Heterogeneous nucleation of catalyst-free InAs nanowires on silicon.

Nanotechnology

NEST, Scuola Normale Superiore and Istituto Nanoscienze-CNR, I-56127 Pisa, Italy.

Published: February 2017

We report on the heterogeneous nucleation of catalyst-free InAs nanowires on Si(111) substrates by chemical beam epitaxy. We show that nanowire nucleation is enhanced by sputtering the silicon substrate with energetic particles. We argue that particle bombardment introduces lattice defects on the silicon surface that serve as preferential nucleation sites. The formation of these nucleation sites can be controlled by the sputtering parameters, allowing the control of nanowire density in a wide range. Nanowire nucleation is accompanied by unwanted parasitic islands, but careful choice of annealing and growth temperature allows us to strongly reduce the relative density of these islands and to realize samples with high nanowire yield.

Download full-text PDF

Source
http://dx.doi.org/10.1088/1361-6528/aa5252DOI Listing

Publication Analysis

Top Keywords

heterogeneous nucleation
8
nucleation catalyst-free
8
catalyst-free inas
8
inas nanowires
8
nanowire nucleation
8
nucleation sites
8
nucleation
5
nanowires silicon
4
silicon report
4
report heterogeneous
4

Similar Publications

Gypsum (CaSO·2HO) plays a critical role in numerous natural and industrial processes. Nevertheless, the underlying mechanisms governing the formation of gypsum crystals on surfaces with diverse chemical properties remain poorly understood due to a lack of sufficient temporal-spatial resolution. Herein, we use in situ microscopy to investigate the real-time gypsum nucleation on self-assembled monolayers (SAMs) terminated with -CH, -hybrid (a combination of NH and COOH), -COOH, -SO, -NH, and -OH functional groups.

View Article and Find Full Text PDF

A molecular ligand separation method based on multivariate metal-organic frameworks (MOF) is developed to precisely regulate CuSn alloy for tuning the selectivity of HCOOH and CO in CO reduction. With this method, the agglomeration and heterogeneous nucleations of metals are effectively inhibited during the electrochemical transformation of CuSn-MOFs into highly pure CuSn alloy. The low Sn content favors CO production, while the high Sn concentration facilitates HCOOH formation.

View Article and Find Full Text PDF

Preparation of anti-shrinkage branched poly (butylene succinate-co-butylene terephthalate)/cellulose nanocrystal foam with excellent degradability and thermal insulation.

Int J Biol Macromol

January 2025

State Key Laboratory of Chemical Engineering, Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, School of Chemical Engineering, East China University of Science and Technology, Shanghai 200237, China. Electronic address:

Branched poly (butylene succinate-co-butylene terephthalate) (BPBST) was synthesized by in-situ polycondensation to enhance the foamability of poly (butylene succinate-co-butylene terephthalate) (PBST) and was blended with cellulose nanocrystals (CNC) to address foam shrinkage. The introduction of 2 wt% CNC increased the crystallization temperature of BPBST from 66.6 °C to 87.

View Article and Find Full Text PDF

All-perovskite tandem solar cells achieving >29% efficiency with improved (100) orientation in wide-bandgap perovskites.

Nat Mater

January 2025

National Laboratory of Solid State Microstructures, Collaborative Innovation Center of Advanced Microstructures, College of Engineering and Applied Sciences, Frontiers Science Center for Critical Earth Material Cycling, Nanjing University, Nanjing, China.

Monolithic all-perovskite tandem solar cells present a promising approach for exceeding the efficiency limit of single-junction solar cells. However, the substantial open-circuit voltage loss in the wide-bandgap perovskite subcell hinders further improvements in power-conversion efficiency. Here we develop wide-bandgap perovskite films with improved (100) crystal orientation that suppress non-radiative recombination.

View Article and Find Full Text PDF

Rethinking primary particulate matter: Integrating filterable and condensable particulate matter in measurement and analysis.

Sci Total Environ

January 2025

Particle Pollution Research and Management Center, Incheon 21999, Republic of Korea; Department of Environmental Engineering, Inha University, Incheon 22212, Republic of Korea. Electronic address:

The current definition of primary particulate matter (PM) encompasses filterable PM (FPM) and condensable PM (CPM), which are evaluated using two distinct conventional measurement methods: cooling and dilution. While the cooling method exclusively considers the homogenous formation of CPM, the dilution method, closer to real-world conditions, neglects FPM characterization. To overcome this limitation, we propose a doubled-dilution system that enables the parallel characterization of both FPM and primary PM without diverting FPM from the CPM formation pathway.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!