Epidermal electronic systems (EESs) are skin-like electronic systems, which can be used to measure several physiological parameters from the skin. This paper presents materials and a simple, straightforward fabrication process for skin-conformable inkjet-printed temperature sensors. Epidermal temperature sensors are already presented in some studies, but they are mainly fabricated using traditional photolithography processes. These traditional fabrication routes have several processing steps and they create a substantial amount of material waste. Hence utilizing printing processes, the EES may become attractive for disposable systems by decreasing the manufacturing costs and reducing the wasted materials. In this study, the sensors are fabricated with inkjet-printed graphene/PEDOT:PSS ink and the printing is done on top of a skin-conformable polyurethane plaster (adhesive bandage). Sensor characterization was conducted both in inert and ambient atmosphere and the graphene/PEDOT:PSS temperature sensors (thermistors) were able reach higher than 0.06% per degree Celsius sensitivity in an optimal environment exhibiting negative temperature dependence.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC5082757 | PMC |
| http://dx.doi.org/10.1038/srep35289 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Design and manufacture of CubeSat-type nanosatellite thermal subsystem.
Sci Rep
January 2025
Instituto Politécnico Nacional, Centro de Desarrollo Aeroespacial, 06610, Mexico City, Mexico.
This work presents the design and validation of a thermal subsystem for a 1U CubeSat-type nanosatellite. The design encompasses two stages: regulating the satellite's temperature range through implementing passive control based on multilayer coatings and an electronic board capable of measuring the internal surface temperature of each of the satellite's six faces. Validation is conducted through tests performed in a theoretical thermo vacuum chamber that provides a controlled environment, simulating the thermal conditions to which the satellite will be exposed once in orbit.
View Article and Find Full Text PDFDetection of biogenic amines using a ylidenemalononitrile enamine-based fluorescence probe: Applications in food quality control.
Spectrochim Acta A Mol Biomol Spectrosc
January 2025
Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, School of Chemistry and Materials Science, Nanjing Normal University, Nanjing 210046 China. Electronic address:
Biogenic amines (BAs) are a class of nitrogen-containing natural organic compounds. Elevated levels of BAs are a reliable indicator of food spoilage and pose a significant risk to human health. Thus, the development of real-time sensors for BAs monitoring is crucial.
View Article and Find Full Text PDFSelective Undercut of Undoped Optical Membranes for Spin-Active Color Centers in 4H- Silicon Carbide.
ACS Nano
January 2025
John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, United States.
Silicon carbide (SiC) is a semiconductor used in quantum information processing, microelectromechanical systems, photonics, power electronics, and harsh environment sensors. However, its high-temperature stability, high breakdown voltage, wide bandgap, and high mechanical strength are accompanied by a chemical inertness, which makes complex micromachining difficult. Photoelectrochemical (PEC) etching is a simple, rapid means of wet processing SiC, including the use of dopant-selective etch stops that take advantage of the mature SiC homoepitaxy.
View Article and Find Full Text PDFNanoscale Effects in the Room-Temperature UV-Visible Photoluminescence from Silica Particles and Its Cancer Cell Imaging.
Bioconjug Chem
January 2025
Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667, Uttarakhand, India.
Silica nano/microparticles have generated significant interest for the past decades, emerging as a versatile material with a wide range of applications in photonic crystals, bioimaging, chemical sensors, and catalysis. This study focused on synthesizing silica nano/microparticles ranging from 20 nm to 1.2 μm using the Stöber and modified Stöber methods.
View Article and Find Full Text PDFA biomass-derived multifunctional conductive coating with outstanding electromagnetic shielding and photothermal conversion properties for integrated wearable intelligent textiles and skin bioelectronics.
Mater Horiz
January 2025
Institute of Biomass and Function Materials & National Demonstration Centre for Experimental Light Chemistry Engineering Education, College of Bioresources Chemistry and Materials Engineering, Shaanxi University of Science and Technology, Xi'an, 710021, P. R. China.
Intelligent electronic textiles have important application value in the field of wearable electronics due to their unique structure, flexibility, and breathability. However, the currently reported electronic textiles are still challenged by issues such as their biocompatibility, photothermal conversion, and electromagnetic wave contamination. Herein, a multifunctional biomass-based conductive coating was developed using natural carboxymethyl starch (CMS), dopamine and polypyrrole (PPy) and then further employed for constructing multifunctional intelligent electronic textiles.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!