A carbon fiber ionization (CFI) technique was developed for the mass spectrometric analysis of various organic compounds with different polarities. The design of the CFI technique was based on the good compatibility and dispersion of samples and solutions in different solvents on carbon fiber. As a fast, convenient, and versatile ionization method, CFI-MS is especially efficient for analyzing many low/nonpolar organic compounds, such as polycyclic aromatic hydrocarbons, long-chain aliphatic aldehydes, sensitive steroids, terpenoids, and organometallic compounds. Some of these compounds may not be well-analyzed by electrospray ionization or electron ionization mass spectrometry. On the basis of our experimental results, the major ion formation mechanism of CFI-MS was suggested to involve desorption in a steam-distillation-like process, and then, ionization occurred mainly via corona discharge under high voltage. CFI-MS could not only work alone but also be coupled with separation techniques. It works well when coupled with supercritical fluid chromatography (SFC) as well as in the analysis of exhaled human air. The high flexibility and versatility of CFI-MS has extended its applications in many areas, such as fast chemical screening, clinical testing, and forensic analysis.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1021/acs.analchem.6b02166 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Feasibility exploration of nano-thermal rod applied to deicing of tunnel pavement in cold region.
Sci Rep
January 2025
Nanjing ShengNuo Heat Pipe Limited Company, Nanjing, 210009, China.
This study investigates the feasibility of using nano-thermal rod for deicing tunnel pavements in cold region. The heating performance of the nano-thermal rod was compared with that of carbon fiber heating wire under low voltage conditions. Experimental studies were conducted in a controlled environmental chamber to evaluate the effects of arrangement parameters (spacing, buried depth, input power) and environmental factors (ambient temperature and moisture) on heating rate and effectiveness.
View Article and Find Full Text PDFFinite element investigation for improving chest wall reconstruction process using ceramic and polymeric implants.
Sci Rep
January 2025
Biomedical Engineering Department, Faculty of Engineering, Helwan University, Cairo, Egypt.
Car accidents, infections caused by bacteria or viruses, metastatic lesions, tumors, and malignancies are the most frequent causes of chest wall damage, leading to the removal of the affected area. After excision, artificial bone or synthetic materials are used in chest wall reconstruction to restore the skeletal structure of the chest. Chest implants have traditionally been made from metallic materials like titanium alloys due to their biocompatibility and durability.
View Article and Find Full Text PDFFlexible disk ultramicroelectrode: Facile preparation and high-resolution scanning electrochemical microscopy imaging.
Anal Chim Acta
January 2025
State Key Laboratory of Electroanalytical Chemistry, Jilin Province Key Laboratory of Low Carbon Chemical Power, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun, 130022, Jilin, China; School of Applied Chemistry and Engineering, University of Science and Technology of China, Hefei, 230026, Anhui, China. Electronic address:
Background: Scanning electrochemical microscopy (SECM) is a kind of scanning probe technology that enables the obtainment of surface morphology and electrochemical information by recording changes in Faraday current triggered by the movement of probe.
Results: In this work, flexible disk ultramicroelectrode (UME) with highly repeatable geometry are fabricated through a simple and universal strategy that involves vacuum pulling the glass capillaries inserted with platinum wire (gold wire, carbon fiber, etc.), followed by a rapidly heated sealing and polishing process.
Preparation of bio-based flame retardants by modification of cottonseed meal with polyphosphate and boric acid and its durability to cotton fiber.
Int J Biol Macromol
January 2025
College of Chemistry Engineering and Materials Science, Tianjin University of Science and Technology, Tianjin 300457, China.
The durability and flame retardancy of cotton fabrics have been the focus of long-term research. In this paper, a method for preparing flame retardants through the direct modification of biomass was proposed, and the durable flame retardant of homologous cottonseed meal modified biomass flame retardants for cotton fabrics was achieved through biomass composition analysis and modeling. In this study, a cottonseed meal-phosphoric acid-boric acid synergistic bio-based flame retardant (CPB) was synthesized and characterized.
View Article and Find Full Text PDFThe effect of carbon fiber custom dynamic orthosis type on kinematics and kinetics of lower extremity joints in individuals with lower limb traumatic injuries.
Gait Posture
December 2024
Department of Physical Therapy and Rehabilitation Science, Carver College of Medicine, University of Iowa, Iowa City, IA, USA.
Background: Carbon fiber custom dynamic orthoses have been used to improve gait mechanics after lower limb trauma in military service members, with the goal of restoring function and improving outcomes. However, the effects of commercially available carbon fiber orthoses available to civilians on lower extremity joint kinetics and kinematics are poorly understood.
Research Question: The aim of this study was to examine the effect of two commercially available orthoses on lower extremity kinematics and kinetics in individuals with lower limb trauma.
Want AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!