A new simple, selective, and economical preconcentration method was developed for the determination of Cd, Pb, and Ni in poultry antibiotics and supplements. The proposed preconcentration procedure is based on SPE using 8-hydroxyquinoline and Amberlite IRC-50 resin as complex and adsorbent, respectively. The determination was carried out by microsample injection system (MIS) flame atomic absorption spectroscopy (FAAS). Several analytical parameters were examined, including pH, type of resin, amount of resin, type of eluent, eluent volume, flow rate, sample volume, and interference of diverse ions. Under optimum experimental conditions, LODs and LOQs were 0.017 and 0.055, 0.016 and 0.53, and 0.074 and 0.248 μg/L for Cd, Pb, and Ni, respectively, with RSDs < 2.50%. The accuracy of SPE-MIS-FAAS was successfully tested by the standard addition method, with obtained recoveries >99%. The proposed method was successfully applied for the determination of Cd, Pb, and Ni in poultry supplement and antibiotic samples.

Download full-text PDF

Source
http://dx.doi.org/10.5740/jaoacint.16-0398DOI Listing

Publication Analysis

Top Keywords

preconcentration method
8
determination poultry
8
solid phase
4
phase extraction
4
extraction preconcentration
4
method
4
method simultaneous
4
determination
4
simultaneous determination
4
determination cadmium
4

Similar Publications

During the pandemic surge, including SARS-CoV-2 and influenza, pooling samples emerged as an efficient strategy to identify infected individuals in large groups. While pooling enhances RT-PCR throughput, reducing costs and resources, it dilutes positive samples with negative ones, lowering sensitivity and increasing false negatives. This study proposes a new method to address the trade-off between pool sizes and RT-PCR accuracy.

View Article and Find Full Text PDF

Advancements in food technology have increased the need for thorough analysis to ensure food safety, quality, and compliance with regulatory requirements. Capillary electrophoresis-mass spectrometry (CE-MS) has emerged as a powerful tool in food analysis due to its high separation efficiency, low sample consumption, and ability to handle complex matrices. However, challenges such as the use of volatile running buffers and maintaining the stability of the electrical circuit connecting the CE and MS systems have been addressed through advancements in interface designs, such as sheathless systems and optimized sheath-liquid compositions.

View Article and Find Full Text PDF

Energized dispersive guided extraction (EDGE): a promising tool for analytical chemistry applications.

Anal Methods

January 2025

Rede Nordeste de Biotecnologia, Universidade Federal de Sergipe, São Cristóvão, SE 49100-000, Brazil.

Analytical chemistry demands precise sample preparation methods to ensure accurate qualitative and quantitative determinations, especially those capable of clean-up and preconcentration of target analytes. Extraction plays a crucial role in enhancing the selectivity and sensitivity of analytical procedures. Thus, Energized Dispersive Guided Extraction (EDGE) has emerged as an innovative alternative to traditional methods, such as Soxhlet, maceration, and percolation, as well as modern techniques like Accelerated Solvent Extraction (ASE), Supercritical Fluid Extraction (SFE), and Microwave or Ultrasound Assisted Extraction (MAE and UAE).

View Article and Find Full Text PDF

Quercetin, a key flavonoid found in many fruits and vegetables, offers notable health benefits, including antioxidant, antiviral, and antitumor properties. Yet, isolating it from complex plant materials is challenging. This research aimed to develop a selective and efficient sorbent to clean up real sample matrices and pre-concentrate quercetin, enhancing its detection using high-performance liquid chromatography (HPLC).

View Article and Find Full Text PDF

Although significant progress has been made in the effective measurement of Zn(II), Аlizarin red S (ARS) was immobilized on polyethylene polyamine-modified polyacrylonitrile (PPF-1) via a new matrix. This approach allows the detection of low levels of Zn(II) ions in various water samples via preconcentrated atomic absorption spectrometry. The use of PPF-1 in a polymer matrix for zinc preconcentration presents several advantages over traditional sorbtion-spectroscopic methods, including reduced cost, high zinc recovery, increased sensitivity, and selectivity.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!