Effect of pulse repetition frequency of high-intensity focused ultrasound on in vitro thrombolysis.

Ultrason Sonochem

School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, Singapore. Electronic address:

Published: March 2017

Vascular occlusion by the thrombi is the main reason for ischemic stroke and deep vein thrombosis. High-intensity focused ultrasound (HIFU) and histotripsy or microtripsy pulses can effectively dissolve the blood clot with no use of thrombolytic agent and ultrasound contrast agent (microbubbles). In this study, HIFU bursts at the same duty cycle (2%) but varied pulse repetition frequency (PRF) from 1Hz to 1000Hz were delivered to in vitro porcine blood clot for 30s. Thrombolysis efficiency initially increases slightly with the PRF, 86.4±10.3%, 89.9±11.9, and 92.9±12.8% at the PRF of 1Hz, 10Hz, and 100Hz, respectively, without significant difference (p>0.05), but then drops dramatically to 37.9±6.9% at the PRF of 1000Hz (p<0.05). The particle size in the supernatant of dissolution is 547.1±129.5nm, which suggests the disruption of thrombi into the subcellular level. Thrombi motion during HIFU exposure shows violent motion and significant curling at the low PRF, rotation about its axis with occasional curling at the moderate PRF, and localized vibration at the high PRF due to the generation of acoustic radiation force and streaming. Quantitative analysis of recorded motion shows the axial displacement decreases with the PRF of delivered HIFU bursts, from 3.9±1.5mm at 1Hz to 0.7±0.4mm at 1000Hz. Bubble cavitation during HIFU exposure to the blood clot was also monitored. The increase of PRF led to the increase of inertial cavitation but the decrease of stable cavitation. In summary, the PRF of delivered HIFU bursts at the same output energy has a significant effect on the thrombi motion, bubble cavitation activities, and subsequently thrombolysis efficiencies.

Download full-text PDF

Source
http://dx.doi.org/10.1016/j.ultsonch.2016.09.014DOI Listing

Publication Analysis

Top Keywords

pulse repetition
8
repetition frequency
8
high-intensity focused
8
focused ultrasound
8
blood clot
8
prf 1hz
8
frequency high-intensity
4
ultrasound vitro
4
vitro thrombolysis
4
thrombolysis vascular
4

Similar Publications

Influence of Different Spot Pattern Lasers on Cleaning Effect of TC4 Titanium Alloy.

Materials (Basel)

December 2024

Key Laboratory High Efficiency & Clean Mech Manufacture, School of Mechanical Engineering, Shandong University, Ministry of Education, 17923 Jingshi Rd., Jinan 250061, China.

This study employed different spot pattern lasers to clean the oxide film on the surface of a TC4 titanium alloy. The variation in temperature field and ablation depth during the laser cleaning process was simulated by establishing a finite element model. The effects of various laser processing parameters on the micromorphology, elemental composition, and surface roughness of the TC4 titanium alloy were analyzed.

View Article and Find Full Text PDF

Anion photoelectron velocity-map imaging using a tunable laser at a 100 kHz repetition rate.

J Chem Phys

January 2025

Department of Chemistry, Faculty of Science, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan.

We present velocity-map imaging (VMI) of photoelectrons detached from anions using an optical parametric amplifier operating at a repetition rate as high as 100 kHz. The light source generates femtosecond (fs) laser pulses tunable from near-infrared to ultraviolet (310-2600 nm), which interact synchronously with mass-selected anion bunches. We demonstrate this technique by measuring two-dimensional projections of photoelectrons ejected from silver trimer anions, Ag3-, across a photon energy range from 2.

View Article and Find Full Text PDF

Serial macromolecular crystallography has become a powerful method to reveal room temperature structures of biological macromolecules and perform time-resolved studies. ID29, a flagship beamline of the ESRF 4th generation synchrotron, is the first synchrotron beamline in the world capable of delivering high brilliance microsecond X-ray pulses at high repetition rate for the structure determination of biological macromolecules at room temperature. The cardinal combination of microsecond exposure times, innovative beam characteristics and adaptable sample environment provides high quality complete data, even from an exceptionally small amount of crystalline material, enabling what we collectively term serial microsecond crystallography (SµX).

View Article and Find Full Text PDF

(1) Background: Ultra-high dose rate (UHDR) radiation therapy needs a reliable dosimetry solution and scintillation detectors are promising candidates. In this study, we characterized an inorganic powder-based scintillation detector under a 9 MeV UHDR electron beam. (2) Methods: A mixture of ZnS:Ag powder and optic glue was coupled to an 8 m Eska GH-4001-P polymethyl methacrylate (PMMA) optical fiber.

View Article and Find Full Text PDF

Recent advances in Light Emitting Diode (LED) technology have enabled a more affordable high frame rate photoacoustic imaging (PA) alternative to traditional laser-based PA systems that are costly and have slow pulse repetition rate. However, a major disadvantage with LEDs is the low energy outputs that do not produce high signal-to-noise ratio (SNR) PA images. There have been recent advancements in integrating deep learning methodologies aimed to address the challenge of improving SNR in LED-PA images, yet comprehensive evaluations across varied datasets and architectures are lacking.

View Article and Find Full Text PDF

Want AI Summaries of new PubMed Abstracts delivered to your In-box?

Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!