AI Article Synopsis
- * The harvester features a miniaturized bistable cantilever structure and preliminary tests show a significant increase in power captured—12 times more from on-road noise and 50 times more from periodic gravity forces compared to previous methods.
- * Experiments demonstrate that varying wheel speeds enhance energy harvesting performance, confirming that the prototype can effectively generate power for real-world vehicle applications.
Article Abstract
The collection of clean power from ambient vibrations is considered a promising method for energy harvesting. For the case of wheel rotation, the present study investigates the effectiveness of a piezoelectric energy harvester, with the application of stochastic resonance to optimize the efficiency of energy harvesting. It is hypothesized that when the wheel rotates at variable speeds, the energy harvester is subjected to on-road noise as ambient excitations and a tangentially acting gravity force as a periodic modulation force, which can stimulate stochastic resonance. The energy harvester was miniaturized with a bistable cantilever structure, and the on-road noise was measured for the implementation of a vibrator in an experimental setting. A validation experiment revealed that the harvesting system was optimized to capture power that was approximately 12 times that captured under only on-road noise excitation and 50 times that captured under only the periodic gravity force. Moreover, the investigation of up-sweep excitations with increasing rotational frequency confirmed that stochastic resonance is effective in optimizing the performance of the energy harvester, with a certain bandwidth of vehicle speeds. An actual-vehicle experiment validates that the prototype harvester using stochastic resonance is capable of improving power generation performance for practical tire application.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5087514 | PMC |
| http://dx.doi.org/10.3390/s16101727 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A data-driven framework for developing a unified density-modulus relationship for the human lumbar vertebral body.
J Mech Behav Biomed Mater
January 2025
Department of Mechanical Engineering, Boston University, Boston, MA 02215, USA; Center for Multiscale and Translational Mechanobiology, Boston University, Boston, MA 02215, USA; Department of Biomedical Engineering, Boston University, Boston, MA 02215, USA.
Despite the broad agreement that bone stiffness is heavily dependent on the underlying bone density, there is no consensus on a unified relationship that applies to both cancellous and cortical compartments. Bone from the two compartments is generally assessed separately, and few mechanical test data are available for samples from the transitional regions between them. In this study, we present a data-driven framework integrating experimental testing and numerical modeling of the human lumbar vertebra through an energy balance criterion, to develop a unified density-modulus relationship across the entire vertebral body, without the necessity of differentiation between trabecular and cortical regions.
View Article and Find Full Text PDFMetabolomic Analysis and Computational Biology Reveal the Potential Metabolic Pathways for Improvement of Fucoxanthin and Eicosapentaenoic Acid (EPA) Biosynthesis in Phaeodactylum tricornutum.
Appl Biochem Biotechnol
January 2025
Plant Morphogenesis and Biochemistry Laboratory, Federal University of Santa Catarina - UFSC, Florianopolis, Santa Catarina, Brazil.
This work aims to provide a basis for the enhancement of fucoxanthin (FCX) and eicosapentaenoic acid (EPA) biosynthesis in the microalga Phaeodactylum tricornutum using metabolomics and computational biology. To achieve this, both targeted (UHPLC and GC-FID) and untargeted (FTIR and NMR) analyses were conducted throughout various stages of cell cultivation. Targeted analyses revealed that EPA concentrations peaked at the end of the logarithmic growth phase, while fucoxanthin levels remained consistent from the onset of this phase through to the stationary phase.
View Article and Find Full Text PDFIdentification and quantitative trait locus mapping of Tartary buckwheat pre-harvest sprouting.
J Sci Food Agric
January 2025
Research Center of Buckwheat Industry Technology, College of Life Science, Guizhou Normal University, Huaxi University Town, Gui'an New District, China.
Background: Tartary buckwheat (Fagopyrum tartaricum) is particularly vulnerable to pre-harvest sprouting (PHS) due to its extended flowering and fruiting cycle, especially during periods of prolonged rainfall. This susceptibility has significant adverse effects on yield, quality and post-harvest processing. In this study, a recombinant inbred lines (RILs) population (XJ-RILs) was developed from a cross between the PHS-susceptible Tartary buckwheat variety 'Xiaomiqiao' (female parent) and the highly PHS-resistant variety 'Jinqiaomai 2' (male parent).
View Article and Find Full Text PDFConstructing Interfacial B-P Bonding Bridge to Promote S-Scheme Charge Migration within Heteroatom-Doped Carbon Nitride Homojunction for Efficient HO Photosynthesis.
ACS Appl Mater Interfaces
January 2025
School of Materials Science and Engineering, Jiangsu University, Zhenjiang, Jiangsu 212013, P. R. China.
The emerging step (S)-scheme heterojunction systems became a powerful strategy in promoting photogenerated charge separation while maintaining their high redox potentials. However, the weak interfacial interaction limits the charge migration rate in S-scheme heterojunctions. Herein, we construct a unique S-scheme carbon nitride (CN) homojunction with boron (B)-doped CN and phosphorus (P)-doped CN (B-CN/P-CN) for hydrogen peroxide (HO) photosynthesis.
View Article and Find Full Text PDFMXene Hollow Microsphere-Boosted Nanocomposite Electrodes for Thermocells with Enhanced Thermal Energy Harvesting Capability.
ACS Nano
January 2025
Guangdong Provincial Key Laboratory of New Energy Materials Service Safety, College of Materials Science and Engineering, Shenzhen University, Shenzhen 518055, China.
Thermal energy, constantly being produced in natural and industrial processes, constitutes a significant portion of energy lost through various inefficiencies. Employing the thermogalvanic effect, thermocells (TECs) can directly convert thermal energy into electricity, representing a promising energy-conversion technology for efficient, low-grade heat harvesting. However, the use of high-cost platinum electrodes in TECs has severely limited their widespread adoption, highlighting the need for more cost-effective alternatives that maintain comparable thermoelectrochemical performance.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!