As the essential element of a triboelectric nanogenerator (TENG), friction layers play key roles that determine the device performance, which can be enhanced by material selection and surface modification. In this work, we have embedded aligned carbon nanotubes (CNTs) on the polydimethylsiloxane (PDMS) surface as the effective dielectric layer to donate electrons. This layer not only increases the electron generation for the output, but also shows notable stretchability. The length and the properties of the aligned CNTs can be controlled precisely. Using the 40 μm CNT as an example, the fabricated CNT-PDMS TENG shows an output voltage of 150 V and a current density of 60 mA m, which are 250% and 300% enhancement compared to the TENG using directly doped PDMS/multiwall carbon nanotubes, respectively. The maximum power density of this TENG reaches 4.62 W m at an external load of 30 MΩ. The TENG has demonstrated superior stability during cyclic measurement of over 12 000 cycles. Besides, the aligned CNT-PDMS film shows superhydrophobicity (154°) and good sheet resistance of 280 Ω sq. This stretchable aligned CNT-PDMS film can be universally utilized as a positive triboelectric layer pairing with polymeric materials such as polyethylene terephthalate, polyimide, PDMS and polytetrafluoroethylene for TENGs. This work provides an effective method of structure design for flexible and stretchable nanogenerators.
Download full-text PDF |
Source |
---|---|
http://dx.doi.org/10.1039/c6nr06319e | DOI Listing |
Commun Chem
January 2025
Institute of Physics, Albert-Ludwig-University of Freiburg, Freiburg, Germany.
The interplay between attractive London dispersion forces and steric effects due to repulsive forces resulting from the Pauli principle often determines the geometry and stability of nanostructures. Aromatic polyimides (PI) and carbon nanotubes (CNT) were chosen as building blocks as two components in the hetero delocalized electron nanostructures. Two PIs, having the same diamine part and different linkage substituents between two phenyl rings of dianhydride part, one linked with ether bond (C-O-C) (OPI), the other with C-(CF3)2 (FPI), were investigated.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Desalination Technology Institute, King Abdulaziz City for Science and Technology, Riyadh 12354, Saudi Arabia.
Biomass, as a source of lignocellulose, can be valorized into carbon micro/nanofibers for adsorbing greenhouse gas (GHGs) emissions, especially CO. This article is derived from systematic evidence evaluation of published studies, presenting new, innovative, and systemic approaches to lignocellulose-based carbon micro/nanofiber studies. The review covers a general overview of carbon micro/nanofiber studies, mapping chronicles of the studies, carbon micro/nanofiber types for CO uptake, carbon micro/nanofibers fabrication and characterization, obtained carbonaceous material activation and performances, regulatory frameworks, and sustainability.
View Article and Find Full Text PDFInt J Biol Macromol
January 2025
Department of Physics, Hasanuddin University, Makassar 90245, Indonesia. Electronic address:
The increasing reliance on electronic devices has created a pressing demand for high-performance and sustainable electromagnetic interference shielding materials. While conventional materials, such as metals and carbon-based composites, offer excellent shielding capabilities, they are hindered by high costs, environmental concerns, and limitations in scalability. Polysaccharide-based materials, including cellulose, chitosan, and alginate, represent a promising alternative due to their biodegradability, renewability, and versatility.
View Article and Find Full Text PDFJ Sep Sci
January 2025
Herbal and Traditional Medicines Research Center, Kerman University of Medical Sciences, Kerman, Iran.
Polycyclic aromatic hydrocarbons (PAHs) are carcinogenic compounds resulting from incomplete burning of organic materials. This work describes the successful layer-by-layer fabrication of a novel zinc oxide nanocomposite made of zinc oxide nanoparticles, aniline, sodium dodecyl sulfate, and modified multi-walled carbon nanotubes on a stainless steel wire by electrodeposition. The coating and extraction conditions were screened, optimized, and validated using factorial design and central composite design, respectively.
View Article and Find Full Text PDFPharmaceutics
January 2025
Department of Medicinal Plants, Faculty of Agriculture and Natural Resources, Arak University, Arak 38156-8-8349, Iran.
In the 21st century, thanks to advances in biotechnology and developing pharmaceutical technology, significant progress is being made in effective drug design. Drug targeting aims to ensure that the drug acts only in the pathological area; it is defined as the ability to accumulate selectively and quantitatively in the target tissue or organ, regardless of the chemical structure of the active drug substance and the method of administration. With drug targeting, conventional, biotechnological and gene-derived drugs target the body's organs, tissues, and cells that can be selectively transported to specific regions.
View Article and Find Full Text PDFEnter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!