In this issue, different chemical (alkaline and sulfite pulping, ozonolysis) and mechanical (vibratory ball milling) pre-treatments were utilized for activating wheat straw and beech sawdust prior to carboxymethylation. Detailed analysis by a range of methods, including Klason-lignin, cellulose and hemicellulose quantification, Powder-X-ray diffraction (PXRD) and attenuated total reflection (ATR) IR spectroscopy, enabled the investigation of material alterations. Subsequently, carboxymethylation was carried out with both untreated and activated materials, allowing the evaluation of activation steps by determining degrees of substitution with carboxymethyl groups (DS). Moreover, carboxymethylation conditions were optimized, realizing high DS of up to 1.05. Results further revealed that ball milling enhanced the subsequent conversion; whereas chemical pre-treatments did not effectively increase material accessibilities. Further studies on chemically untreated materials emphasized that a highly reactive surface was already generated in the course of the carboxymethylation, inter alia through the concomitant dissolution of matrix components.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.carbpol.2016.12.066 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimizing key parameters for grinding energy efficiency and modeling of particle size distribution in a stirred ball mill.
Sci Rep
January 2025
Minerals Beneficiation and Agglomeration Department, Minerals Technology Institute, Central Metallurgical Research & Development Institute (CMRDI), P.O. Box 87, Helwan, Cairo, 11722, Egypt.
Fine grinding using a stirred ball mill can enhance ore liberation but incurs high energy consumption, which can be minimized by optimizing operating conditions. This study explores the impact of key operational parameters-grinding time, stirrer tip speed, solid concentration, and feed size-on grinding efficiency, evaluated using specific energy inputs, in stirred milling of Egyptian copper ore. The particle size distribution (PSD) of ground products was simulated using the Gates-Gaudin-Schuhmann model (GGS) and the Rosin-Rammler-Benne (RRB) function.
View Article and Find Full Text PDFListening to the Formation of Polymorphs in a Ball Mill.
Anal Chem
January 2025
ICGM, Univ. Montpellier, CNRS, ENSCM, 34000 Montpellier, France.
In this contribution, we apply our newly developed ball-milling platform, which combines Raman spectroscopy and thermal (IR) imaging, as well as acoustic and high-speed optical video recordings, to the synthesis and transformation of citric acid-isonicotinamide (1:2) cocrystal polymorphs in transparent PMMA jars. Particularly, we demonstrate how Raman, temperature, acoustic, and video data are complementary and enable detection and connection of chemical and physical events happening during ball-milling in a time-resolved manner. Importantly, we show that the formation of the three cocrystal polymorphs can be detected through acoustic analyses solely.
View Article and Find Full Text PDFScale-Up of Nanocorundum Synthesis by Mechanochemical Dehydration of Boehmite.
Ind Eng Chem Res
January 2025
Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, D-45470 Mülheim an der Ruhr, Germany.
This work presents the scale-up of room-temperature mechanochemical synthesis of nanocorundum (high-surface-area α-AlO) from boehmite (γ-AlOOH). This transformation on the 1 g scale using a laboratory shaker mill had previously been reported. High-energy Simoloyer ball mills equipped with milling chambers of sizes ranging from 1 to 20 L were used to scale up the mechanochemical nanocorundum synthesis to the 50 g to 1 kg scale, which paves the way to further increase batch size.
View Article and Find Full Text PDFEnlargement of the Surface Area of High-Entropy Alloys with Acid Treatment as Positive Electrode for High Specific Capacitance Supercapacitors.
ChemistryOpen
January 2025
Department of Chemistry, School of Sciences and Humanities, SR University, Warangal, Telangana, 506371, India.
High-entropy alloys (HEAs), containing five or more elements in equal proportions, have recently made significant achievements in materials science due to their remarkable properties, including high toughness, excellent catalytic, thermal, and electrical conductivity, and resistance to wear and corrosion. This study focuses on a HEA composed of 23Fe-21Cr-18Ni-20Ti-18Mn, synthesized via ball milling. The alloy was treated with hydrochloric acid (HCl) to enhance its active surface area.
View Article and Find Full Text PDFMagnetic nanoparticles of Nd2Fe14B prepared by ethanol-assisted wet ball milling technique.
Sci Rep
January 2025
Environmental and Occupational Hazards Control Research Center, Research Institute for Health Sciences and Environment, Shahid Beheshti University of Medical Sciences, Tehran, Iran.
The magnetic material Nd2Fe14B is one of the strongest magnetic materials found in nature. The demand for the production of these nanoparticles is significantly high due to their exceptional properties. The aim of the present study is to synthesize magnetic nanoparticles of Nd2Fe14B using ethanol in the wet ball milling technique (WBMT).
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!