The 3D-printed boluses were used during the radiation therapy of the chest wall in six patients with breast cancer after modified radical mastectomy (MRM). We measured the in-vivo skin doses while both conventional and 3D-printed boluses were placed on the chest wall and compared the mean doses delivered to the ipsilateral lung and the heart. The homogeneity and conformity of the dose distribution in the chest wall for both types of boluses were also evaluated. The uniformity index on the chest skin was improved when the 3D-printed boluses were used, with the overall average skin dose being closer to the prescribed one in the former case (-0.47% versus -4.43%). On comparing the dose-volume histogram (DVH), it was found that the 3D-printed boluses resulted in a reduction in the mean dose to the ipsilateral lung by up to 20%. The precision of dose delivery was improved by 3% with the 3D-printed boluses; in contrast, the conventional step bolus resulted in a precision level of 5%. In conclusion, the use of the 3D-printed boluses resulted in better dose homogeneity and conformity to the chest wall as well as the sparing of the normal organs, especially the lung. This suggested that their routine use on the chest wall as a therapeutic approach during post-mastectomy radiation therapy offers numerous advantages over conventional step boluses.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5421959 | PMC |
| http://dx.doi.org/10.18632/oncotarget.12829 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Body contour adaptation for weight-loss and bolus for head and neck radiotherapy on Ethos version 2.0 and HyperSight: Synthetic CT versus direct calculation.
J Appl Clin Med Phys
December 2024
Department of Physics and Atmospheric Sciences, Dalhousie University, Halifax, Canada.
Purpose: In radiotherapy, body contour inaccuracies may compromise the delineation of adjacent structures and affect calculated dose. Here, we evaluate the un-editable body contours auto-generated by Ethos versions 1.0 (v1) and 2.
View Article and Find Full Text PDFExploring the impact of filament density on the responsiveness of 3D-Printed bolus materials for high-energy photon radiotherapy.
Phys Med
November 2024
Faculty of Physics, Babeș-Bolyai University, Cluj-Napoca, Romania. Electronic address:
Background: 3D-printed boluses in radiation therapy receive consideration for their ability to enhance treatment precision and patient comfort. Yet, thorough validation of 3D-printed boluses using various validation procedures and statistical analysis is missing. This study aims to determine the effectiveness of using 3D-printed boluses in radiation therapy.
View Article and Find Full Text PDFCharacterization of brass mesh bolus for electron beam therapy.
Biomed Phys Eng Express
October 2024
Department of Radiation Oncology, Northwestern University, Chicago, IL, 60611, United States of America.
Article Synopsis
- - Brass mesh boluses are used to minimize air gaps on complex body surfaces during radiation therapy, improving dosimetry for targeting tumors near the skin, especially in patients requiring electron radiation.
- - A study investigated the dosimetric properties of brass mesh boluses for 6, 9, and 12 MeV electrons, revealing that these boluses can significantly increase the surface dose, ranging from 94% of the dose at a defined depth based on the electron energy used.
- - Results showed that the brass mesh bolus is comparably effective to traditional water-equivalent boluses, and modeling in treatment planning systems (TPS) aligns closely with the measured data, suggesting they can enhance treatment efficiency for electron therapy protocols.
Use of 3D printing technology for custom bolus fabrication in the management of palmar or plantar fibromatosis with radiotherapy: A retrospective case series.
J Med Imaging Radiat Sci
December 2024
Department of Radiation Oncology, CancerCare Manitoba, Winnipeg, MB, Canada. Electronic address:
Article Synopsis
- Palmar or plantar fibromatosis is a benign condition that can impair hand or foot function, and while surgery is common, radiation therapy (RT) can also be effective in managing symptoms.
- A study involved three patients receiving RT for fibromatosis, using custom-designed 3D-printed boluses created from CT imaging to enhance treatment effectiveness.
- The results showed the printed boluses had very minimal shape deviations, good density accuracy, and no significant issues during treatment, indicating that 3D printing could improve RT dosimetry for this condition.
Evaluating the performance of thermoplastic 3D bolus used in radiation therapy.
Appl Radiat Isot
July 2024
Department of Radiological Science, Kangwon National University, South Korea. Electronic address:
A 3D-printed bolus is being developed to deliver accurate doses to superficial cancers. In this study, flexible thermoplastic filaments, specifically PLA, TPU, PETG, and HIPS, were fabricated into boluses and then compared to commercial bolus for the variation of the dose elevation region of photon beams. The experimental results indicate that the maximum dose depth is similar, and the consistent trend of the percentage depth dose confirms the potential usage as a build-up bolus.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!