, improved light extraction efficiency, and quantum wells free from the quantum-confined Stark effect. Here, we demonstrate a hybrid top-down/bottom-up approach to creating highly uniform AlGaN core-shell nanorods on sapphire repeatable on wafer scales.

View Article and Find Full Text PDF

Micro or submicron scale light-emitting diodes (µLEDs) have been extensively studied recently as the next-generation display technology. It is desired that µLEDs exhibit high stability and efficiency, submicron pixel size, and potential monolithic integration with Si-based complementary metal-oxide-semiconductor (CMOS) electronics. Achieving such µLEDs, however, has remained a daunting challenge.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!