The objective of this study was to understand the adsorption ability of a surfactant and a non-surfactant chemical additive used in hydraulic fracturing onto shale and GAC. Experiments were performed at varying temperatures and sodium chloride concentrations to establish these impacts on the adsorption of the furfural (a non-surfactant) and 2-Butoxyethanol (2-BE) (a surfactant). Experiments were carried out in continuously mixed batch experiments with Langmuir and Freundlich isotherm modeling. The results of the experiments showed that adsorption of these compounds onto shale does not occur, which may allow these compounds to return to the surface in flowback and produced waters. The adsorption potential for these chemicals onto GAC follows the assumptions of the Langmuir model more strongly than those of the Freundlich model. The results show uptake of furfural and 2-BE occurs within 23 h in the presence of DI water, 0.1 mol L sodium chloride, and in lab synthesized hydraulic fracturing brine. Based on the data, 83% of the furfural and 62% of the 2-BE was adsorbed using GAC.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.chemosphere.2016.09.010 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Experimental investigation into the Impact of Cyclic High Low Pressure Water Immersion on the Pore structure and Mechanical properties of coal.
Sci Rep
January 2025
School of Safety and Management Engineering, Hunan Institute of Technology, Hengyang, 421002, China.
The extraction of coal seams with high gas content and low permeability presents significant challenges, particularly due to the extended period required for gas extraction to meet safety standards and the inherently low extraction efficiency. Hydraulic fracturing technology, widely employed in the permeability enhancement of soft and low-permeability coal seams, serves as a key intervention. This study focuses on the high-rank raw coal from the No.
View Article and Find Full Text PDFStudy on pH-Responsive Delayed, Cross-Linking and Weighted Fracturing Fluid.
Molecules
December 2024
National Key Laboratory of Petroleum Resources and Engineering, China University of Petroleum, Beijing 102249, China.
Hydraulic fracturing of deep, high-temperature reservoirs poses challenges due to elevated temperatures and high fracture pressures. Conventional polymer fracturing fluid (QCL) has high viscosity upon adding cross-linking agents and significantly increases wellbore friction. This paper examines a polymer fracturing fluid with pH response and low friction.
View Article and Find Full Text PDFSeepage mode in lamina-developed shale oil reservoirs under strong heterogeneous and strong fluid-solid coupling in Jiyang depression of China.
Sci Rep
January 2025
College of Petroleum Engineering, Liaoning Petrochemical University, Fushun, China.
The laminae of varying lithologies are characteristic of shale oil reservoirs, with their pronounced heterogeneity and fluid-solid coupling significantly impacting oil productivity. To this end, this study initially quantified the permeability and mechanical heterogeneity in lamina-developed shale through permeability tests and quasi triaxial mechanical experiments on shale cores from different orientations in the Jiyang Depression. These tests revealed marked brittleness in horizontally oriented cores and elasticity in vertically oriented cores.
View Article and Find Full Text PDFPore pressure inhibits clustering of induced earthquakes in Western Canada.
Proc Natl Acad Sci U S A
January 2025
Department of Civil and Environmental Engineering, Western University, London, ON N6A 5B9, Canada.
Induced earthquakes are manifestations of highly heterogeneous distributions of effective stress changes imparted by anthropogenic activities such as hydraulic fracturing and wastewater injection. It is critical to disentangle the mechanisms behind these earthquakes to better assess seismic risk. Here, a clustering methodology is applied to a catalog of 21,536 induced earthquakes detected during a 36-d hydraulic stimulation program in Western Canada.
View Article and Find Full Text PDFReview of the environmental and health risks of hydraulic fracturing fluids.
Heliyon
January 2025
Department of Civil and Environmental Engineering, Maroun Semaan Faculty of Engineering and Architecture, American University of Beirut, Lebanon.
The composition of hydraulic fracturing (HF) fluid poses risks to human health and the environment by impacting drinking water sources. Fracturing fluid recovery rate is highly variable, and the fact that a high percentage of the injected HF fluid is not produced back to the surface in some areas raises questions about its fate and possible migration into aquifers. In this paper, the composition of the HF fluid and related toxicity are described, along with insights about the environmental impact linked with HF fluid, synthesized spill data, main factors affecting the flow-back ratio, and induced seismicity related to HF activities.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!