In the present study, Eucalyptus was subjected to organosolv pretreatment processes with aqueous 2-propanol at 200-220°C to obtain lignin with benign characters for its valorization and digestible substrates for bioethanol production. Results showed that different delignification ratios (64.00%-81.26%) and molecular weights (M=610-2680g/mol) of lignin fractions were dissociated from various pretreatment conditions, and the glucose yields of all the pretreated substrates significantly increased to 54.65-88.59% as compared to that of raw material (9.20%). Additionally, the amounts of β-O-4, β-β, and β-5 substructures were regularly decreased with the increased temperature and time. By contrast, the structural characteristics of the lignin fractions obtained with 70% 2-PrOH/water were less-altered than those with 50% 2-PrOH/water pretreatment. Remarkably, lignin with the lowest molecular weight (M=610g/mol) and less-altered chemical structure was achieved at 200°C for 120min, which is beneficial to subsequent catalytic degradation of lignin.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1016/j.ijbiomac.2017.01.069 | DOI Listing |
Sci Total Environ
November 2024
Environmental Engineering and Biotechnology Team, Laboratory of Mechanics, Process, Energy and Environment, National School of Applied Sciences, IBN Zohr University, Agadir, Morocco.
Anaerobic digestion (AD) of lignocellulosic wastes (LW) has garnered substantial interest because of its notable energy and nutrient recovery, along with its potential for reducing greenhouse gas emissions. However, the LW is resistant to degradation, and its hydrolysis typically requires harsh conditions, hence the need for a pretreatment. Conducting a life cycle assessment (LCA) to evaluate the pretreatment of LW is an effective way to assess the environmental impacts associated with various pretreatment methods.
View Article and Find Full Text PDFSci Rep
August 2024
Biochemical Process Engineering, Division of Chemical Engineering, Department of Civil, Environmental, and Natural Resources Engineering, Luleå University of Technology, 971‑87, Luleå, Sweden.
Anaerobic digestion (AD) technology can potentially address the gap between energy demand and supply playing a crucial role in the production of sustainable energy from utilization of biogenic waste materials as feedstock. The biogas production from anaerobic digestion is primarily influenced by the chemical compositions and biodegradability of the feedstock. Organosolv-steam explosion offers a constructive approach as a promising pretreatment method for the fractionation of lignocellulosic biomasses delivering high cellulose content.
View Article and Find Full Text PDFACS Sustain Resour Manag
July 2024
Department of Chemistry, Aristotle University of Thessaloniki, 54124 Thessaloniki, Greece.
Appl Microbiol Biotechnol
June 2024
Department of Life Sciences and Biotechnology, University of Ferrara, Via L. Borsari 46, 44121, Ferrara, Italy.
The transition towards a sustainable model, particularly the circular economy, emphasizes the importance of redefining waste as a valuable resource, paving the way for innovative upcycling strategies. The olive oil industry, with its significant output of agricultural waste, offers a promising avenue for high-value biomass conversion into useful products through microbial processes. This study focuses on exploring new, high-value applications for olive leaves waste, utilizing a biotechnological approach with Lactobacillus casei for the production of second-generation lactic acid.
View Article and Find Full Text PDFWorld J Microbiol Biotechnol
May 2024
Department of Forestry and Wood Technology, Linnaeus University, Georg Lückligs Plats 1, 35195, Växjö, Sweden.
Biological pretreatment of wood chips by fungi is a well-known approach prior to mechanical- or chemical pulp production. For this biological approach, a limited number of white-rot fungi with an ability to colonize and selectively degrade lignin are used to pretreat wood chips allowing the remaining cellulose to be processed for further applications. Biopulping is an environmentally friendly technology that can reduce the energy consumption of traditional pulping processes.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!