Objectives: The aim of this study was to evaluate and compare the translucency of two different all-ceramic systems using Vita Easyshade digital shade matching device in an in vitro model.
Materials And Methods: Translucency of lithium disilicate glass-ceramic (IPS e.max Press) and zirconia all-ceramic system (Ceramill ZI) were evaluated and compared. A total of 5 square-shaped specimens with 0.5 mm thickness were fabricated from each ceramic system in A1 shade according to Vitapan Classical shade tab. Specimens were then veneered and glazed with corresponding veneer ceramics recommended by each system manufacturer and the total thickness was set to 1.5 mm. Translucency was evaluated using VITA Easyshade in two stages: before and after veneering and glazing on black and white background. Translucency parameter (TP) was calculated. A one-way ANOVA and Bonferonni tests were used when appropriate (α=0.05).
Results: Lithium disilicate glass-ceramic was significantly more translucent than the zirconia system in both stages (P<0.05). Translucency of all specimens was significantly decreased after veneering and glazing in both all-ceramic systems (P<0.05).
Conclusion: The translucency of two different dental ceramics was significantly influenced by both material and stages of preparation. Within the limitations of the experiment, these results can be valuable and help the clinician to make appropriate esthetic decisions.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4993593 | PMC |
| http://dx.doi.org/10.15644/asc49/3/1 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Fracture Resistance and Wear Behavior of Ultra-Thin Occlusal Veneers Made From Translucent Zirconia Ceramics Bonded to Different Tooth Substrates.
J Esthet Restor Dent
January 2025
Department of Prosthodontics, Propaedeutics and Dental Materials, School of Dentistry, Christian-Albrechts University at Kiel, Kiel, Germany.
Objective: Investigation of the mechanical properties of occlusal veneers made from zirconia with varying translucency, bonded to different tooth substrates.
Materials And Methods: Sixty-four extracted molars were divided into two groups: preparation within enamel (E) or extending into dentin (D). Veneers were milled from four zirconia ceramics (n = 8): 5Y-TZP (HT), a multilayer of 5 and 3Y-TZP (GT), 3Y-TZP (LT), and 4Y-TZP (MT).
Effect of aging on the translucency of lithium disilicate and zirconia reinforced lithium silicate ceramics: An study.
Heliyon
December 2024
Prosthodontic Department, College of Medicine and Dentistry, Riyadh Elm University, Riyadh, Saudi Arabia.
Background: Translucency of dental ceramics have great impact on the esthetic and success of dental restorations. The goal of the study is to investigate the effect of the aging process on the translucency of zirconia-reinforced lithium silicate ceramic material, and lithium disilicate ceramic material made using CAD/CAM and press processes.
Methods: Thirty disc-shaped specimens with 0.
Three-unit posterior monolithic fixed dental prostheses made from high-translucent shade-graded zirconia: 3-Year results from a prospective clinical pilot study.
Clin Oral Investig
December 2024
Department of Prosthetic Dentistry, University Hospital, LMU Munich, Goethestraße 70, D-80336, Munich, Germany.
Objectives: To assess the clinical performance of tooth-supported 3-unit fixed dental prostheses (FDPs) made from shade-graded monolithic 5Y-PSZ (partly stabilized zirconia) zirconia in terms of survival rate and the quality of restorations based on modified FDI criteria over three-years.
Materials And Methods: High-translucent shade-graded monolithic zirconia (Lava Esthetic, Solventum Dental Solutions) was used to manufacture maxillary or mandibular three-unit FDPs in the posterior region (N = 22) employing subtractive milling system (Amann Girrbach). All FDPs were bonded with a universal resin cement (Rely X Universal, Solventum Dental Solutions) and evaluated 4 weeks after cementation (baseline) and after 1, 2, and 3 years.
Aging and Fracture Tests on Differently Veneered Partially Stabilized Zirconia Anterior Crowns.
Int J Dent
October 2024
Department of Prosthodontics, University Clinic Heidelberg, University of Heidelberg, Heidelberg, Germany.
To evaluate the fracture resistance of veneered incisor crowns made from highly translucent zirconia frameworks. Ninety-six all-ceramic single crowns were based on either a coping with minimum wall thickness or a cutback framework fabricated from highly translucent zirconia (5Y-PSZ). Each one-third of the specimens was finalized with different veneering ceramics using standardizations and glaze firing.
View Article and Find Full Text PDFInternal fit and marginal adaptation of all-ceramic implant-supported hybrid abutment crowns with custom-milled screw-channels on Titanium-base: in-vitro study.
BMC Oral Health
September 2024
Fixed Prosthodontics Department, Faculty of Dentistry, Cairo University, 11 EL-Saraya St. Manial, Cairo, 11553, Egypt.
Background: Advancements in digital dentistry helped in custom-milling screw-channels in implant-supported restorations; however, the fit of these restorations is still unclear especially for contemporary computer aided designing/computer aided manufacturing (CAD/CAM) materials. This study aimed to compare the internal and marginal fit of Ultra translucent multilayered zirconia versus lithium disilicate implant-supported hybrid abutment crowns (HACs) constructed with custom-milled screw-channels on Titanium-base.
Materials And Methods: A total of 24 HACs with custom-milled screw-channels were constructed from lithium disilicate (Group LDS) and Ultra translucent multilayered zirconia (Group UT) using digital workflow (n = 12).
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!