Photovoltaic cells based on arrays of semiconductor nanowires promise efficiencies comparable or even better than their planar counterparts with much less material. One reason for the high efficiencies is their large absorption cross section, but until recently the photocurrent has been limited to less than 70% of the theoretical maximum. Here we enhance the absorption in indium phosphide (InP) nanowire solar cells by employing broadband forward scattering of self-aligned nanoparticles on top of the transparent top contact layer. This results in a nanowire solar cell with a photovoltaic conversion efficiency of 17.8% and a short-circuit current of 29.3 mA/cm under 1 sun illumination, which is the highest reported so far for nanowire solar cells and among the highest reported for III-V solar cells. We also measure the angle-dependent photocurrent, using time-reversed Fourier microscopy, and demonstrate a broadband and omnidirectional absorption enhancement for unpolarized light up to 60° with a wavelength average of 12% due to Mie scattering. These results unambiguously demonstrate the potential of semiconductor nanowires as nanostructures for the next generation of photovoltaic devices.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1021/acsnano.6b06874 | DOI Listing |
Small Methods
December 2024
Chongqing Key Laboratory of Photo-Electric Functional Materials and Laser Technology, College of Physics and Electronic Engineering, Chongqing Normal University, Chongqing, 401331, P. R. China.
The continuous advancements in ultraviolet-C (UV-C) optoelectronics are poised to meet the growing demand for efficient and innovative optoelectronic devices, particularly in image sensing and neural communication. This study proposes a low-cost tube sealing and muffle calcination process for the catalyst-free synthesis of polymorphic β-GaO nanomaterials. These nanomaterials are synthesized via a vapor-solid (VS) growth mechanism, enabling the formation of high-quality nanowires (NWs), nanobelts (NBs), and nanosheets (NSs).
View Article and Find Full Text PDFSci Bull (Beijing)
November 2024
Key Laboratory for Power Machinery and Engineering of Ministry of Education, Research Center for Renewable Synthetic Fuel, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China. Electronic address:
Solar-driven overall conversion of CO and HO into fuels and chemicals shows an ultimate strategy for carbon neutrality yet remains a huge challenge. Herein, an integrated photocatalytic redox architecture of Zn NPs/GaN Nanowires (NWs)/Si is explored for light-driven overall conversion of CO and HO into CH and HO simultaneously without any external sacrificial agents and additives. The as-designed architecture affords a benchmark CH activity of 189 mmol g h with a high selectivity of 93.
View Article and Find Full Text PDFMicromachines (Basel)
October 2024
CENIMAT|i3N, Department of Materials Science, School of Science and Technology, NOVA University Lisbon and CEMOP/UNINOVA, Campus de Caparica, 2829-516 Caparica, Portugal.
The production of cost-effective novel materials for PV solar cells with long-term stability, high energy conversion efficiency, enhanced photon absorption, and easy electron transport has stimulated great interest in the research community over the last decades. In the presented work, Cu/CuS-MWCNTs nanocomposites were produced and analyzed in the framework of potential applications for PV solar cells. Firstly, the surface of the produced one-dimensional Cu was covered by CuS nanoflake.
View Article and Find Full Text PDFAn integrated photovoltaic antenna based on a lateral nanowire array solar cell and metal mesh is proposed and studied by three-dimensional electromagnetic simulation. The results show that the integration of the metal meshed antenna significantly enhances the absorption of the nanowire array due to the diffraction effects of the two-dimensional grating and the excitation of localized surface plasmons. By optimizing the nanowire diameter, antenna linewidth, and gap between them, the integrated solar cell achieves a maximum conversion efficiency of 11.
View Article and Find Full Text PDFNatl Sci Rev
December 2024
Department of Chemistry, Southern University of Science and Technology, Shenzhen 518055, China.
Electronic perturbation of the surfaces of Cu catalysts is crucial for optimizing electrochemical CO reduction activity, yet still poses great challenges. Herein, nanostructured Cu nanowires (NW) with fine-tuned surface electronic structure are achieved via surface encapsulation with electron-withdrawing (-F) and -donating (-Me) group-functionalized graphdiynes (R-GDY, R = -F and -Me) and the resulting catalysts, denoted as R-GDY/Cu NW, display distinct CO reduction performances. electrochemical spectroscopy revealed that the *CO (a key intermediate of the CO reduction reaction) binding affinity and consequent *CO coverage positively correlate with the Cu surface oxidation state, leading to favorable C-C coupling on F-GDY/Cu NW over Me-GDY/Cu NW.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!