A new procedure is proposed for the analysis of migration test solutions obtained from plastic bottles used in the packaging of edible oils. Ultrasound-assisted emulsification microextraction with ionic liquids was applied for the preconcentration of six phthalate esters: dimethylphthalate, diethylphthalate, di-n-butylphthalate, n-butylbenzylphthalate, di-2-ethylhexylphthalate, and di-n-octylphthalate. The enriched ionic liquid was directly analyzed by gas chromatography and mass spectrometry using direct insert microvial thermal desorption. The different factors affecting the microextraction efficiency, such as volume of the extracting phase (30 μL of the ionic liquid) and ultrasound application time (25 s), and the thermal desorption step, such as desorption temperature and time, and gas flow rate, were studied. Under the selected conditions, detection limits for the analytes were in the 0.012-0.18 μg/L range, while recovery assays provided values ranging from 80 to 112%. The use of butyl benzoate as internal standard increased the reproducibility of the analytical procedure. When the release of the six phthalate esters from the tested plastic bottles to liquid simulants was monitored using the optimized procedure, analyte concentrations of between 1.0 and 273 μg/L were detected.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1002/jssc.201601173 | DOI Listing |
Langmuir
January 2025
A. N. Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences, 119071 Moscow, Russia.
The results of an investigation of an impact of the structure of recently synthesized bis(trifluoromethylsulfonyl)imide mono- and dicationic ionic liquids on their properties and behavior as lubricants for slippery liquid infused superhydrophobic coatings are presented for a wide temperature range. In this study, a new approach based on monitoring the surface tension of a liquid sessile droplet on top of a coating was exploited for the analysis of the evolution of the coating properties in prolonged contact with the liquid. It was found that the continuous contact with water flow results in slippery property degradation according to two different scenarios.
View Article and Find Full Text PDFBull Environ Contam Toxicol
January 2025
College of Environmental Science and Engineering, Donghua University, Shanghai, 201620, China.
Ionic liquids (ILs) are widely used "green solvent" as they have a low vapor pressure and can replace volatile solvents in industry. However, ILs are difficult to biodegrade and are potentially harmful to the environment. This study, herein, investigated the toxicity of three imidazole ILs ([CMIM]Cl, [CMIM]Br, and [CDMIM]Br) towards soil microorganisms.
View Article and Find Full Text PDFChemistryOpen
January 2025
Azrieli Centre for Neuro-Radiochemistry, Brain Health Imaging Centre, CAMH, Department of Psychiatry, University of Toronto, 250 College Street, Toronto, ON, M5T 1R8, Canada.
Tributyl(ethyl)phosphonium oxopentenolate ([P][Pen]) is an ionic liquid developed to capture CO and has shown ability to catalyze carbonylation reactions in organic chemistry. Carbon-11 (C, t=20.4 min) labeled CO is a highly versatile building block for the synthesis of positron emission tomography (PET) radiotracers that are applied for medical imaging.
View Article and Find Full Text PDFACS Omega
January 2025
Instituto de Tecnologia Química e Biológica António Xavier, Universidade Nova de Lisboa (ITQB NOVA), Av. da República, 2780-157, Oeiras, Portugal.
Sporopollenin is a plant polymer present in the exine of the pollen grains that comprises two layers: the endexine and the ektexine. It possesses remarkable mechanical, thermal, and chemical stability and is also highly recalcitrant to hydrolysis. The chemical backbone of sporopollenin mostly consists of a polyhydroxylated aliphatic component and polyketide-derived aliphatic α-pyrone elements.
View Article and Find Full Text PDFACS Omega
January 2025
Department of Physics and Astronomy, University of Southern California, Los Angeles, California 90089, United States.
We report a new approach for fabricating gate-tunable thermal emissivity surfaces by spraying them on graphene ink. The devices consist of a multilayer graphene (MLG)/porous alumina membrane/gold stack, in which the MLG is deposited by spraying the graphene ink onto the porous membrane using an airbrush. The graphene ink consists of μm-sized flakes of MLG suspended in a solution of polyvinylpyrrolidone and ethylene glycol.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!