Evaluation of one-way valves used in medical devices for prevention of cross-contamination.

Am J Infect Control

U.S. Food and Drug Administration, Center for Devices and Radiological Health, Office of Device Evaluation or Office of Science and Engineering Laboratories, Silver Spring, MD. Electronic address:

Published: July 2017

Background: One-way valves used in day use devices (used on multiple patients throughout a day without reprocessing between patients) are intended to reduce the potential for cross-contamination between patients resulting from the backflow of patient fluids. One-way valves are typically designed to withstand high levels of back pressure before failure; however, they may not be explicitly designed as a means of infection control as used in medical device applications.

Methods: Five different medical grade one-way valves were placed in low pressure configurations. After flushing in the intended direction of flow, bacteriophage, bacteria, or dye was placed patient side for 24 hours. The upstream device side of the valve was then evaluated for microbial growth or presence of visible dye.

Results: Leakage (ie, backflow) of the microorganisms occurred with a variety of one-way valve designs across a range of fluid properties tested.

Conclusions: This study describes testing of the one-way valves (component-level testing) for the potential of cross-contamination. Although day use medical device systems may use numerous other factors to prevent patient cross-contamination, this work demonstrates that one-way valves themselves may not prevent leakage of contaminated fluid if the fluid is able to reach the upstream side of the one-way valve.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ajic.2017.02.015DOI Listing

Publication Analysis

Top Keywords

one-way valves
24
potential cross-contamination
8
medical device
8
one-way valve
8
one-way
7
valves
6
evaluation one-way
4
medical
4
valves medical
4
medical devices
4

Similar Publications

Background: In COPD patients with severe right-sided emphysema, complete major and incomplete minor fissure, implantation of one-way valves in both the right upper (RUL) and middle lobes (ML) is a possible approach for endoscopic lung volume reduction. The aim of this retrospective analysis was to evaluate the response to therapy and the complication rate at 90 days (90d-FU) after combined RUL-ML valve implantation.

Methods: This retrospective, monocentric study included all patients from the Thoraxklinik Heidelberg who underwent RUL-ML valve treatment between 2012 and 2023 with available follow-up data.

View Article and Find Full Text PDF

Recapitulation of physiologic and pathophysiologic pulsatile CSF flow in purpose-built high-throughput hydrocephalus bioreactors.

Fluids Barriers CNS

December 2024

Department of Chemical Engineering and Materials Science, Wayne State University, 6135 Woodward Avenue, Rm 1413, Detroit, MI, 48202, USA.

Background: Hydrocephalus, an accumulation of cerebrospinal fluid (CSF) in the ventricles of the brain, is often treated via a shunt system to divert the excess CSF to a different compartment; if left untreated, it can lead to serious complications and permanent brain damage. It is estimated that one in every 500 people are born with hydrocephalus. Despite more than 60 years of concerted efforts, shunts still have the highest failure rate of any neurological device requiring follow-up shunt revision surgeries and contributing to the $2 billion cost of hydrocephalus care in the US alone.

View Article and Find Full Text PDF

Fabrication and in vivo testing of a sub-mm duckbill valve for hydrocephalus treatment.

Microsyst Nanoeng

December 2024

Department of Electrical, Computer and Energy Engineering, Arizona State University, 650 E. Tyler Mall, Tempe, AZ, USA.

Hydrocephalus is characterized by the accumulation of excess cerebrospinal fluid (CSF) in the cranium due to an imbalance between production and absorption of CSF. The standard treatment involves the implantation of a shunt to divert excess CSF into the peritoneal cavity, but these shunts exhibit high failure rates over time. In pursuit of improved reliability and performance, this study proposes a miniaturized valve designed to mimic the natural one-way valve function of the arachnoid granulations and thereby replace the shunts.

View Article and Find Full Text PDF

Despite the challenges associated with periprocedural imaging, transcatheter tricuspid valve interventions have shown important impact on outcomes. A comprehensive understanding of the anatomy of the right heart and surrounding structures is crucial. One way to optimize these interventions is by identifying the optimal fluoroscopic viewing angles along the S-curve of the tricuspid valve.

View Article and Find Full Text PDF
Article Synopsis
  • * It found that using interventions like a closed three-way stopcock or clave significantly prevented air entry, while small volumes of air (1 mL) could still cause dysfunction at certain pump speeds.
  • * Auditory cues, such as a hissing sound, were identified as important early warnings for detecting air presence in the circuit, contributing to the overall safety of ECMO systems and reducing the risk of air embolism.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!