Bubble nucleation and growth in nanochannels.

Phys Chem Chem Phys

Department of Mechanical and Industrial Engineering, University of Toronto, M5S3G8, Canada.

Published: March 2017

We apply micro- and nanofluidics to study fundamental phase change behaviour at nanoscales, as relevant to shale gas/oil production. We investigate hydrocarbon phase transition in sub-100 nm channels under conditions that mimic the pressure drawdown process. Measured cavitation pressures are compared with those predicted from the nucleation theory. We find that cavitation pressure in the nanochannels corresponds closer to the spinodal limit than that predicted from classical nucleation theory. This deviation indicates that hydrocarbons remain in the liquid phase in nano-sized pores under pressures much lower than the saturation pressure. Depending on the initial nucleation location - along the channel or at the end - two types of bubble growth dynamics were observed. Bubble growth was measured experimentally at different nucleation conditions, and results agree with a fluid dynamics model including evaporation rate, instantaneous bulk liquid velocity, and bubble pressure. Collectively these results demonstrate, characterize, and quantify isothermal bubble nucleation and growth of a pure substance in nanochannels.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c7cp00550dDOI Listing

Publication Analysis

Top Keywords

bubble nucleation
8
nucleation growth
8
nucleation theory
8
bubble growth
8
bubble
5
nucleation
5
growth
4
growth nanochannels
4
nanochannels apply
4
apply micro-
4

Similar Publications

Concurrent effects and dynamic wetting abilities of nanometals anchored redox-active Janus nanoarchitectures on cotton fabric for sustainable catalysis and disinfection.

Int J Biol Macromol

December 2024

Hubei Key Laboratory of Advanced Textile Materials & Application, Hubei International Scientific and Technological Cooperation Base of Intelligent Textile Materials & Application, Key Laboratory of Textile Fiber & Product, Ministry of Education, Wuhan Textile University, Wuhan 430200, China; School of Materials Science & Engineering, Hubei University of Automotive Technology, Shiyan 442002, China. Electronic address:

Article Synopsis
  • Designed a new type of catalyst using a unique Lous-leaf-inspired nanoarchitecture that prevents contamination and improves efficiency in disinfection processes.
  • Utilized hydrophilic polydopamine to help create a special coating on cotton fabric that interacts well with contaminants and boosts antibacterial action, all without needing extra chemicals.
  • Achieved over 99% antibacterial effectiveness against E. coli even after multiple washes, demonstrating strong resistance and the ability to tackle common challenges in catalytic reactions.
View Article and Find Full Text PDF

This study explores the bubble nucleation process and heat transfer characteristics on nanostructured solid surfaces with mixed-wettable pillars using molecular dynamics simulations. Five different surfaces were designed by varying the wettability of the central pillars while keeping the lateral pillars hydrophilic. The nucleation behavior of argon bubbles was observed to differ significantly across these surfaces due to the combined effects of nanostructuring and mixed wettability.

View Article and Find Full Text PDF

Copper catastrophic oxidation: Theory and mechanisms.

J Chem Phys

December 2024

Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, 49 Leninsky Pr., 119334 Moscow, Russian Federation.

Copper and its alloys with transition metals (as good conductors of electricity and heat) are extensively used in electrical industry, electronics, and cooling systems and can be the subject of surface degradation by oxidation. In certain circumstances, surface degradation of copper occurs catastrophically. Predicting catastrophic oxidation kinetics and developing protective technology require understanding the mass transfer mechanisms in the solid/liquid/gas composite scale formed on the copper surface during catastrophic degradation.

View Article and Find Full Text PDF

Impact of wettability onto the growth of air bubbles at micro-cavities on silicon wafers: Experiments, simulations, and analytical solutions.

J Colloid Interface Sci

December 2024

Institute of Fluid Dynamics, Helmholtz-Zentrum Dresden-Rossendorf, 01328 Dresden, Germany; Institute of Process Engineering, Technische Universität Dresden, 01069 Dresden, Germany. Electronic address:

Hypothesis: The surface wettability influences the oversaturation-driven growth of gas bubbles on the surface via the contact angle. Larger contact angles on hydrophobic surfaces compared to hydrophilic ones lead to faster growth of bubbles nucleating at microcavities of identical size.

Experiments: Cylindric micro-cavities were etched in silicon wafers as nucleation sites.

View Article and Find Full Text PDF

A bismuth oxide-modified copper host achieving bubble-free and stable potassium metal batteries.

Chem Sci

December 2024

Siyuan Laboratory, Guangdong Provincial Engineering Technology Research Center of Vacuum Coating Technologies and New Energy Materials, College of Physics & Optoelectronic Engineering, Department of Physics, Jinan University Guangzhou 510632 China

Due to the minimal electrochemical oxidation-reduction potential, the potassium (K) metal anode has emerged as a focal in K-ion batteries. However, the reactivity of the K metal anode leads to significant side reactions, particularly gas evolution. Mitigating gas generation from K metal anodes has been a persistent challenge in the field.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!