In this work, two bioflocculants, namely, EB-EPS and B1-EPS, were derived from Enterobacter sp. and Bacillus sp., respectively, and analyzed with regard to their production and characterization. About 0.9 and 0.16 g of purified EB and B1 were obtained from I L of fermentation broth. Chemical analysis showed the contents of purified EB and B1 mainly as 88.7 and 92.8% (w/w) of carbohydrate, and 11.3 and 21.8% (w/w) protein, respectively. Fourier-transform infrared spectrometry analysis revealed the presence of hydroxyl, amide, and carboxyl groups in the identified bioflocculant. Thermogravimetric analysis (TGA) results exhibited enhanced thermal stability with a minimum mass loss of 50% while 25% were found to have occurred at higher temperatures (>400°C) for microbe-derived compounds EB and B1 leading to the possibility of using these compounds as fillers or for fabricating composite films for high-temperature applications. Further, the compounds from both the bacteria exhibited good antibacterial characteristics against pathogenic Escherichia coli. Degradability study of bioflocculant-embedded composite films shows the possibility of attaining eco-friendly bioremediation. Accordingly, experimental results revealed the suitability of developed composite films as a suitable alternative for food packaging and biomedical applications.

Download full-text PDF

Source
http://dx.doi.org/10.1080/10826068.2017.1292287DOI Listing

Publication Analysis

Top Keywords

composite films
12
enterobacter bacillus
8
identification production
4
production bioflocculants
4
bioflocculants enterobacter
4
bacillus characterization
4
characterization studies
4
studies work
4
work bioflocculants
4
bioflocculants eb-eps
4

Similar Publications

Indium (In) reduction is a hot topic in transparent conductive oxide (TCO) research. So far, most strategies have been focused on reducing the layer thickness of In-based TCO films and exploring TCOs. However, no promising industrial solution has been obtained yet.

View Article and Find Full Text PDF

Study of methylene blue removal and photocatalytic degradation on zirconia thin films modified with Mn-Anderson polyoxometalates.

Dalton Trans

January 2025

Departamento de Química Inorgánica, Facultad de Química y Farmacia, Centro de Energía UC, Centro de Investigación en Nanotecnología y Materiales Avanzados CIEN-UC, Pontificia Universidad Católica de Chile, Avenida Vicuña Mackenna, 4860, Santiago, Chile.

Recalcitrant pollutants are challenging to degrade during water treatment processes. Methylene blue (MB), a cationic dye, is particularly resistant to degradation and is environmentally persistent. Heterogeneous photocatalysis has emerged as a suitable strategy for removing such pollutants from water.

View Article and Find Full Text PDF

High temperature QDs organization and re-crystallization in glass supported MgO QDs doped PMMA film.

Sci Rep

January 2025

Condensed Matter Physics & Nanoscience Research Laboratory, Department of Physics and Material Science, Madan Mohan Malaviya University of Technology, Gorakhpur, 273010, U.P, India.

Article Synopsis
  • The study focuses on creating composite films of poly (methylmethacrylate) (PMMA) blended with magnesium oxide quantum dots (MgO QDs) at varying concentrations, and the films were annealed at 130°C for different durations to observe changes in their properties.
  • Analysis revealed that the initial crystallinity of the PMMA films decreased with annealing but slightly improved with the diffusion and coalescence of MgO QDs, leading to the formation of larger clusters that influenced the films' structural properties.
  • The research highlights the significance of temperature and molecular forces in the evolution of the film's morphology and stability, demonstrating unique energy dissipation mechanisms and the complex interplay of inter- and intra
View Article and Find Full Text PDF

Compositionally-graded ferroelectric thin films by solution epitaxy produce excellent dielectric stability.

Nat Commun

January 2025

State Key Laboratory of Silicon and Advanced Semiconductor Materials, School of Materials Science and Engineering, Zhejiang University, Hangzhou, 310027, China.

The composition in ferroelectric oxide films is decisive for optimizing properties and device performances. Controlling a composition distribution in these films by a facile approach is thus highly desired. In this work, we report a solution epitaxy of PbZrTiO films with a continuous gradient of Zr concentration, realized by a competitive growth at ~220 °C.

View Article and Find Full Text PDF

Intelligent soft robots that integrate both structural color and controllable actuation ability have attracted substantial attention for constructing biomimetic systems, biomedical devices, and soft robotics. However, simultaneously endowing single-layer cholesteric liquid crystal elastomer (CLCE) soft actuators with reversible 3D deformability and vivid structural color changes is still challenging. Herein, a multi-responsive (force, heat and light) single-layer 3D deformable soft actuator with vivid structural color-changing ability is realized through the reduced graphene oxide (RGO) deposition-induced Janus structure of the CLCE using a precisely-controlled evaporation method.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!