Several brominated disinfection by-products (DBPs) are formed in chlorinated seawater pools, due to the high concentration of bromide in seawater. UV irradiation is increasingly employed in freshwater pools, because UV treatment photodegrades harmful chloramines. However, in freshwater pools it has been reported that post-UV chlorination promotes the formation of other DBPs. To date, UV-based processes have not been investigated for DBPs in seawater pools. In this study, the effects of UV, followed by chlorination, on the concentration of three groups of DBPs were investigated in laboratory batch experiments using a medium-pressure UV lamp. Chlorine consumption increased following post-UV chlorination, most likely because UV irradiation degraded organic matter in the pool samples to more chlorine-reactive organic matter. Haloacetic acid (HAA) concentrations decreased significantly, due to photo-degradation, but the concentrations of trihalomethanes (THMs) and haloacetonitriles (HANs) increased with post-UV chlorination. Bromine incorporation in HAAs was significantly higher in the control samples chlorinated without UV irradiation but decreased significantly with UV treatment. Bromine incorporation was promoted in THM and HAN after UV and chlorine treatment. Overall, the accumulated bromine incorporation level in DBPs remained essentially unchanged in comparison with the control samples. Toxicity estimates increased with single-dose UV and chlorination, mainly due to increased HAN concentrations. However, brominated HANs are known in the literature to degrade following further UV treatment.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.scitotenv.2017.05.008DOI Listing

Publication Analysis

Top Keywords

post-uv chlorination
12
bromine incorporation
12
disinfection by-products
8
chlorinated seawater
8
seawater pools
8
freshwater pools
8
increased post-uv
8
organic matter
8
control samples
8
treatment
5

Similar Publications

Drinking water utilities are interested in upgrading their treatment facilities to enhance micropollutant removal and byproduct control. Pre-oxidation by chlorine dioxide (ClO) followed by coagulation-flocculation-sedimentation and advanced oxidation processes (AOPs) is one of the promising solutions. However, the chlorite (ClO) formed from the ClO pre-oxidation stage cannot be removed by the conventional coagulation process using aluminum sulfate.

View Article and Find Full Text PDF

Sequential use of UV-LEDs irradiation and chlorine to disinfect waterborne fungal spores: Efficiency, mechanism and photoreactivation.

J Hazard Mater

February 2022

Key Laboratory of Northwest Water Resource, Environment and Ecology, MOE, Xi'an University of Architecture and Technology, Xi'an 710055, PR China; Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, PR China.

In this work, sequential applications of light-emitting diodes (UV-LEDs) with two wavelengths and chlorine (Cl) were performed for fungal spores disinfection: UV-Cl, Cl-UV, UV/Cl-UV, UV-UV/Cl, Cl-UV/Cl-Cl. Overall comparisons of the sequential processes with respect to the inhibitory effect on photoreactivation were also evaluated. According to the evaluation of culturability and membrane permeability, inactivation of fungal spores by UV was not enhanced by prior or post exposure to Cl, but in the UV/Cl process with pre or post UV treatment, the inactivation efficiency was greatly enhanced.

View Article and Find Full Text PDF

Transformation of atenolol (ATN), a micropollutant containing a secondary (2°) amine moiety, can be significantly enhanced in water treatment with sequential and combined use of chlorine and UV (chlorine/UV) through photolysis of the N-Cl bond. This study investigated the transformation kinetics, products, and mechanisms of the amine moiety of ATN in chlorine/UV (254 nm). The fluence-based, photolysis rate constant for N-Cl ATN was 2.

View Article and Find Full Text PDF

Conversion of chlorine/nitrogen species and formation of nitrogenous disinfection by-products in the pre-chlorination/post-UV treatment of sulfamethoxazole.

Water Res

September 2019

State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai, 200237, China; Shanghai Institute of Pollution Control and Ecological Security, Shanghai, 200092, China. Electronic address:

Pre-chlorination and UV disinfection are two common processes in drinking water treatment plants. Sulfamethoxazole (SMX), an antibiotic widely detected in source water, was selected as a precursor to study the conversion of chlorine/nitrogen species and DBP formation in pre-chlorination/post-UV process. The combined chlorine (mainly organic chloramines) produced in pre-chlorination of SMX can self-degrade and release free chlorine back again as pre-chlorination time goes on.

View Article and Find Full Text PDF

Chlorine is the most frequently used disinfectant and oxidant for maintaining swimming pool water quality; however, it reacts continuously with dissolved organic matter to produce disinfection by-products (DBPs), which are a health risk for pool users. UV treatment is used widely to remove chloramines, which are the most prevalent group of DBPs, albeit chloro-organic DBP concentrations often increase during post-UV chlorination. In this work, UV and ozone treatments were investigated as additional technologies to eliminate DBP formation and their precursors.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!