The color uniformity (CU) of chip-on-board (COB) white light emitting diodes (WLEDs) has been improved by using remote phosphor films with two freeform surfaces (TFS-RPFs). The finite-difference time-domain (FDTD), Monte Carlo ray-tracing, and color-thickness feedback (CTFB) methods were used to design the TFS-RPFs: the blue light distribution of COB WLEDs is greatly affected by the angular thickness distribution of TFS-RPFs, and a high CU can be achieved iteratively. The directional inconsistency of incident and emergent blue light, scattering effect of TFS-RPFs, and illumination characteristics of the COB source were also investigated. COB WLEDs containing optimized TFS-RPFs achieved high CU with a decrease of 26.2% in maximum CCT deviation; thus, TFS-RPFs can improve the CU of COB WLEDs.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1364/OE.24.023685 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Low-Yellowing Phosphor-in-Glass for High-Power Chip-on-board White LEDs by Optimizing a Low-Melting Sn-P-F-O Glass Matrix.
Sci Rep
May 2018
Department of Chemistry, Kookmin University, Seoul, 136-702, Republic of Korea.
We introduce a low-melting-point (MP) Sn-P-F-O glass ceramic material into the phosphor-in-glass (PIG) material to realize an 'on-chip' chip-on-board (COB) type of phosphor-converted (pc) white light-emitting diode (WLED) with green (BaSr)SiO:Eu and red (SrCa)AlSiN:Eu (SCASN) phosphors. The optimum Sn-P-F-O-based ceramic components can be sintered into the glass phase with a facile one-step heating process at 285 °C for 1 min. Specifically, these soft-fabrication conditions can be optimized to minimize the degradation of the luminescent properties of the red SCASN phosphor as well as the green silicate phosphor in PIG-based white COB-type pc-LEDs owing to the low thermal loss of the phosphors at low fabrication temperatures below 300 °C.
View Article and Find Full Text PDFThe color uniformity (CU) of chip-on-board (COB) white light emitting diodes (WLEDs) has been improved by using remote phosphor films with two freeform surfaces (TFS-RPFs). The finite-difference time-domain (FDTD), Monte Carlo ray-tracing, and color-thickness feedback (CTFB) methods were used to design the TFS-RPFs: the blue light distribution of COB WLEDs is greatly affected by the angular thickness distribution of TFS-RPFs, and a high CU can be achieved iteratively. The directional inconsistency of incident and emergent blue light, scattering effect of TFS-RPFs, and illumination characteristics of the COB source were also investigated.
View Article and Find Full Text PDFHighly thermally stable single-component white-emitting silicate glass for organic-resin-free white-light-emitting diodes.
ACS Appl Mater Interfaces
February 2014
Ministry of Education Key Laboratory of Bioinorganic and Synthetic Chemistry, State Key Laboratory of Optoelectronic Materials and Technologies, KLGHEI of Environment and Energy Chemistry, School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou, Guangdong 510275, P.R. China.
Thermal management is still a great challenge for high-power phosphor-converted white-light-emitting diodes (pc-WLEDs) intended for future general lighting. In this paper, a series of single-component white-emitting silicate SiO2-Li2O-SrO-Al2O3-K2O-P2O5: Ce(3+), Tb(3+), Mn(2+) (SLSAKP: Ce(3+), Tb(3+), Mn(2+)) glasses that simultaneously play key roles as a luminescent convertor and an encapsulating material for WLEDs were prepared via the conventional melt-quenching method, and systematically studied using their absorption spectra, transmittance spectra, photoluminescence excitation and emission spectra in the temperature range 296-498 K, decay curves, and quantum efficiency. The glasses show strong and broad absorption in 250-380 nm region and exhibit intense white emission, produced by in situ mixing of blue-violet, green, and orange-red light from Ce(3+), Tb(3+), and Mn(2+) ions, respectively, in a single glass component.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!