In this study, multi-acrylate based dipentaerythritol penta-/hexa-acrylate (DPEPA) was exploited for fabrication of highly cross-linked hybrid monolithic column by copolymerization with polyhedral oligomeric silsesquioxane methacryl substituted (POSS-MA) via a "one-pot" method. The new DPEPA-POSS hybrid monolithic column was respectively characterized by Fourier transform infrared spectrometry, thermogravimetric analysis, scanning electron microscopy and nitrogen adsorption/desorption measurement. When it was used for the separation of amides, thioureas and positional isomers of phenols, ultrahigh column efficiency separation (up to 511,000 N m) was achieved with excellent selectivity. Moreover, intact protein standards could be efficiently separated with minimum tailing peaks, outperforming the commercially available silica-based C8 column. Furthermore, successful separation of complex egg white proteins and expressed BARD1 BRCT domains protein sample was also achieved with good chromatographic performance. In the future work, the DPEPA-POSS hybrid monolithic column will be further exploited and applied in capillary electrochromatography as well as the top-down based proteome research.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.aca.2017.01.057 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Marginal Gap Distance and Dynamic Fatigue Performance of Esthetic Crowns for Primary Teeth.
Int J Paediatr Dent
January 2025
Pediatric Dentistry Department, Faculty of Dentistry, King Abdulaziz University, Jeddah, Saudi Arabia.
Background: The growing demand for esthetic restorative materials highlights the need to evaluate their marginal accuracy and fracture resistance to ensure optimal clinical outcomes for primary molars.
Aim: The aim was to assess the vertical marginal gap distance and fracture resistance of esthetic restorative materials after cyclic loading.
Design: Forty extracted primary molars were randomly divided into four groups: Group I, stainless steel veneered crowns with tooth-colored material; Group II, prefabricated monolithic zirconia crowns; Group III, yttria-partially stabilized zirconia computer-aided design/computer-aided manufacturing (CAD/CAM) crowns; and Group IV, hybrid ceramic CAD/CAM crowns.
[Research advance of solid-phase microextraction based on covalent organic framework materials].
Se Pu
February 2025
School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022, China.
Solid-phase microextraction (SPME) is a fast and simple sample preparation technique that enables the enrichment of analytes, and it is used in combination with other detection techniques to provide accurate and sensitive analytical methods. SPME is widely used in environmental monitoring, food safety, life analysis, biomedicine, and other applications. The extractive coating is the core of the SPME technique, and the properties of the extractive coating greatly influence extraction selectivity and efficiency, as well as the enrichment effect.
View Article and Find Full Text PDFUltrabroadband integrated electro-optic frequency comb in lithium tantalate.
Nature
January 2025
Institute of Physics, Swiss Federal Institute of Technology Lausanne (EPFL), Lausanne, Switzerland.
The integrated frequency comb generator based on Kerr parametric oscillation has led to chip-scale, gigahertz-spaced combs with new applications spanning hyperscale telecommunications, low-noise microwave synthesis, light detection and ranging, and astrophysical spectrometer calibration. Recent progress in lithium niobate (LiNbO) photonic integrated circuits (PICs) has resulted in chip-scale, electro-optic (EO) frequency combs, offering precise comb-line positioning and simple operation without relying on the formation of dissipative Kerr solitons. However, current integrated EO combs face limited spectral coverage due to the large microwave power required to drive the non-resonant capacitive electrodes and the strong intrinsic birefringence of LiNbO.
View Article and Find Full Text PDFReview of Short-Wavelength Infrared Flip-Chip Bump Bonding Process Technology.
Sensors (Basel)
January 2025
Research and Development Center of Optoelectronic Hybrid IC, Guangdong Greater Bay Area Institute of Integrated Circuit and System, Guangzhou 510535, China.
Short-wave infrared (SWIR) imaging has a wide range of applications in civil and military fields. Over the past two decades, significant efforts have been devoted to developing high-resolution, high-sensitivity, and cost-effective SWIR sensors covering the spectral range from 0.9 μm to 3 μm.
View Article and Find Full Text PDFToward Large-Scale Photonic Chips Using Low-Anisotropy Thin-Film Lithium-Tantalate.
Adv Sci (Weinh)
January 2025
College of Optical Science and Engineering, Zhejiang University, Hangzhou, 310058, China.
Photonic manipulation of large-capacity data with the advantages of high speed and low power consumption is a promising solution for explosive growth demands in the era of post-Moore. A well-developed lithium-niobate-on-insulator (LNOI) platform has been widely explored for high-performance electro-optic (EO) modulators to bridge electrical and optical signals. However, the photonic waveguides on the x-cut LNOI platform suffer serious polarization-mode conversion/coupling issues because of strong birefringence, making it hard to realize large-scale integration.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!