In photopolymerization reactions, mostly multifunctional monomers are employed, as they ensure fast reaction times and good final mechanical properties of the cured materials. Drawing conclusions about the influence of the components and curing conditions on the mechanical properties of the subsequently formed insoluble networks is challenging. Therefore, an in situ observation of chemical and mechanical characteristics during the photopolymerization reaction is desired. By coupling of an infrared spectrometer with a photorheometer, a broad spectrum of different photopolymerizable formulations can be analyzed during the curing reaction. The rheological information (i.e., time to gelation, final modulus, shrinkage force) can be derived from a parallel plate rheometer equipped with a UV- and IR-translucent window (glass for NIR and CaF window for MIR). Chemical information (i.e., conversion at the gel point and final conversion) is gained by monitoring the decrease of the corresponding IR-peak for the reactive monomer unit (e.g., C═C double bond peak for (meth)acrylates, H-S thiol and C═C double bond peak in thiol-ene systems, C-O epoxy peak for epoxy resins). Depending on the relative concentration of reactive functional groups in the sample volume and the intensity of the IR signal, the conversion can be monitored in the near-infrared region (e.g., acrylate double bonds, epoxy groups) or the MIR region (e.g., thiol signal). Moreover, an integrated Peltier element and external heating hood enable the characterization of photopolymerization reactions at elevated temperatures, which also widens the window of application to resins that are waxy or solid at ambient conditions. By switching from water to heavy water, the chemical conversion during photopolymerization of hydrogel precursor formulations can also be examined. Moreover, this device could also represent an analytical tool for a variety of thermally and redox initiated systems.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acs.analchem.7b00272DOI Listing

Publication Analysis

Top Keywords

photopolymerization reactions
12
characterization photopolymerization
8
mechanical properties
8
chemical conversion
8
c═c double
8
double bond
8
bond peak
8
photopolymerization
5
real time-nir/mir-photorheology
4
time-nir/mir-photorheology versatile
4

Similar Publications

Solventless Dual-Cure Liquid Resins Via Circular Use of Phthalic Anhydride for Recyclable Composite Applications.

Macromol Rapid Commun

January 2025

Department of Materials Science and Engineering, University of Utah, Salt Lake City, Utah, 84112, USA.

Fiber-reinforced composites (FRCs) possess a remarkable strength-to-weight ratio, making them ideal light-weighing alternative materials of metals used in automotive, aerospace, and outdoor equipment applications, but their recycling is challenging. Chemically recyclable thermoset polymers can enable fiber recovery and reuse; however, challenges remain in the separation and purification of depolymerized small molecules for efficient polymer recycling. To this end, a series of liquid resins for chemically recyclable polymer networks is designed based on phthalic anhydride, a widely produced and inexpensive chemical.

View Article and Find Full Text PDF

Utilization of reusable catalysts and reaction media has recently been an area of interest to devise a sustainable approach. Interestingly, photoinduced reversible deactivation radical polymerization (photoRDRP) of glycidyl methacrylate (GMA) is achieved with reusable and magnetically separable nano zero-valent Iron (nZVI). This resulted in well-defined poly(glycidyl methacrylate) (PGMA) (upto 22700 g mol) with a low dispersity (Đ ≤ 1.

View Article and Find Full Text PDF

The design and fabrication of novel electrodes with strong electrochemical responses are crucial in advanced supercapacitor technology. In this study, a poly(m-toluidine)/silver-silver oxide (PMT/Ag-AgO) nanocomposite was prepared using the photopolymerization method. Various characterization techniques were employed to analyze the prepared nanomaterials.

View Article and Find Full Text PDF

Temperature Effects in Conventional and RAFT Photopolymerization.

Macromolecules

January 2025

Department of Chemistry and Biochemistry, Miami University, 651 E High St, Oxford, Ohio 45056, United States.

Photochemical processes are often thought to be temperature-independent. However, photochemical polymerization involves photochemical processes such as light-driven radical generation coupled with thermal-driven reactions such as monomer propagation. The apparent activation energy of propagation, ( ), of a series of three monomers, methyl acrylate (MA), methyl methacrylate (MMA), and styrene (STY), are deduced from Arrhenius analysis of conventional and RAFT photopolymerization of these monomers across a range of corresponding temperatures.

View Article and Find Full Text PDF

Photopolymerizable robust lipids towards reliability and their applications.

Biophys Rev

December 2024

Laboratorio de BioNanotecnología, Departamento de Ciencia y Tecnología, Universidad Nacional de Quilmes, Bernal, Buenos Aires, Argentina.

Synthetic lipids have been studied as components in membrane models and drug delivery systems. Polymerizable phospholipids, especially photosensitive ones, can form new bilayer bonds when UV light irradiates. These phospholipids have been known since the 1980s, but in the last few years, new applications have been highlighted.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!