The emissions from a fleet of 11 vehicles, including three from the State of Alaska, were tested at 75, 0, and -20 °F with base gasolines and E10 gasolines, that is, gasolines with 10% by volume ethanol added. The data for the changes in emissions for the test run at 75 °F are included, since most other studies on the effects of E10 gasoline on emissions were run at that temperature. The three Alaskan vehicles were also tested at 20 °F. The testing followed the Federal Test Procedure, and regulated emissions-CO, total hydrocarbons (THC), and nitrogen oxides (NO)-CO, speciated organics, and fuel economy were measured. A total of 490 FTP tests were run. The data obtained indicated that with most vehicles, at the temperatures tested, improvements in both CO and THC emissions were obtained with the use of E10 fuel. At the lowest temperature used, -20 °F, most vehicles had an increase in NO emissions with the use of E10 fuel. At the other temperatures, however, more vehicles showed a decrease in NO emissions with the use of E10. With all vehicles at all temperatures tested, the emissions of acetaldehyde increased significantly when E10 fuel was used. The highest increase was about 8 to 1. Benzene, formaldehyde, and 1,3 butadiene showed both increases and decreases in the emissions when using E10 fuel. Unexpected results were obtained with the fuel economy, with about half of the tests showing an increase in fuel economy with the use of E10 fuel.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1080/10473289.1998.10463710 | DOI Listing |
Small
October 2024
College of Chemistry and Molecular Engineering, Qingdao University of Science and Technology, Qingdao, 266042, China.
Ammonia fuel cells using carbon-neutral ammonia as fuel are regarded as a fast, furious, and flexible next-generation carbon-free energy conversion technology, but it is limited by the kinetically sluggish ammonia oxidation reaction (AOR), oxygen reduction reaction (ORR), and hydrogen evolution reaction (HER). Platinum can efficiently drive these three types of reactions, but its scale-up application is limited by its susceptibility to poisoning and high cost. In order to reduce the cost and alleviate poisoning, incorporating Pt with various metals proves to be an efficient and feasible strategy.
View Article and Find Full Text PDFEnviron Sci Pollut Res Int
May 2024
Divisão de Recursos Microbianos, Centro Pluridisciplinar de Pesquisas Químicas, Biológicas E Agrícolas (CPQBA), Universidade Estadual de Campinas (UNICAMP), Paulínia, SP, CEP 13148-218, Brazil.
The use of biofuels has grown in the last decades as a consequence of the direct environmental impacts of fossil fuel use. Elucidating structure, diversity, species interactions, and assembly mechanisms of microbiomes is crucial for understanding the influence of environmental disturbances. However, little is known about how contamination with biofuel/petrofuel blends alters the soil microbiome.
View Article and Find Full Text PDFEnviron Pollut
May 2024
State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing, 100084, China; State Environmental Protection Key Laboratory of Sources and Control of Air Pollution Complex, Beijing, 100084, China. Electronic address:
The Chinese central government has initiated pilot projects to promote the adoption of gasoline containing 10%v ethanol (E10). Vehicle emissions using ethanol blended fuels require investigation to estimate the environmental impacts of the initiative. Five fuel formulations were created using two blending methods (splash blending and match blending) to evaluate the impacts of formulations on speciated volatile organic compounds (VOCs) from exhaust emissions.
View Article and Find Full Text PDFHeliyon
November 2023
Mechanical and Automotive Engineering Technology, University Malaysia Pahang, Pekan 26600, Pahang, Malaysia.
Polyoxymethylene dimethyl ethers (PODEn, n = 1-8) as an oxygenated fuel are a promising alternative fuel with a high oxygen concentration, a low C:H ratio, and no C-C bonds in their chemical structure. This could lead to smoke-free combustion. In this study, we chose to focus on PODE1 because of its lower cetane number, which makes it more suitable for use in spark ignition (SI) engines.
View Article and Find Full Text PDFSci Total Environ
January 2024
State Key Joint Laboratory of Environmental Simulation and Pollution Control, International Joint Laboratory for Regional Pollution Control, Ministry of Education (IJRC), College of Environmental Sciences and Engineering, Peking University, Beijing 100871, PR China.
Improved measurement of new pollutants, particularly intermediate volatility organic compounds (IVOCs), is urgently needed due to the lack of emission data under various operating conditions and potential fuel switching for gasoline engines. This study focused on examining the emission characteristics of IVOCs and the formation of secondary organic aerosols (SOA) in a commercial gasoline direct injection (GDI) engine, considering different fuels and operating conditions. The key findings are as follows: (1) The emission factor (EF) of IVOCs ranged from 2.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!