Green synthesis and characterization of Ag nanoparticles from Mangifera indica leaves for dental restoration and antibacterial applications.

Prog Biomater

School of Nanotechnology, Center for Nano Science and Technology, Institute of Science and Technology (IST), Jawaharlal Nehru Technological University, Kakinada, Andhra Pradesh, 533 003, India.

Published: May 2017

Green synthesis has gained a wide recognition as clean synthesis technique in the recent years. In the present investigation, silver nanoparticles were prepared by a novel green synthesis technique using Mangifera indica (Mango leaves) and found to be successfully used in dental applications. The prepared samples were spectroscopically characterized by XRD, PSA, SEM with EDS, and UV-Vis spectroscopy. The crystalline size and lattice strain were analyzed from the XRD data which were counter-verified by W-H plots and particle size analyzer. The XRD peaks revealed that average crystalline size of the as-synthesized Ag nanoparticles was of 32.4 nm with face-centered cubic structure. This was counter-verified by particle size analyzer and Williamson-Hall plots and found to be 31.7 and 33.21 nm in the former and latter, and the crystalline size of Ag NPs could be concluded as 32 ± 2 nm. The morphological structure of the prepared sample was studied through SEM images and the chemical composition was analyzed by the EDS data. The band energy was calculated as 393 nm from UV-Vis, which confirmed the synthesized sample as Ag nanoparticles. To improve the mechanical bonding and hardness of the dentally used glass ionomer cement (GIC), the synthesized silver nanoparticles were incorporated into GIC in 2% weight ratio. The morphology of the prepared specimens was studied using optical microscope images. Vickers microhardness and Monsanto hardness tests were performed on GIC, GIC reinforced with microsilver particles and GIC reinforced with nanosilver particles and the latter derived a promising results. The results of the Monsanto tests confirmed the increase in hardness of the GIC reinforced with AgNps as 14.2 kg/cm compared to conventional GIC and GIC reinforced with silver microparticle as 11.7 and 9.5 kg/cm. Similarly the Vickers hardness results exhibited the enhanced hardness of GIC-reinforced AgNps as 82 VHN compared to GIC as 54 and GIC-reinforced silver microparticles as 61 VHN. The antibacterial activity of AgNPs was tested by a well-diffusion method on Escherichia coli and Staphylococcus aureus bacteria, and the obtained results exhibited a promising antibacterial activity of the as-synthesized nanoparticles.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5433963PMC
http://dx.doi.org/10.1007/s40204-017-0067-9DOI Listing

Publication Analysis

Top Keywords

gic reinforced
16
green synthesis
12
crystalline size
12
gic
9
mangifera indica
8
leaves dental
8
synthesis technique
8
silver nanoparticles
8
particle size
8
size analyzer
8

Similar Publications

The study investigated the effects of a toughening agent and micron-sized toughening particles (TP) on the resin and carbon fiber-reinforced polymer (CFRP) composites, with a particular focus on compressive strength. The results showed that the addition of the toughening agent improved the overall mechanical properties of both the resin and CFRP but had a minor effect on the residual compressive strength (CAI) of CFRP after impact. Compared to the pure toughening agent, the addition of TP increased the CAI, GIC, and GIIC of CFRP by 74%, 35%, and 68%, respectively.

View Article and Find Full Text PDF

Objectives: This study aimed to evaluate the physical-mechanical, chemical, and biological properties of graphene-reinforced glass ionomer cements (GICs).

Materials And Methods: Different proportions of graphene powder were incorporated into 2 high-viscosity self-curing GIC, Ketac Molar (G) and Fuji IX (G), in 4 different concentrations: 0.5%, 1%, 2%, and 5%.

View Article and Find Full Text PDF

Fabrication and characterization of reinforced glass ionomer cement by zinc oxide and hydroxyapatite nanoparticles.

Heliyon

October 2024

Dental Research Center, Department of Endodontics, Dental Research Institute, School of Dentistry, Isfahan University of Medical Sciences, Isfahan, Iran.

Article Synopsis
  • This study enhances glass ionomer cement (GIC) by adding hydroxyapatite (HA) and zinc oxide (ZnO) nanoparticles to boost its strength, antibacterial properties, and biological activity.
  • The modified GIC, especially with 4 wt% ZnO, showed improved compressive strength while remaining biocompatible, but reduced fluoride release.
  • Antibacterial tests indicated that the improved GIC could be promising for dental and orthopedic use, with future research needed on the long-term effects of Zn⁺ ion release on its antibacterial performance.
View Article and Find Full Text PDF
Article Synopsis
  • The study aimed to compare the compressive and tensile strength of two conventional glass ionomer cements, zirconia-reinforced GIC, and silver amalgam.
  • Eighty samples from four groups were tested for compressive strength (CS) and diametral tensile strength (DTS) using specific apparatus and standards.
  • Results showed that silver amalgam had the highest CS and DTS, while zirconia-reinforced GIC performed better than conventional GICs, suggesting it has superior mechanical properties, but further research is needed for long-term efficacy.
View Article and Find Full Text PDF

Background: Space maintainers (SMs) are used to preserve the space created by premature loss of primary teeth. The most commonly used is the band and loop (B&L) SM. As this SM has several drawbacks, such as poor esthetics and gingival health, laboratory procedures for fabrication, and multiple seating procedures, various bonded SMs were introduced.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!