Two sulfonated polyimide (SPI) thin films were prepared with water and THF/water mixed solvents, respectively. The SPI thin film prepared with THF/water showed more than 5 times higher proton conductivity than that prepared with water mixed solvent at low relative humidity (RH) and 298 K. In this study, polarized optical microscopy (POM), grazing incidence small angle X-ray scattering (GISAXS), and p-polarized multiple angle incidence resolution spectrometry (pMAIRS) were carried out to investigate liquid crystalline (LC) optical ordered structure, organized structure, and molecular orientation. The molecular ordered parts using LC properties in the SPI thin films exhibited an almost identical structure under the low RH condition. On the other hand, the molecular orientation of the imide C=O groups in the non-ordered parts, which could not be detected by POM and GISAXS, showed different angles. The proton conductivity under low RH conditions is affected by the degree of the molecular orientation in the non-ordered parts of the SPI thin films.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.2116/analsci.33.35 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Inter- and Intrasublattice Spin Mixing Conductance of the Antiferromagnetic Spin Pumping Effect in α-Fe_{2}O_{3}/Pt.
Phys Rev Lett
December 2024
Department of Materials Physics, Nagoya University, Nagoya, Aichi 464-8603, Japan.
The spin pumping effect in antiferromagnets, which ultimately converts THz waves into a spin current, is the key physical mechanism leading to an essential function which harnesses the THz technology and spintronics. Here, we report thorough experimental investigations of the spin current induced by the antiferromagnetic spin pumping effect in epitaxial α-Fe_{2}O_{3} thin films having two distinct dynamic modes and unambiguously show that both the inter- and intrasublattice spin mixing conductance are equally substantial. Our experimental insight is an important advance for understanding the physics of transduction between the spin current and the staggered magnetization dynamics at THz frequency.
View Article and Find Full Text PDFSelf-Intercalation as Origin of High-Temperature Ferromagnetism in Epitaxially Grown Fe_{5}GeTe_{2} Thin Films.
Phys Rev Lett
December 2024
Institute of Molecular Science, University of Valencia, Catedratico Jose Beltrán 2, 46980 Paterna, Spain.
The role of self-intercalation in 2D van der Waals materials is key to the understanding of many of their properties. Here we show that the magnetic ordering temperature of thin films of the 2D ferromagnet Fe_{5}GeTe_{2} is substantially increased by self-intercalated Fe that resides in the van der Waals gaps. The epitaxial films were prepared by molecular beam epitaxy and their magnetic properties explored by element-specific x-ray magnetic circular dichroism that showed ferromagnetic ordering up to 375 K.
View Article and Find Full Text PDF"Stabilization" of Amorphous Ketoprofen in Thin Films.
Langmuir
January 2025
Univ. Rouen Normandie, Normandie Univ., SMS, UR 3233, F-76000 Rouen, France.
It has been shown that depositing ketoprofen as thin films on glass substrates has a stabilizing effect on the amorphous state of ketoprofen. Polyethylene glycol ( = 6000 g/mol) was mixed with ketoprofen in a wide range of concentrations. Amorphous thin films were prepared by spin coating and subjected to storage conditions with different levels of relative humidity.
View Article and Find Full Text PDFAn integrated magnetoimpedance biosensor microfluidic magnetic platform for the evaluation of the cardiac marker cTnI.
Anal Methods
January 2025
Microelectronic Research & Development Center, School of Mechatronics Engineering and Automation, Shanghai University, Shanghai 200444, China.
An integrated magnetoimpedance (MI) biosensor microfluidic magnetic platform was proposed for the evaluation of the cardiac marker, cardiac troponin I (cTnI). This bioanalyte evaluation platform mainly comprised three external permanent magnets (PMs), one MI element, two peelable SiO film units and a microfluidic chip (MFC). The MI element was made of micro-electro-mechanical system (MEMS)-based multilayered [Ti (6 nm)/FeNi (100 nm)]/Cu (400 nm)/[Ti (6 nm)/FeNi (100 nm)] thin films and designed as meander structures with closed magnetic flux.
View Article and Find Full Text PDFTuning the optical, electrical, and structural properties of Cu-DLC thin films via simultaneous DC-RF unbalanced magnetron sputtering.
Heliyon
November 2024
Faculty of Physics, Shahrood University of Technology, 3619995161, Shahrood, Iran.
This study evaluates the deposition of diamond-like carbon (DLC) films with copper impurities on a glass substrate using simultaneous direct current (DC) and radio frequency (RF) magnetron sputtering. The structural, optical, electrical, and mechanical properties, as well as the surface topography of the films, were investigated under various DC power levels using Raman spectroscopy, ellipsometry, UV-VIS, I-V measurements, nanoindentation, AFM, and FESEM. Results indicate that increasing the DC power to the graphite target from 60 to 120 , while maintaining a constant 10 of RF power to the copper target, enhances the optical absorption coefficient of the films and increases the optical bandgap from 0.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!