Contamination study of forest track soils located in a recreational area and filled with steel industry waste 30years ago.

The reuse of waste is increasingly widespread in order to avoid the exploitation of natural resources and to reduce costs. An example of that reuse is the employment of steel slag, a by-product from the steel making process. When the steel is produced through an electric arc furnace (EAF), two types of slag are generated: black and white slag. One application rarely used for this waste is as filler in forest tracks. In this work, two forest tracks of the Basque Country (northern Spain) filled with black and white slag 19 and 35years ago, respectively, have been studied. Leaching tests were performed using Milli-Q water and acetic acid over the slags collected in that area. Additionally, soil samples collected near the slags were subjected to acid digestion. In these soil samples, there were elements of natural origin and others that could come from the leaching of the slag. Some of the more leached elements from the black slag (Ca, Fe, K, Cr, Se, W, Mn and Mo) and white slag (Mg, Al, Na, Co, Ni and Cu) coincided with the elements of highest concentration found in the soil samples. Moreover, there were differences in some elemental concentrations of soil samples with only black slag (higher presence of Ca and Mg) and soil samples with a mixture of both types of slag. It was noticeable that the highest concentration values of the measured elements were found on a specific side of the forest tracks, possibly due to the runoff water or the higher inclination of that side. On the other hand, some areas of both forest tracks could be considered contaminated by Cr according to a standard values from the Basque regulation, posing a risk to human health since they are recreational areas.