Development and validation of a sensitive UPLC-MS/MS instrumentation and alkaline nitrobenzene oxidation method for the determination of lignin monomers in wheat straw.

J Chromatogr B Analyt Technol Biomed Life Sci

State Key Laboratory of Crop Biology, Ministry of Science and Technology, Shandong Agricultural University, Tai'an 271018, Shandong, PR China. Electronic address:

Published: June 2017

A method to determine the lignin monomers (p-hydroxybenzaldehyde, vanillin and syringaldehyde) in plant cell wall of wheat internode was developed and validated using a high-throughput nitrobenzene oxidation step and ultra performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS) for quantification. UPLC analyses were carried out using an reversed phase C column (ACQUITY UPLC BEH, 1.7μm, 2.1×100mm) and gradient elution with water and acetonitrile. This method was completely validated in terms of analyzing speed, linearity, sensitivity, limits of detection (LODs) and limits of quantification (LOQs).The three lignin monomers were successfully separated within 6min and only 2min were required to regain its equilibrium. The method linearity with regression coefficients values (R2) greater than 0.997. Additionally, LODs ranged from 0.21 to 0.89μgL and LOQs ranged from 0.69 to 2.95μgL. The applicability of this analytical approach for determining the three lignin monomers was confirmed by the successful analysis of real samples of wheat stem internodes. The nitrobenzene oxidation method was used for the analysis of lignin monomers. We have optimized the treatment temperature (170°C, 1h) and realized the high-throughput using the microwave digestion instrument. Recovery of this extraction method ranged from 68.4% to 77.7%. The analysis result showed that the guaiacyl unit (G) was the major component of lignin and there was a higher content of the syringyl unit (S) than that of the hydroxybenzyl unit (H).

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.jchromb.2017.04.034DOI Listing

Publication Analysis

Top Keywords

lignin monomers
20
nitrobenzene oxidation
12
oxidation method
8
three lignin
8
method
6
lignin
6
monomers
5
development validation
4
validation sensitive
4
sensitive uplc-ms/ms
4

Similar Publications

Mixed Cu-Mn Oxide Catalysts for Solvolysis of Technical Lignin.

ACS Sustain Chem Eng

March 2025

Laboratory of Inorganic Materials and Catalysis, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, P.O. Box 513, Eindhoven 5600 MB, Netherlands.

With the rising demand for fuel and the societal shift toward sustainable resources, lignin emerges as a prime feedstock. Lignin is mainly composed of aromatic compounds linked within a complex matrix and holds significant potential as a source of renewable aromatics. Technical lignin, the most abundant form of lignin, is often degraded due to harsh biomass pretreatment processes.

View Article and Find Full Text PDF

This study is the first to apply dilute acid pretreatment (DAP) under different severity conditions to poplar wood genetically modified for the cinnamyl alcohol dehydrogenase (CAD1) gene, which is involved in the lignin biosynthesis pathway. The carefully selected pretreatment conditions resulted in glucose yields that were 15 points higher for the hpCAD poplar line than for the wild-type (WT) wood after 48 h of enzymatic hydrolysis. To explain this higher saccharification rate, the chemical, spectral and structural changes in WT and hpCAD wood were analyzed in relation to the severity of the pretreatment process.

View Article and Find Full Text PDF

Aldehyde-Stabilization Strategies for Building Biobased Consumer Products around Intact lignocellulosic Structures.

Acc Chem Res

March 2025

Laboratory of Sustainable and Catalytic Processing, Institute of Chemical Sciences and Engineering, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne 1015, Switzerland.

ConspectusDwindling fossil resources and their associated environmental concerns have increased interest in biobased products. In particular, many approaches to convert lignocellulosic biomass into small-molecule building blocks are being explored via thermal, chemical, and biological processes. Depending on their structure, these molecules can be used as direct (i.

View Article and Find Full Text PDF

Exploring Bio-Based Monomers in Emulsion and Miniemulsion Polymerization.

Macromol Rapid Commun

March 2025

Department of Chemical Engineering, Queen's University, Kingston, Ontario, K7L 3N6, Canada.

Sustainability is a key priority in polymer synthesis, aiming to reduce reliance on nonrenewable resources by using greener components in the polymerization process. Emulsion polymerization stands out as an environmentally friendly method for producing polymers due to its utilization of water as a dispersant. The use of renewable, bio-based materials in emulsion polymerization formulations further enhances the process sustainability.

View Article and Find Full Text PDF

The processing of coffee consists on the separation of the grains from other parts of the fruit, then roasted and extracted to obtain the beverage that is so appreciated worldwide. Several studies have dedicated efforts to treat the residue from coffee processing, while recovering lignols of industrial interest. Given this scenario, the nutrients in the coffee husk can enhance microbial growth, providing optimal conditions for the microorganisms to produce metabolites that may have medicinal properties.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!