AI Article Synopsis
Article Abstract
Purpose: A thyroid-like gelatin model was used to determine potential superiority of a new navigation system for ultrasound (US)-guided electrode insertion called EchoTrack, featuring a US probe with an integrated electromagnetic field generator, in comparison with conventional US when performing radiofrequency ablation.
Methods: In order to compare 20 navigated ablations with 20 ablations under conventional US guidance, a thyroid-like gelatin model was used. In each group, 10 in-plane and 10 out-of-plane punctures were performed. Metal seeds measuring 8.5 [Formula: see text] 1.8 mm served as ablation targets. The number of redirections until final electrode placement, targeting accuracy and electrode placement time were measured.
Results: The number of redirections could be significantly ([Formula: see text]) reduced from 2.7 ± 1.3 in the conventional group to 0.2 ± 0.5 in the EchoTrack group. Accuracy increased from 3.9 ± 4.7 to 2.0 ± 1.9 mm. The total placement time increased from 39 ± 20.5 to 79.2 ± 26 s.
Conclusions: EchoTrack is able to reduce the redirections needed to place the electrode in comparison with conventional US and provides high placement accuracy. Our new navigation system has high potential to reduce the risk of harming critical structures and to improve guidance during ablation of difficult nodules, as treatment planning as well as the safety of out-of-plane punctures are improved.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1007/s11548-017-1544-2 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Impact of a Novel Two-Phase Natural Deep Eutectic Solvent-Assisted Extraction on the Structural, Functional, and Flavor Properties of Hemp Protein Isolates.
Plants (Basel)
January 2025
Department of Food Science and Nutrition, University of Minnesota, St. Paul, MN 55108, USA.
Defatting dehulled hemp seeds is a crucial step prior to protein extraction. However, conventional methods rely on flammable solvents, posing significant health, safety, and environmental concerns. Additionally, hemp protein has poor extractability, challenging functionality, and flavor limitations, restricting its broader application in foods.
View Article and Find Full Text PDFFlexural Response Comparison of Nylon-Based 3D-Printed Glass Fiber Composites and Epoxy-Based Conventional Glass Fiber Composites in Cementitious and Polymer Concretes.
Polymers (Basel)
January 2025
School of Civil Engineering and Environmental Science, University of Oklahoma, 202 W Boyd St., Norman, OK 73019, USA.
With 3D printing technology, fiber-reinforced polymer composites can be printed with radical shapes and properties, resulting in varied mechanical performances. Their high strength, light weight, and corrosion resistance are already advantages that make them viable for physical civil infrastructure. It is important to understand these composites' behavior when used in concrete, as their association can impact debonding failures and overall structural performance.
View Article and Find Full Text PDFEvaluation of Fitting Accuracy of Light- and Auto-Polymerizing Reline Materials Using Three-Dimensional Measurement Techniques.
Polymers (Basel)
January 2025
Department of Advanced Prosthodontics, Institute of Science Tokyo, Tokyo 113-8510, Japan.
Light-polymerizing reline materials offer improved chairside workability compared to conventional auto-polymerizing reline materials, addressing the partial denture (RPD) incompatibility caused by residual ridge resorption owing to long-term use. This study evaluates the fitting accuracy of relined materials by combining conventional fitting tests with three-dimensional (3D) measurements for detailed analysis. Light-polymerizing reline material (HikariLiner, Tokuyama, Tokyo, Japan, LP) and auto-polymerizing material (Rebase III, Tokuyama, AP) were used.
View Article and Find Full Text PDFA Deep Learning Approach for Mental Fatigue State Assessment.
Sensors (Basel)
January 2025
Institute of Artificial Intelligence in Sports, Capital University of Physical Education and Sports, Beijing 100191, China.
This study investigates mental fatigue in sports activities by leveraging deep learning techniques, deviating from the conventional use of heart rate variability (HRV) feature analysis found in previous research. The study utilizes a hybrid deep neural network model, which integrates Residual Networks (ResNet) and Bidirectional Long Short-Term Memory (Bi-LSTM) for feature extraction, and a transformer for feature fusion. The model achieves an impressive accuracy of 95.
View Article and Find Full Text PDFGuided Personalized Surgery (GPS) in Posterostabilized Total Knee Replacement: A Radiological Study.
J Clin Med
January 2025
Servicio de Cirugía Ortopédica y Traumatología, Hospital La Paz-IdiPaz, 28046 Madrid, Spain.
: Surgical accuracy in total knee replacement (TKR) may vary with the surgeon, the patient preoperative deformity, and the guiding system to perform the procedure. Navigation systems attempt to increase the intraoperative information the surgeon requires to make the appropriate decisions, sometimes associating cumbersome procedures and unclear effectiveness to place the implant more precisely than conventional instruments. : We conducted a retrospective case-control study with prospective data collection of radiographic measurements (alignment, joint line and patellar height) in a sample of 100 consecutive patients receiving TKR Optetrak Logic PS, either with standard surgical technique with Trulion Instrumentation ( = 59) or with the Guided Personalized Surgery (GPS) system ( = 41).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!