This study describes two major adaptations for the preparation of resin casts in human cirrhotic liver, harvested at the time of transplantation. The first is the way of fixing the catheter in the ostia of the hepatic and portal veins through a cerclage, so as to prevent displacement of the catheter and / or leakage of the resin during its injection. The second is the extension of corrosion time in the NaOH solution, averaging 6.8 days, with daily replacement the solution until complete removal of parenchymal tissue. We applied the method in 14 cirrhotic livers, with good filling and coloring of the portal and hepatic vein territories, using different colors. This allows an anatomical study of these vessels, able to complement the knowledge of the histopathology in research work, and the planning of therapeutic procedures, such as the Trans-Jugular Intrahepatic Port-Systemic Shunt (TIPS). RESUMO Este estudo descreve duas importantes adaptações para o preparo de moldes de resina em fígado humano cirrótico, captado no momento do transplante: a primeira, é a maneira de fixação dos cateteres nos "óstios" das veias hepáticas e porta, através de uma "cerclagem" dos mesmos, de modo a evitar o deslocamento do cateter e/ou extravasamento da resina durante sua injeção, e a segunda, é o prolongamento do tempo de corrosão na solução de NaOH, atingindo a média de 6,8 dias, com a substituição diária da solução, até a remoção completa do tecido parenquimatoso. O método foi empregado em 14 fígados cirróticos com bom preenchimento e coloração dos territórios das veias porta e hepáticas, utilizando cores distintas. Isto permite um estudo anatômico desses vasos, capaz de complementar os conhecimentos da histopatologia em trabalhos de pesquisa, e planejar procedimentos terapêuticos como a derivação porto-sistêmica intra-hepática transjugular (TIPS - Transjugular Intrahepatic Postosystemic Shunt).

Download full-text PDF

Source
http://dx.doi.org/10.1590/0100-69912016005011DOI Listing

Publication Analysis

Top Keywords

resin casts
8
cirrhotic liver
8
das veias
8
modified technique
4
technique preparation
4
preparation venous
4
venous circulation
4
circulation resin
4
casts cirrhotic
4
liver study
4

Similar Publications

Characterization of a biocomposite film using coconut jelly powder to improve arrowroot starch and sodium alginate film forming properties.

Int J Biol Macromol

December 2024

Department of Marine, Faculty of Fisheries and Marine, Universitas Airlangga, Campus C UNAIR, Mulyorejo, Surabaya 60115, Indonesia; Research Group of Post-harvest, Processing Technology, and Bioproducts, Faculty of Fisheries and Marine, Universitas Airlangga, Mulyorejo, Surabaya 60115, Indonesia. Electronic address:

Composite polymers are promising solution to structural setbacks of starch and alginate-based films due to their hydrophilic attributes. Hence, this study aimed to investigate young coconut jelly powder (CJP), an under-utilized by-waste, as a filler using the casting method to develop a novel biocomposite from increments of CJP (1-3 %) to a blended resin of arrowroot starch, sodium alginate, and glycerol. Moreover, the films were characterized by physicomechanical (visual aspect, thickness, color, moisture content, tensile strength, and elongation at break); surface microstructure; water barrier (water vapor permeability, water solubility, and water activities); thermal, crystallinity, and functional group properties; soil, river water, and seawater biodegradability; and coating application in cherry tomato.

View Article and Find Full Text PDF

Purpose: This study was aimed to compare the difference between iRoot SP and AH Plus on root canal sealing ability for teeth extracted due to severe periodontitis and explore whether the dentin tubule pathway plays an important role in the development of endodontic-periodontic lesions(EPL), in order to provide a theoretical basis for selection of proper time for root canal therapy and suitable root canal sealants in patients with EPL.

Methods: Fifty single-root anterior teeth extracted due to severe periodontitis were selected. The roots were completely debrided to remove the calculus, dental plaque and cementum.

View Article and Find Full Text PDF

Investigation of Stereolithography Additively Manufactured Components for Deviations in Dimensional and Geometrical Features.

Polymers (Basel)

November 2024

Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan.

The rapid investment casting (RIC) process requires a 3D-printed pattern to create a ceramic mold. Stereolithography (SLA) is a commonly used 3D printing method for pattern creation due to its ability to print complex shapes with smooth surfaces. The printing parameters can significantly affect the dimensional accuracy of the pattern.

View Article and Find Full Text PDF

Background: The purpose of this study was to evaluate the efficacy of selective laser sintering (SLS) against the traditional casting method in fabricating customized Co-Cr dental posts, employing 3D coordinate metrology for analysis.

Methods: A 10 mm post space was prepared in a transparent acrylic block using a red ParaPost XP drill (1.25 mm diameter).

View Article and Find Full Text PDF

Additive manufacturing offers great potential for various industrial solutions; in particular, the binder jetting method enables the production of components from various materials, including sand molds for casting. This work presents the results of an extensive set of experiments aimed at enhancing the structural strengthening of 3D-printed sand molds. Structural strengthening was achieved by impregnating the sand-printed structures with two polymer materials: epoxy resin and silicone varnish.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!