A freshwater microalga strain of was used to investigate toxic effects induced by nickel oxide nanoparticles (NiO-NPs) in suspension. Algal cells were exposed during 96 h to 0-100 mg L of NiO-NPs and analyzed by flow cytometry. Physicochemical characterization of nanoparticles in tested media showed a soluble fraction (free Ni) of only 6.42% for 100 mg L of NiO-NPs, indicating the low solubility capacity of these NPs. Toxicity analysis showed cellular alterations which were related to NiO-NPs concentration, such as inhibition in cell division (relative cell size and granularity), deterioration of the photosynthetic apparatus (chlorophyll synthesis and photochemical reactions of photosynthesis), and oxidative stress (ROS production). The change in cellular viability demonstrated to be a very sensitive biomarker of NiO-NPs toxicity with EC of 13.7 mg L. Analysis by TEM and X-ray confirmed that NiO-NPs were able to cross biological membranes and to accumulate inside algal cells. Therefore, this study provides a characterization of both physicochemical and toxicological properties of NiO-NPs suspensions in tested media. The use of the freshwater strain of demonstrated to be a sensitive bioindicator of NiO-NPs toxicity on the viability of green algae.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5394891 | PMC |
| http://dx.doi.org/10.1155/2017/9528180 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
New strategy for the utilization of invasive species: A tert-butylhydroquinone electrochemical platform based on Solidago canadensis L.
Food Chem
January 2025
Key Laboratory of Magnetic Molecules and Magnetic Information Materials (Ministry of Education), School of Chemistry and Material Science, Shanxi Normal University, Taiyuan 030031, Shanxi, China; School of Medicine, The Chinese University of Hong Kong, Shenzhen (CUHK-Shenzhen), Shenzhen 518172, China. Electronic address:
Tert-butylhydroquinone (TBHQ) is a widely used synthetic phenolic antioxidant found in edible oils and other fried foods. Nevertheless, the excess use of TBHQ can reduce food quality and impact public health. In this paper, we reported the synthesis of a nanocomposite consisting of carbon and nitrogen co-doped nickel oxide (NiO-N/C-700), which was used to modify a pencil graphite electrode for the sensitive detection of TBHQ.
View Article and Find Full Text PDFPb-free metal oxide-based epoxy resin nanocomposites for radiation protection: Physical evaluation analysis approach.
Heliyon
January 2025
Department of Physics, College of Science, De La Salle University, Philippines.
Exposure to mid-energy radiation poses significant health risks, necessitating the development of effective shielding materials. Traditional lead-based shields, while effective, have significant drawbacks including toxicity and environmental concerns. This study investigates the potential of lead-free epoxy resin nanocomposites, incorporating bismuth oxide, nickel oxide, and cerium oxide, for mid-energy radiation protection.
View Article and Find Full Text PDFElectrostatic and Electronic Effects on Doped Nickel Oxide Nanofilms for Water Oxidation.
J Am Chem Soc
January 2025
School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Tyree Energy Technologies Building, 229 Anzac Parade, Kensington, NSW 2052, Australia.
An ideal water-splitting electrocatalyst is inexpensive, abundant, highly active, stable, selective, and durable. The anodic oxygen evolution reaction (OER) is the main bottleneck for H production with a complex and not fully resolved mechanism, slow kinetics, and high overpotential. Nickel oxide-based catalysts (NiO) are highly active and cheaper than precious metal catalysts.
View Article and Find Full Text PDFModification at ITO/NiO Interface with MoS Enables Hole Transport for Efficient and Stable Inverted Perovskite Solar Cells.
ChemSusChem
January 2025
Beijing National Laboratory for Molecular Sciences, State Key Laboratory for Structural Chemistry of Unstable and Stable Species, College of Chemistry and Molecular Engineering, Peking University, Beijing, 100871, P.R. China.
Inverted perovskite solar cells (IPSCs) utilizing nickel oxide (NiO) as hole transport material have made great progress, driven by improvements in materials and interface engineering. However, challenges remain due to the low intrinsic conductivity of NiO and inefficient hole transport. In this study, we introduced MoS nanoparticles at the indium tin oxide (ITO) /NiO interface to enhance the ITO surface and optimize the deposition of NiO, resulting in increased conductivity linked to a ratio of Ni:Ni.
View Article and Find Full Text PDFTailoring Nickel Oxide Thin Films: Comparative Study of Oxidizing Agents in Thermal and Plasma-Enhanced Atomic Layer Deposition.
ACS Omega
January 2025
Centro de Investigación en Materiales Avanzados, S.C. (CIMAV Subsede Monterrey), Alianza Norte 202, Parque de Investigación e Innovación Tecnológica, C.P. 66628 Apodaca, Nuevo León, Mexico.
Thermal atomic layer deposition (TALD) and plasma atomic layer deposition (PALD) were used for producing thin NiO films from nickel(II) acetylacetonate Ni(acac), employing different oxidizing agents (deionized water HO, ozone O, and molecular oxygen O). The films were deposited at 300 °C (TALD) and 220 °C (PALD) over glass substrates; their physical and chemical properties were considerably influenced by the choice of oxidizing agents. In particular, ALD(HO) samples had a low growth per cycle (GPC) and a high concentration of defects.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!