AI Article Synopsis

  • The text outlines the measurement principles and design of a new electromagnetic flowmeter (EMF) for downhole use.
  • It details dynamic experiments conducted on two EMFs in oil-water two-phase flow, revealing that the maximum absolute errors are below 5% for specific flow rates and conditions.
  • Finally, onsite experiments in high-water-cut oil wells are conducted, and the analysis highlights the EMF's effectiveness in measuring downhole flow.

Article Abstract

First, the measuring principle, the weight function, and the magnetic field of the novel downhole inserted electromagnetic flowmeter (EMF) are described. Second, the basic design of the EMF is described. Third, the dynamic experiments of two EMFs in oil-water two-phase flow are carried out. The experimental errors are analyzed in detail. The experimental results show that the maximum absolute value of the full-scale errors is better than 5%, the total flowrate is 5-60 m³/d, and the water-cut is higher than 60%. The maximum absolute value of the full-scale errors is better than 7%, the total flowrate is 2-60 m³/d, and the water-cut is higher than 70%. Finally, onsite experiments in high-water-cut oil-producing wells are conducted, and the possible reasons for the errors in the onsite experiments are analyzed. It is found that the EMF can provide an effective technology for measuring downhole oil-water two-phase flow.

Download full-text PDF

Source
http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5087491PMC
http://dx.doi.org/10.3390/s16101703DOI Listing

Publication Analysis

Top Keywords

oil-water two-phase
12
two-phase flow
12
novel downhole
8
electromagnetic flowmeter
8
high-water-cut oil-producing
8
oil-producing wells
8
emf described
8
maximum absolute
8
absolute full-scale
8
full-scale errors
8

Similar Publications

Synthesis of Polyacrylamide Nanomicrospheres Modified with a Reactive Carbamate Surfactant for Efficient Profile Control and Blocking.

Polymers (Basel)

October 2024

College of Chemistry and Chemical Engineering, The Youth Innovation Team of Shaanxi Universities, Shaanxi University of Science & Technology, Xi'an 710021, China.

Article Synopsis
  • - Urethane surfactants (REQ) were created using specific compounds and then used to make modified nanomicrospheres (PER) through a special polymerization process, resulting in particles with an average size of 336 nm and good thermal stability.
  • - The study measured key characteristics of these nanomicrospheres through various scientific techniques and found they maintained their properties even in challenging conditions, such as high mineralization and temperature.
  • - Importantly, these PER nanomicrospheres significantly improve oil recovery efficiency during experiments, outperforming typical AM microspheres and enhancing the final recovery rate by 23.53% due to their structural design facilitating oil emulsification.
View Article and Find Full Text PDF

This study investigates an oil/water two-phase system to assess the potential efficacy of a novel passive mixer in enhancing the liquid-liquid interfacial area within a micro-channel contactor. In this system, two fluids are introduced into a microchannel with a diameter of 800 μm and a length of 20 cm, which is equipped with a stainless-steel helical wire measuring 250 μm in diameter. Throughout the experiments, both fluids are supplied at equal flow rates, and the dominant forces, including attachment and detachment forces, are examined.

View Article and Find Full Text PDF

During the measurement of multiphase flow in low yield oil wells, the liquid volume will vary with the operating characteristics of the pumping unit. Using the pulsating characteristics of the up and down strokes of a pumping unit, the flow rate is measured when there is a flow rate on the up stroke, and the water content is measured when the fluid is stationary on the down stroke. In this paper, the heat transfer method is used to measure the water content of the oil water mixture during the down stroke process.

View Article and Find Full Text PDF
Article Synopsis
  • The study addresses the challenges of transporting heavy oil in the Lvda oilfield by examining the flow characteristics of heavy oil-water mixtures in a controlled experimental setup.
  • The researchers investigate the transition from stratified flow to annular flow (AF) using specific flow velocity ranges for both oil and water, analyzing how these conditions affect drag reduction.
  • Results show that increasing mixing velocity and water content enhances drag reduction, with an optimal ratio yielding significant pressure drop improvements when transporting heavy oil surrounded by water.
View Article and Find Full Text PDF

Passive fractionating mechanism for oil spill using shear-wettability modulation.

Nanoscale

July 2024

Thermofluidics and Nanotechnology for Sustainable Energy Systems Laboratory, School of Energy Science and Engineering, Indian Institute of Technology Kharagpur, Kharagpur, India 721302.

Oil spillage and organic solvent leakage have been a frequent occurrence in recent years, which pose a significant threat not only to the aquatic ecosystems but also result in substantial economic burdens. This has necessitated the search for materials capable of separating oil from water at enhanced efficiency with superior mechanical and thermal properties. In this study, we conduct a set of systematic molecular dynamics simulations to investigate the potential of two-dimensional graphene-like channels under extreme confinement to achieve efficient oil-water separation.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!