Flocculation holds great potential as a low-cost harvesting method for microalgae biomass production. Three flocculation methods (ferric chloride, chitosan, and alkaline flocculation) were compared in this study for the harvesting of 9 different freshwater and marine microalgae and one cyanobacterium species. Ferric chloride resulted in a separation efficiency greater than 90% with a concentration factor (CF) higher than 10 for all species. Chitosan flocculation worked generally very well for freshwater microalgae, but not for marine species. Alkaline flocculation was most efficient for harvesting of Nannochloropsis, Chlamydomonas and Chlorella sp. The concentration factor was highly variable between microalgae species. Generally, minimum flocculant dosages were highly variable across species, which shows that flocculation may be a good harvesting method for some species but not for others. This study shows that microalgae and cyanobacteria species should not be selected solely based on their productivity but also on their potential for low-cost separation.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1016/j.biortech.2016.08.080 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Optimized pure cellulose from rice straw using low alkali concentration for sustainable nanocellulose and nanohydrogel production with enhanced dye reduction.
Int J Biol Macromol
January 2025
Department of Food Technology and Nutrition, Lovely Professional University, Phagwara 144411, Punjab, India. Electronic address:
Conversion of rice straw into nanocellulose offers a sustainable approach to agricultural waste management, yielding an industrially important product with potential applications. This work focuses on effectively extracting pure cellulose from both widely used Basmati and Parmal rice straw (BRS and PRS) using less alkali concentrations (3-5 % NaOH). The process was optimized via Box Behnken design at 90-150 °C temperatures for 90-150 min, which resulted in 88.
View Article and Find Full Text PDFDetermination of main influence mechanism of fulvic acid on arsenic removal by ferric chloride.
J Environ Sci (China)
July 2025
John A. Reif, Jr. Department of Civil and Environmental Engineering, New Jersey Institute of Technology, Newark, New Jersey 07102, USA.
In this study, synthetic wastewater containing 110 µg/L arsenate (As(V)), 0-20 mg/L fulvic acid (FA), and 0-12.3 mg/L phosphate was treated with 3 mg/L Fe. The mechanisms of FA and phosphate effects on As(V) removal by ferric chloride were determined using 0.
View Article and Find Full Text PDFThe role of pre-coagulation in wastewater nitrogen removal: Greenhouse gas emission reduction.
J Environ Manage
January 2025
School of Environmental Science and Resources, Shanxi Laboratory for Yellow River, Shanxi University, Taiyuan, 030006, China. Electronic address:
In order to achieve the carbon peak and carbon neutrality goals, more and more industries were carrying out carbon emission reduction. Of course, carbon emission reduction in the wastewater treatment was also crucial. This study developed a pre-coagulation process to prevent some pollutants (28-33% of total nitrogen and other pollutants such as organic matter) from entering the biochemical treatment stage, thereby reducing carbon emissions in the wastewater treatment.
View Article and Find Full Text PDFThe fate and mobility of chromium, arsenic and zinc in municipal sewage sludge during the co-pyrolysis process with organic and inorganic chlorides.
Sci Rep
January 2025
Institute of Science and High Technology and Environmental Sciences, Graduate University of Advanced Technology, Kerman, Iran.
Co-pyrolysis is an efficient approach for municipal sewage sludge (SS) treatment, facilitating the production of biochar and promoting the stabilization and removal of heavy metals, particularly when combined with chlorinated materials. This study explores the impact of pyrolysis temperatures (400 °C and 600 °C) and chlorinated additives (polyvinyl chloride (PVC) as an organic chloride source and ferric chloride (FeCl) as an inorganic chloride source) at 10% and 20% concentrations, on the yield, chemical speciation, leachability, and ecological risks of arsenic (As), chromium (Cr), and zinc (Zn) in biochar derived from SS. The results revealed that increasing the pyrolysis temperature from 400 to 600 °C significantly reduced biochar yield due to enhanced volatilization of organic components, as well as the removal of heavy metals in interaction with chlorinated materials.
View Article and Find Full Text PDFSimultaneous removal of nitrate, carbamazepine, and copper by fulvic acid and ferric chloride composite modified ceramsite assembled fixed biofilter reactor: Performance and microbial community response.
J Environ Manage
January 2025
School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, China; Shaanxi Key Laboratory of Environmental Engineering, Xi'an University of Architecture and Technology, Xi'an, 710055, China.
The complex pollution and nutrient-poor characteristics of surface waters result in the limited ability of conventional reactors to remove pollutants. In this study, a novel modified ceramsite material, modified with trivalent iron (Fe(III)) and fulvic acid (FA) to form ceramsite@Fe(III)@FA (HC), was used for the first time as a biocarrier to immobilize strain Cupriavidus sp. W12, constructing a biofilter to enhance nitrate (NO-N) removal in micro-polluted water.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!