Alternative treatments, such as, NaOH, ultrasound assisted (UA) and supercritical CO (SCO), were performed to improve the potential of rice husk as adsorbent to remove methylene blue (MB) from aqueous media. All the treatments improved the surface characteristics of rice husk, exposing its organic fraction and/or providing more adsorption sites. The Langmuir and Hill models were able to explain the MB adsorption for all adsorbents in all studied temperatures. The experimental and modeled parameters demonstrated that the MB adsorption was favored by the temperature increase and by the use of NaOH-rice husk. The maximum adsorption capacities for the MB solutions (ranging from 10 to 100 mg L), estimated from the Langmuir model at 328 K, were in the following order: NaOH rice-husk (65.0 mg g) > UA-rice husk (58.7 mg g) > SCO-rice husk (56.4 mg g) > raw rice husk (52.2 mg g). The adsorption was a spontaneous, favorable and endothermic process. In general, this work demonstrated that NaOH, UA and SCO treatments are alternatives to improve the potential of rice husk as adsorbent.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.2166/wst.2016.504 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Application of response surface methodology (RSM) for experimental optimization in biogenic silica extraction from rice husk and straw ash.
Sci Rep
January 2025
Department of Chemical Engineering, Bahir Dar Institute of Technology, Bahir Dar University, P.O. Box 26, Bahir Dar, Ethiopia.
This work aimed to extract silica from combination of rice husk (RH and Rice straw (RS) by optimizing the ash digesting process parameters with the aid of response surface methodology (RSM). The effects of three independent ash digestion process factors like sodium hydroxide concentration (1-3 M), temperature (60-120 °C) and time (1-3 h), for silica production from the mixture of rice husk (RH) and rice straw (RS) were studied. A quadratic model was used to correlate the interaction effects of the independent variables for maximum silica production at the optimum process parameters by employing central composite design (CCD) with RSM.
View Article and Find Full Text PDFDevelopment and application of microcapsules based on rice husk and metallurgical sludge to improve soil fertility.
Sci Rep
January 2025
Zhalyn LLP, Almaty, 050000, Kazakhstan.
The increasing environmental issues and growing interest in utilizing natural resources have led to heightened attention towards renewable energy sources. This has spurred the exploration of sustainable approaches, including ecosystem restoration. The soil's ability to retain moisture increases with the rise in organic carbon content.
View Article and Find Full Text PDFExperimental Study on the Effects of Washing Time, Washing Temperature, and Particle Size on the Combustion and Ash Formation Characteristics of Rice Husk.
ACS Omega
December 2024
Laboratory of Liaoning Province for Clean Combustion Power Generation and Heating Supply Technology, Shenyang Institute of Engineering, Shenyang 110136, China.
There are many problems in the direct combustion of biomass, such as low combustion efficiency and easy slagging. In this paper, rice husk (RH) was taken as the research object, and the effects of different washing pretreatment conditions (washing time (WTI), washing temperature (WTE), and particle size) on the combustion characteristics and ash formation characteristics were discussed. The results show that the combustion characteristics of RH were significantly coupling-affected by the WTE and WTI, and the comprehensive characteristics of volatile release were significantly coupling-affected by the particle size and WTI.
View Article and Find Full Text PDFThe purpose of this study is to examine how co-pyrolysis of low-density polyethylene (LDPE) and rice husk is impacted by LDPE. It also looks into the physicochemical characteristics, thermal behavior, and kinetic parameters of these materials. To understand the thermal behavior through TGA, rice husk and LDPE blends in the ratios of LDPE: RH (50:50), LDPE: RH (25:75), and LDPE: RH (75:25) were prepared and tested.
View Article and Find Full Text PDF[Effects of By-products of Co-pyrolysis on Biochar for Benzene Vapor Adsorption Performance].
Huan Jing Ke Xue
January 2025
Department of Environmental Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China.
To explore the effects of the components in the raw materials and by-products of co-pyrolysis on the physicochemical properties of biochar, rice husk （RH, which has a high percentage of lignin and a low content of N） and sawdust （SD, which has a high percentage of both cellulose and N） were used as typical raw materials to prepare co-pyrolysis biochar. The benzene vapor adsorption performance of the obtained biochar was then tested on a fixed-bed device. At the same time, the by-product components generated during pyrolysis were analyzed using thermogravimetric （TG）, scanning electron microscopy （SEM）, and gas chromatography-mass spectrometry （GC-MS）.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!