Carbon-based suspension electrodes are currently intensively investigated for emerging electrochemical systems, such as flow batteries, flow capacitors, and capacitive deionization cells. The main limitation of such electrodes is their low electric conductivity, which is typically orders of magnitude lower than that of traditional static carbon electrodes. Two main categories of suspension electrodes exist: 1) slurry electrodes where particles are not significantly affected by gravity, and 2) fluidized bed electrodes where particles are affected by gravity. We introduce a novel category that we term "combined" suspension electrodes, which combine dilute slurries and dense fluidized beds. We present experimental measurements of the electrochemical impedance and electric conductivity of two combined electrodes. For one set of materials, the measured electric conductivity of the combined electrode is at least an order of magnitude above the fluidized bed and slurry components alone, demonstrating that a synergetic effect can be achieved when adding dilute slurry to dense fluidized bed. For a second set of materials, results show that the combined electrode conductivity is lower than the slurry component alone, a counter-intuitive result, demonstrating that increasing electrode carbon loading does not always enhance the electric conductivity.

Download full-text PDF

Source
http://dx.doi.org/10.1002/cssc.201601008DOI Listing

Publication Analysis

Top Keywords

suspension electrodes
16
electric conductivity
16
fluidized beds
8
electrodes
8
electrodes particles
8
particles gravity
8
dense fluidized
8
conductivity combined
8
set materials
8
combined electrode
8

Similar Publications

Fully Inkjet-Printed Flexible Graphene-Prussian Blue Platform for Electrochemical Biosensing.

Biosensors (Basel)

January 2025

University of Zagreb, Faculty of Chemical Engineering & Technology, Trg Marka Marulića 19, 10000 Zagreb, Croatia.

Prussian Blue (PB) is commonly incorporated into screen-printed enzymatic devices since it enables the determination of the enzymatically produced hydrogen peroxide at low potentials. Inkjet printing is gaining popularity in the development of electrochemical sensors as a substitute for screen printing. This work presents a fully inkjet-printed graphene-Prussian Blue platform, which can be paired with oxidase enzymes to prepare a biosensor of choice.

View Article and Find Full Text PDF

Realizing fast charging in high-specific-energy lithium metal batteries (LMBs) remains a significant challenge. Here, a oleophilic garnet suspension electrolyte design is reported, using inorganic solid electrolyte modified by low-surface-energy 1H,1H,2H,2H-perfluorooctyl trichlorosilane (PFOTS), to address the dilemma of fast charging and high specific energy in LMBs. With the oleophilic suspension electrolytes, the ionic conductivity of carbonate electrolyte is increased by ≈20%.

View Article and Find Full Text PDF

Understanding how to tune the properties of electroactive materials is a key parameter for their applications in energy storage systems. This work presents a comprehensive study in tailoring polyaniline (PANI) suspensions by acid-assisted polymerization method and their subsequent deposition on boron-doped diamond (BDD) supports with low/high B concentrations. The porous or densely packed morphology of PANI is successfully controlled by varying the monomer-to-initiator ratio.

View Article and Find Full Text PDF

An Ultrasensitive Ethanol Gas Sensor Based on a Dual-Nanoparticle InO/SnO Composite.

Sensors (Basel)

December 2024

State Key Laboratory for Manufacturing Systems Engineering, Xi'an 710049, China.

As a VOC, ethanol can be found in human exhaled breath, and its concentration can be used as a biomarker of human liver disease. To detect trace-level concentrations of ethanol, an ultrasensitive ethanol sensor was developed based on a dual-nanoparticle InO/SnO composite that was prepared by hydrothermal synthesis, and its suspension was dipped on a flat electrode to form a gas sensor. The nanocomposite was characterized by an SEM (scanning electron microscope), XRD (X-ray diffraction), and a TEM (transmission electron microscope), and the nanoparticle structure was observed.

View Article and Find Full Text PDF
Article Synopsis
  • Optoelectrowetting technology allows for the manipulation of droplets by creating virtual electrodes, avoiding complicated physical circuitry in droplet control systems.
  • Current limitations include the need for manual droplet positioning and lack of real-time feedback, which can lead to mismanagement and contamination of droplets.
  • The paper introduces an intelligent control system that integrates optoelectrowetting with deep learning for real-time detection and automatic movement control of droplets, improving flexibility and accuracy in experiments, especially in biomedicine.
View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!