Differential Adhesive and Bioactive Properties of the Polymeric Surface Coated with Graphene Oxide Thin Film.

ACS Appl Mater Interfaces

Department of Biotechnology, Bhupat and Jyoti Mehta School of Biosciences, Indian Institute of Technology Madras, Chennai 600036, India.

Published: February 2017

Surface engineering of implantable devices involving polymeric biomaterials has become an essential aspect for medical implants. A surface enhancement technique can provide an array of unique surface properties that improve its biocompatibility and functionality as an implant. Polyurethane-based implants that have found extensively acclaimed usage as an implant in biomedical applications, especially in the area of cardiovascular devices, still lack any mechanism to ward off bacterial or platelet adhesion. To bring out such a defense mechanism we are proposing a surface modification technique. Graphene oxide (GO) in very thin film form was wrapped onto the electrospun fibroporous polycarbonate urethane (PCU) membrane (GOPCU) by a simple method of electrospraying. In the present study, we have developed a simple single-step method for coating a polymeric substrate with a thin GO film and evaluated the novel antiadhesive activity of these films. SEM micrographs after coating showed the presence of very thin GO films over the PCU membrane. On the GOPCU surface, the contact angle was shifted by ∼30°, making the hydrophobic PCU surface slightly hydrophilic, while Raman spectral characterization and mapping showed the presence and distribution of GO over 75% of the membrane. A reduced platelet adhesion on the GOPCU surface was observed; meanwhile, bacterial adhesion also got reduced by 85% for Staphylococcus aureus (Gram positive, cocci) and 64% for Pseudomonas aeruginosa (Gram negative, bacilli). A cell adhesion study conducted using mammalian fibroblast cells projected its proliferation percentage in a MTT assay, with 82% cell survival on PCU and 86% on GOPCU after 24 h culture, while a study for an extended period of 72 h showed 87% of survival on PCU and 88% on GOPCU. This plethora of functionalities by a simple modification technique makes thin GO films a self-sufficient surface engineering material for future biomedical applications.

Download full-text PDF

Source
http://dx.doi.org/10.1021/acsami.6b14863DOI Listing

Publication Analysis

Top Keywords

thin film
12
surface
9
graphene oxide
8
oxide thin
8
surface engineering
8
biomedical applications
8
platelet adhesion
8
modification technique
8
pcu membrane
8
membrane gopcu
8

Similar Publications

Cryo-electron microscopy (cryo-EM) is a powerful technique capable of investigating samples in a hydrated state, compared to conventional high-vacuum electron microscopy that requires samples to be completely dry. During the drying process, numerous features and details may be lost due to damage caused by dehydration. Cryo-EM circumvents these problems by cryo-fixing the samples, thereby retaining the intact and original features of hydrated samples.

View Article and Find Full Text PDF

Rationalizing the role of chemical interactions in the precursor solutions on the structure, morphology, and performance of thin-film CuZnSn(S,Se) (CZTSSe) is key for the development of bifacial and other photovoltaic (PV) device architectures designed by scalable solution-based methods. In this study, we uncover the impact of dimethylformamide (DMF) and isopropanol (IPA) solvent mixtures on cation complexation and rheology of the precursor solution, as well as the corresponding morphology, composition, and PV performance of CZTSSe thin-film grown on fluorine-doped tin oxide (FTO). We find that increasing the proportion of IPA leads to a nonlinear increase in dynamic viscosity due to the strong repulsion between DMF and IPA, which is characterized by an interaction cohesion parameter of 3.

View Article and Find Full Text PDF

The diffusive gradient in thin films technique (DGT), with a resin gel based on Lewatit® FO 36 was used for the first time to predict arsenic (As) bioavailability in soils collected in different environmental contexts. The predicted bioavailability, determined by fluxes to DGT, was compared with the bioavailability and bioaccumulation in the plants (Calendula officinalis), where a strong correlation was observed (r = 0.8857 (C/C) and r = 0.

View Article and Find Full Text PDF

Hypothesis: Bubbles oscillating near a free surface are common across numerous systems. Thin liquid films (TLFs) formed between an oscillating bubble and a free surface can exhibit distinct morphological features influenced by interfacial properties, evaporation, and deformation history. We hypothesize that a continuous film presence throughout oscillation results in a wimple morphology, whereas intermittent film presence leads to a dimple formation.

View Article and Find Full Text PDF

Highly Strained Polymeric Monolayer Stacked for Wafer-Scale and Transferable Nanodielectrics.

ACS Nano

December 2024

Key Laboratory of Mesoscopic Chemistry of MOE, School of Chemistry and Chemical Engineering, Nanjing University, Nanjing, Jiangsu, 210023, China.

As the keystones of molecular electronics, high-quality nanodielectric layers are challenging to assemble due to the strictest criteria for their reliability and uniformity over a large area. Here, we report a strained poly(4-vinylphenol) monolayer, ready to be stacked to form defect-free wafer-scale nanodielectrics. The thickness of the nanodielectrics can be precisely adjusted in integral multiples of the 1.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!