Statement Of Problem: Abutments with a zirconia superstructure and a titanium insert have recently become popular. Although they have been tested under static load, their performance under simulated mastication is not well known.
Purpose: The purpose of this in vitro study was to compare the cyclic load to failure of 3 types of zirconia abutments with different mechanisms of retention of the zirconia to the titanium interface.
Material And Methods: Fifteen implants (n=5 per system) and abutments (3 groups: 5 friction fit [Frft]; 5 bonded; and 5 titanium ring friction fit [Ringfrft]) were used. Abutments were thermocycled in water between 5°C and 55°C for 15000 cycles and then cyclically loaded for 20000 cycles or until failure at a frequency of 2 Hz by using a sequentially increased loading protocol up to a maximum of 720 N. The load to failure for each group was recorded, and 1-way analysis of variance was performed.
Results: The mean load-to-failure values for the Frft group was 526 N, for the Bond group 605 N, and for the Ringfrft group 288 N. A statistically significant difference was found among all abutments tested (P<.05).
Conclusions: Abutments with the bonded connection showed the highest load-to-failure value, and the abutment with the titanium ring friction fit connection showed the lowest load-to-failure value.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.prosdent.2016.09.008 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Bayesian Architecture for Predictive Monitoring of Unbalance Faults in a Turbine Rotor-Bearing System.
Sensors (Basel)
December 2024
Department of Mechanical Engineering, Ming Chi University of Technology, New Taipei City 24301, Taiwan.
Unbalance faults are among the common causes of interruptions and unexpected failures in rotary systems. Therefore, monitoring unbalance faults is essential for predictive maintenance. While conventional time-invariant mathematical models can assess the impact of these faults, they often rely on proper assumptions of system factors like bearing stiffness and damping characteristics.
View Article and Find Full Text PDFTemporal Logical Attention Network for Log-Based Anomaly Detection in Distributed Systems.
Sensors (Basel)
December 2024
Department of Computer Science, University of Bristol, Bristol BS8 1QU, UK.
Detecting anomalies in distributed systems through log analysis remains challenging due to the complex temporal dependencies between log events, the diverse manifestation of system states, and the intricate causal relationships across distributed components. This paper introduces a TLAN (Temporal Logical Attention Network), a novel deep learning framework that integrates temporal sequence modeling with logical dependency analysis for robust anomaly detection in distributed system logs. Our approach makes three key contributions: (1) a temporal logical attention mechanism that explicitly models both time-series patterns and logical dependencies between log events across distributed components, (2) a multi-scale feature extraction module that captures system behaviors at different temporal granularities while preserving causal relationships, and (3) an adaptive threshold strategy that dynamically adjusts detection sensitivity based on system load and component interactions.
View Article and Find Full Text PDFAn Experimental Study of the Flexural Bearing Capacity of Reinforced Concrete Beams Damaged by Explosions Using Piezoelectric Smart Aggregates.
Sensors (Basel)
December 2024
School of Safety Science and Emergency Management, Wuhan University of Technology, Wuhan 430064, China.
Two identically sized RC beams were fabricated to investigate the effects of explosive loads on the flexural behaviour of Reinforced Concrete (RC) beams. One of the beams was subjected to an explosive load to induce post-explosion damage, and subsequently, both beams underwent flexural capacity testing. Integrating piezoelectric smart aggregates (SAas) within the beams facilitated continuous observation of the damage conditions, allowing for the assessment of internal concrete deterioration from explosive impacts to bending failures.
View Article and Find Full Text PDFFailure Behavior of Nano-Metakaolin Concrete Under Splitting Tension Based on Digital Image Correlation Method.
Polymers (Basel)
December 2024
Institute of Road and Bridge Engineering, Dalian Maritime University, Dalian 116026, China.
Nano metakaolin (NMK) has attracted considerable interest for its potential to improve the durability of cementitious materials. However, the effect of NMK on the splitting tensile performance of concrete has not been systematically investigated. This study investigates the splitting tensile performance of NMK concrete and analyzes its failure behavior under splitting load.
View Article and Find Full Text PDFAcute Co-Ingestion of Caffeine and Sodium Bicarbonate on Muscular Endurance Performance.
Nutrients
December 2024
Departamento de Ciencias Biomédicas, Área de Educación Física y Deportiva, Facultad de Medicina y Ciencias de la Salud, Universidad de Alcalá, 28801 Madrid, Spain.
Caffeine and sodium bicarbonate individually enhance muscular endurance by delaying fatigue, but their combined effects have scarcely been studied. : This study aimed to evaluate the acute effects of co-ingesting caffeine and sodium bicarbonate on muscular endurance at different loads in bench press and back squat exercises. : Twenty-seven recreationally trained participants (female/male: 14/14; age: 23 ± 3.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!