Based on a self-injection locking scheme and the nonlinear amplification effect of a semiconductor optical amplifier, a low intensity noise amplified ultrashort cavity single-frequency fiber laser at 978 nm is demonstrated with a final output power of > 230 mW and a broad temperature range of > 15 °C for single-longitudinal-mode operation. The effective cavity length of the fiber oscillator is less than 6 mm, comprising a 3.5-mm-long highly Yb-doped phosphate fiber and a pair of fiber Bragg gratings. For the frequency range from 1.8 to 10 MHz, the relative intensity noise close to -150 dB/Hz is achieved. The signal-to-noise ratio of > 68 dB and the laser linewidth of < 10 kHz are obtained. Such narrow linewidth low noise 978 nm laser is promising, as the high-performance pump source or the efficient blue and UV light sources after nonlinear frequency conversion.

Download full-text PDF

Source
http://dx.doi.org/10.1364/OE.25.001535DOI Listing

Publication Analysis

Top Keywords

amplified ultrashort
8
ultrashort cavity
8
cavity single-frequency
8
yb-doped phosphate
8
phosphate fiber
8
fiber laser
8
laser 978
8
intensity noise
8
fiber
5
self-injection locked
4

Similar Publications

Amplification of bursts of ultrashort pulses is very challenging when the intraburst repetition frequency reaches the THz range, corresponding to (sub)-ps intervals between consecutive pulses. Periodic interference significantly modifies conditions for chirped pulse amplification (CPA), leading to temporal and spectral distortions during CPA due to optical Kerr nonlinearity. Multi-pulse chirped amplification to mJ energies may lead to a pronounced degradation of burst fidelity and the appearance of periodic temporal satellites after de-chirping the amplified waveform.

View Article and Find Full Text PDF

An inline-delay Fourier transform imaging spectrometer (iFTIS) is used to measure spatiospectral coupling in a mid-infrared (mid-IR) optical parametric amplifier (OPA). The method employs a compact inline delay line using a birefringent wedge pair and a microbolometer array as an imaging sensor, providing continuous spectral coverage from ∼0.4 to 4.

View Article and Find Full Text PDF

The ability to generate high-intensity ultrashort laser pulses is a key driver for advancing the strong-field physics and its applications. Post-compression methods aim to increase the peak intensity of amplified laser pulses via spectral broadening through self-phase modulation (SPM), followed by temporal pulse compression. However, other unavoidable nonlinear self-action effects, which typically occur parallel to SPM, can lead to phase distortions and beam quality degradation.

View Article and Find Full Text PDF

In this study, we demonstrated a few-cycle pulse generation system delivering an 8-fs and 13-nJ pulse. The oscillator of this system is a mode-locked fiber laser based on a nonlinear amplifying loop mirror (NALM), which is injected into the gain management nonlinear (GMN) amplifier after pre-chirp management by a chirped fiber Bragg grating (CFBG) and a passive fiber. Subsequently, a hollow-core photonic bandgap (HC-PBG) fiber is employed to compensate for the dispersion, achieving a pulse duration of 49.

View Article and Find Full Text PDF

Successful generation of ultrashort pulses in the spectral region of 920 nm using Nd-doped fibers requires effectively suppressing the dominant 1064 nm four-level transition. Utilizing a hybrid design incorporating a W-shaped double-clad Nd-doped fiber and a single-clad Nd-doped fiber together with filtering out parasitic 1.06 µm beam, we developed an oscillator capable of delivering ultrashort pulses at the central wavelength of 929 nm.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!