Rice Husk Ash-Derived Silica Nanofluids: Synthesis and Stability Study.

Nanoscale Res Lett

Zhejiang Provincal Key Laboratory of Biofuel, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou, 310014, China.

Published: December 2016

Nanofluids, colloidal suspensions consisting of base fluids and nanoparticles, are a new generation of engineering working fluids. Nanofluids have shown great potential in heat/mass transfer applications. However, their practical applications are limited by the high production cost and low stability. In this study, a low-cost agricultural waste, rice husk ash (RHA), was used as a silicon source to the synthesis of silica nanofluids. First, silica nanoparticles with an average size of 47 nm were synthesized. Next, by dispersing the silica nanoparticles in water with ultrasonic vibration, silica nanofluids were formed. The results indicated that the dispersibility and stability of nanofluids were highly dependent on sonication time and power, dispersant types and concentrations, as well as pH; an optimal experiment condition could result in the highest stability of silica nanofluid. After 7 days storage, the nanofluid showed no sedimentation, unchanged particle size, and zeta potential. The results of this study demonstrated that there is a great potential for the use of RHA as a low-cost renewable resource for the production of stable silica nanofluids. Graphical Abstract Rice husk ash was used as a low-cost renewable resource for production of silica nanofluids with high stability.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5110453PMC
http://dx.doi.org/10.1186/s11671-016-1726-9DOI Listing

Publication Analysis

Top Keywords

silica nanofluids
20
rice husk
12
silica
8
nanofluids
8
stability study
8
great potential
8
husk ash
8
silica nanoparticles
8
low-cost renewable
8
renewable resource
8

Similar Publications

Because a significant portion of oil remains in carbonate reservoirs, efficient techniques are essential to increase oil recovery from carbonate reservoirs. Wettability alteration is crucial for enhanced oil recovery (EOR) from oil-wet reservoirs. This study investigates the impact of different substances on the wettability of dolomite and calcite rocks.

View Article and Find Full Text PDF

This study explores the thermal conductivity and viscosity of water-based nanofluids containing silicon dioxide, graphene oxide, titanium dioxide, and their hybrids across various concentrations (0 to 1 vol%) and temperatures (30 to 60 °C). The nanofluids, characterized using multiple methods, exhibited increased viscosity and thermal conductivity compared to water, with hybrid nanofluids showing superior performance. Graphene oxide nanofluids displayed the highest thermal conductivity and viscosity ratios, with increases of 52% and 177% at 60 °C and 30 °C, respectively, for a concentration of 1 vol% compared to base fluid.

View Article and Find Full Text PDF

This article investigates the convective thermal and solutal exchange from the active walls of a trapezium chamber which is filled with multi-walled carbon nanotubes (MWCNT)-silicon dioxide (SiO)-ethylene glycol-water hybrid nano-coolant. The hybrid nano-coolant exhibits non-Newtonian shear-thinning rheology and is modeled by the power-law viscosity as per an exploratory report. The convection is generated by both the thermal and solutal buoyancy forces in the presence of a magnetic field.

View Article and Find Full Text PDF

The optimal design of cement slurry by balancing various cement additives and cement is critical for effective oil well cementation job. However, given adverse circumstances of application, existing additives may not be sufficient to perform suitably in challenging conditions, leading to premature cement hydration, formation of microcracks, and gas channeling pathways. Thus, this study explores the use of a single-step silica nanofluid (NP size: 5-10, 90-100, and 250-300 nm and concentration: 1, 3, and 5 wt %) as an additive and explores its effect on thickening time, fluid loss, and rheological behavior of class G cement slurry at high-pressure and high-temperature (HPHT) conditions (135 °C and 3625 psi).

View Article and Find Full Text PDF

Nanofluidics has made significant impacts and advancements in various fields, including ultrafiltration, water desalination, biomedical applications, and energy conversion. These advancements are driven by the distinct behavior of fluids at the nanoscale, where the solid-fluid interaction characteristic lengthscale is in the same order of magnitude as the flow conduits. A key challenge in nanofluidics is understanding hydrodynamic slip, a phenomenon in which fluids flow past solid boundaries with a non-zero surface velocity, deviating from the classical no-slip boundary condition.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!