Silicon-graphene conductive photodetector with ultra-high responsivity.

Sci Rep

Centre for Optical and Electromagnetic Research, State Key Laboratory for Modern Optical Instrumentation, Zhejiang Provincial Key Laboratory for Sensing Technologies, Zhejiang University, Zijingang Campus, Hangzhou, China.

Published: January 2017

Graphene is attractive for realizing optoelectronic devices, including photodetectors because of the unique advantages. It can easily co-work with other semiconductors to form a Schottky junction, in which the photo-carrier generated by light absorption in the semiconductor might be transported to the graphene layer efficiently by the build-in field. It changes the graphene conduction greatly and provides the possibility of realizing a graphene-based conductive-mode photodetector. Here we design and demonstrate a silicon-graphene conductive photodetector with improved responsivity and response speed. An electrical-circuit model is established and the graphene-sheet pattern is designed optimally for maximizing the responsivity. The fabricated silicon-graphene conductive photodetector shows a responsivity of up to ~10A/W at room temperature (27 °C) and the response time is as short as ~30 μs. The temperature dependence of the silicon-graphene conductive photodetector is studied for the first time. It is shown that the silicon-graphene conductive photodetector has ultra-high responsivity when operating at low temperature, which provides the possibility to detect extremely weak optical power. For example, the device can detect an input optical power as low as 6.2 pW with the responsivity as high as 2.4 × 10 A/W when operating at -25 °C in our experiment.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5247717PMC
http://dx.doi.org/10.1038/srep40904DOI Listing

Publication Analysis

Top Keywords

silicon-graphene conductive
20
conductive photodetector
20
photodetector ultra-high
8
ultra-high responsivity
8
optical power
8
photodetector
6
responsivity
6
silicon-graphene
5
responsivity graphene
4
graphene attractive
4

Similar Publications

Silicon-carbon composites have been recognized as some of the most promising anode candidates for advancing new-generation lithium-ion batteries (LIBs). The development of high-efficiency silicon/graphene anodes through a simple and cost-effective preparation route is significant. Herein, by using micron silicon as raw material, we designed a mesoporous composite of silicon/alumina/reduced graphene oxide (Si/AlO/RGO) a two-step ball milling combined annealing process.

View Article and Find Full Text PDF

Scalable engineering of hierarchical layered micro-sized silicon/graphene hybrids direct foaming for lithium storage.

Nanoscale

September 2023

CAS Key Laboratory of Nanosystem and Hierarchical Fabrication, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190, P.R. China.

Low-cost micro-sized silicon is an attractive replacement for commercial graphite anodes in advanced lithium-ion batteries (LIBs) but suffers from particle fracture during cycling. Hybridizing micro-sized silicon with conductive carbon materials, especially graphene, is a practical approach to overcome the volume change issue. However, micro-sized silicon/graphene anodes prepared the conventional technique encounter sluggish Li transport due to the lack of efficient electrolyte diffusion channels.

View Article and Find Full Text PDF

Dual-ion batteries (DIBs) are a new kind of energy storage device that store energy involving the intercalation of both anions and cations on the cathode and anode simultaneously. They feature high output voltage, low cost, and good safety. Graphite was usually used as the cathode electrode because it could accommodate the intercalation of anions (i.

View Article and Find Full Text PDF

Application of Si anodes is hindered by severe capacity fading due to pulverization of Si particles during the large volume changes of Si during charge/discharge and repeated formation of the solid-electrolyte interphase. To address these issues, considerable efforts have been devoted to the development of Si composites with conductive carbons (Si/C composites). However, Si/C composites with high C content inevitably show low volumetric capacity because of low electrode density.

View Article and Find Full Text PDF

Herein, a Si/reduced graphene oxide (rGO)/C microsphere composite is reported, wherein sucrose-derived carbon binds Si nanoparticles (NPs) and rGO to act as a carbon anchor and links neighboring rGO sheets to reinforce the composite structure. In this structurally reinforced Si/rGO/C composite, the electron conduction pathways between rGO and Si NPs were maintained even under large volume changes during repeated charge-discharge processes. Consequently, the Si/rGO/C composite anode exhibited an initial discharge capacity of 1209 mAh g and superior cyclability (92 % retention at 100 cycles), initial coulombic efficiency of 80.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!