Thin-film elastomers (elastic polymers) have a number of technologically significant applications ranging from sportswear to medical devices. In this work, we demonstrate that graphene can be used to reinforce 20 micron thin elastomer films, resulting in over 50% increase in elastic modulus at a very low loading of 0.1 wt%, while also increasing the elongation to failure. This loading is below the percolation threshold for electrical conductivity. We demonstrate composites with both graphene oxide and reduced graphene oxide, the reduction being undertaken in-situ or ex-situ using a biocompatible reducing agent in ascorbic acid. The ultrathin films were cast by dip moulding. The transparency of the elastomer films allows us to use optical microscopy image and confirm the uniform distribution as well as the conformation of the graphene flakes within the composite.
Download full-text PDF |
Source |
|---|---|
| http://www.ncbi.nlm.nih.gov/pmc/articles/PMC4913555 | PMC |
| http://dx.doi.org/10.1016/j.carbon.2016.05.032 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
A multi-responsive 3D deformable soft actuator with tunable structural color enabled by a graphene/cholesteric liquid crystal elastomer composite.
Mater Horiz
January 2025
School of Materials Science and Engineering, Peking University, Beijing 1008711, P. R. China.
Intelligent soft robots that integrate both structural color and controllable actuation ability have attracted substantial attention for constructing biomimetic systems, biomedical devices, and soft robotics. However, simultaneously endowing single-layer cholesteric liquid crystal elastomer (CLCE) soft actuators with reversible 3D deformability and vivid structural color changes is still challenging. Herein, a multi-responsive (force, heat and light) single-layer 3D deformable soft actuator with vivid structural color-changing ability is realized through the reduced graphene oxide (RGO) deposition-induced Janus structure of the CLCE using a precisely-controlled evaporation method.
View Article and Find Full Text PDFFully Transparent and Distortion-Free Monotonically Stretchable Substrate by Nanostructure Alignment.
Adv Mater
December 2024
Soft Hybrid Materials Research Center, Korea Institute of Science and Technology, Seoul, 02792, Republic of Korea.
Stretchable devices, garnering increasing attention as next-generation form factors, have a crucial problem in that vertical contraction occurs during stretching, causing image distortion of stretchable displays and discomfort in skin-attached devices. Previous structural strategies to mitigate vertical contraction, such as auxetic reentrants and wrinkles, suffer from the drawback that their structure becomes visible during stretching. In this study, this issue is addressed by unidirectionally aligning nanoscopic cylinders within block copolymer elastomer films.
View Article and Find Full Text PDFSynergistic Multimodal Energy Dissipation Enhances Certified Efficiency of Flexible Organic Photovoltaics beyond 19.
Adv Mater
December 2024
College of Chemistry and Chemical Engineering/ Film Energy Chemistry for Jiangxi Provincial Key Laboratory (FEC), Nanchang University, 999 Xuefu Avenue, Nanchang, 330031, China.
All-polymer organic solar cells (OSCs) have shown unparalleled application potential in the field of flexible wearable electronics in recent years due to the excellent mechanical and photovoltaic properties. However, the small molecule acceptors after polymerization in still retain some mechanical and aggregation properties of the small molecule, falling short of the ductility requirements for flexible devices. Here, based on the multimodal energy dissipation theory, the mechanical and photovoltaic properties of flexible devices are co-enhanced by adding the thermoplastic elastomer material (polyurethane, PU) to the PM6:PBQx-TF:PY-IT-based active layer films.
View Article and Find Full Text PDFChitosan/vanillin/polydimethylsiloxane scaffolds with tunable stiffness for muscle cell proliferation.
Int J Biol Macromol
December 2024
Fundamental Chemistry Department, Institute of Chemistry, University of São Paulo, Av. Prof. Lineu Prestes 748, 05508-000 São Paulo, Brazil. Electronic address:
The mechanical properties of scaffolds can significantly influence cell behavior. We propose a methodology for producing chitosan and vanillin-crosslinked chitosan films with tunable mechanical properties to be applied as scaffolds for C2C12 myoblasts. In this approach, aqueous polydimethylsiloxane (PDMS) elastomeric dispersions were prepared using polysorbate 20 as emulsifier.
View Article and Find Full Text PDFVisible-light-programmed patterning in dynamically bonded cholesteric liquid crystal elastomer.
Nat Commun
November 2024
School of Materials Science and Engineering, College of Engineering, Peking University, Beijing, PR China.
Optical properties of cholesteric liquid crystal elastomers (CLCEs) can be tuned by an external field, however, it will spontaneously restore to the original state after the field is removed. Here, we introduce diselenide dynamic covalent bonds (DCBs) into CLCEs, whose optical properties can be reversibly and precisely tuned under the combined action of force and light. The tuned optical properties will be written into and remembered by the CLCEs, thus a programming effect is achieved.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!