MnOOH nanorods as high-performance anodes for sodium ion batteries.

Chem Commun (Camb)

Key Laboratory of Advanced Energy Materials Chemistry, College of Chemistry, Nankai University, Tianjin 300071, China.

Published: February 2017

MnOOH nanorods, which were prepared using a hydrothermal method, have been used for the first time as anode materials for sodium ion batteries. The as-prepared MnOOH nanorods with lengths of 1.2-3.7 μm and diameters of 60-90 nm delivered high performance of reversible electrochemical Na/Na storage such as an initial discharge capacity of 485.5 mA h g at 80 mA g, a high initial Coulombic efficiency of 86.7% and a low average potential polarization of 0.36 V. Instrumental analyses with ex situ XRD, TEM and XPS show that the sodium storage mechanism in MnOOH can be related to the reversible formation of MnO and NaOH. This work demonstrates that cheap MnOOH nanorods are potential anode materials for SIBs.

Download full-text PDF

Source
http://dx.doi.org/10.1039/c7cc00087aDOI Listing

Publication Analysis

Top Keywords

mnooh nanorods
16
sodium ion
8
ion batteries
8
anode materials
8
mnooh
5
nanorods high-performance
4
high-performance anodes
4
anodes sodium
4
batteries mnooh
4
nanorods prepared
4

Similar Publications

Effective adsorption of antimony (V) from contaminated water by a novel composite manganese oxide/oxyhydroxide as an adsorbent.

Water Sci Technol

May 2022

Hunan Key Laboratory of Biomedical Nanomaterials and Devices, College of Life Sciences and Chemistry, Hunan University of Technology, Zhuzhou 412007, China.

To obtain an efficient and low-cost adsorbent for the Sb(V) removal in Sb(V)-contaminated water, a novel composite manganese oxide/oxyhydroxide (CMO) was synthesized by a simple hydrothermal synthesis method. The synthesized adsorbent was characterized via scanning electron microscopy, X-ray diffraction, transmission electron microscopy, Brunauer-Emmett-Teller surface area, Fourier transform infrared, and X-ray photoelectron spectroscopy analyses. The results revealed that the as-prepared CMO adsorbent possessed a porous structure consisting of MnO nanoparticles and MnOOH nanorods.

View Article and Find Full Text PDF

In Situ Visualizing Oxidase-Mimicking Activity of Single MnOOH Nanotubes with Mie Scattering-Based Absorption Microscopy.

Inorg Chem

April 2021

National Collaborative Innovation Center for Nuclear Waste and Environmental Safety, School of National Defence Science & Technology, Southwest University of Science and Technology, Mianyang 621010, P. R. China.

Imaging the catalytic activity at the single-particle level can greatly promote the screening and rational design of highly efficient nanozymes, but conventional techniques are based on ensemble analysis. Here, we present a new absorption microscopy for in situ visualizing oxidase-mimicking activity of single MnOOH nanotubes. The particle with a size more than 700 nm roughly equally scatters all wavelengths of visible light via Mie scattering, and the scattering light is collected by dark-field optical microscopy.

View Article and Find Full Text PDF

The inhibition of bromate formation is a challenge for the application of ozonation in water treatment due to the carcinogenicity and nephrotoxicity of bromate. In this study, the high-mobility lattice oxygen-rich MnOOH nanorods were synthesized successfully and applied for the bromate inhibition during catalytic ozonation in bromide and organic pollutants-containing wastewater treatment. The catalytic ozonation system using lattice oxygen-rich MnOOH nanorods exhibited an excellent performance in bromate control with an inhibition efficiency of 54.

View Article and Find Full Text PDF

In the current study, γ-AlOOH, γ-MnOOH, and α-Mn2O3 nanorods (NRs) were easily synthesized and applied as advanced antibacterial materials. γ-AlOOH NRs with 20 nm width, [100] crystal plane, and 200 nm length were fabricated through a surfactant-directed solvothermal method. γ-MnOOH NRs with 20 nm width, [101] crystal direction and 500 nm length were fabricated through a hydrothermal method.

View Article and Find Full Text PDF

Sulfate radical-based advanced oxidation processes (SR-AOPs) have received increasing attention as viable technology for recalcitrant organics removal from polluted waters. As for heterogeneous catalyst, it is crucial to reveal the effect of morphology on its catalytic activity and mechanism, providing guidelines for rational design of morphology-dependent catalysts. Hence, in this study, we selected manganese oxyhydroxide (MnOOH) as the peroxymonosulfate (PMS) activator and synthesized different morphological MnOOH with the same crystal structure.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!