Electrospraying nano- and micro-particle fabrication is a one-step, non-invasive process, which has application in encapsulating of thermosensitive functional, bioactive materials and cells and making microhydrogels. This study investigates the effect of various electrospraying process parameters on the characteristics of calcium alginate microhydrogel particles. The alginate solution concentration, CaCl coagulation bath concentration, voltage, nozzle diameter, distance between nozzle and collecting bath (D), alginate delivery pressure (∼H) were examined. The best droplet formation rate, in non-disperse dripping mode, was obtained at 8 kV using a 500 μm inner diameter nozzle tip, D = 8 cm, H = 20 cm. Morphology, swelling behaviour and texture analysis of the particles which were followed by scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) confirmed that 1.5-2% (w/v) CaCl was the desirable concentration for hydrogels formation. Particle size range between 267 and 1500 μm could be obtained by the drip feed mode compared with 2.3-6 μm by the pressure-assisted electrospray through a coaxial head.
Download full-text PDF |
Source |
|---|---|
| http://dx.doi.org/10.1080/02652048.2016.1228707 | DOI Listing |
Publication Analysis
Top Keywords
Similar Publications
Chitosan/Alginate-Based Hydrogel Loaded With VE-Cadherin/FGF as Scaffolds for Wound Repair in Different Degrees of Skin Burns.
J Biomed Mater Res B Appl Biomater
January 2025
Key Laboratory of Advanced Technology for Materials of Chinese Education Ministry, School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu, China.
Burns are complex traumatic injuries that lead to severe physical and psychological problems due to the prolonged healing period and resulting physical scars. Owing to their versatility, hydrogels can be loaded with various functional factors, making them promising wound dressings. However, many hydrogel dressings cannot support cell survival for a long time, thereby delaying the process of tissue repair.
View Article and Find Full Text PDFTrial of alginates in throat symptoms: protocol for a pragmatic, multicentre, placebo controlled, double blind, parallel, randomised controlled trial of liquid alginate (Gaviscon Advance) for the treatment of persistent throat symptoms.
BMJ Open
January 2025
Population Health Sciences Institute, Newcastle University, Newcastle upon Tyne, Tyne and Wear, UK
Introduction: Persistent throat symptoms (PTS) are indicators for over 60 000 new patient referrals to NHS secondary care annually. PTS have been attributed to manifestation of gastro-oesophageal reflux disease (GORD) with the hypothesis that gastric refluxate damages and irritates the mucosa of the upper aerodigestive tract. Symptoms of PTS and GORD are commonly treated with proton pump inhibitors (PPIs) or alginates are often, incorrectly, advocated.
View Article and Find Full Text PDFCalcium alginate reinforced zwitterionic double network hydrogel with mechanical robustness and antimicrobial activity for freshwater shrimp spoilage detection.
Food Res Int
January 2025
Key Laboratory of Product Packaging and Logistics, Packaging Engineering Institute, College of Packaging Engineering, Jinan University, Qianshan Road 206, Zhuhai 519070, Guangdong Province, China. Electronic address:
Hydrogel indicators promise to monitor food spoilage, but their poor mechanics can cause defects in transport. Herein, a novel zwitterionic double network (DN) hydrogel was developed by polymerizing arylamide and sulfobetaine methacrylate in an alginate-Ca system. This hydrogel exhibited enhanced mechanical properties, including a maximum 2087 % breaking elongation and 135 ± 12 kJ/m toughness, significantly outperforming the current zwitterionic DN hydrogels, which typically exhibit less than 1800 % breaking elongation, capable of supporting 150 g-136 times its own weight.
View Article and Find Full Text PDFBench scale Layer-by-Layer microencapasulation of Lactiplantibacillus plantarum WCFS1.
Food Res Int
January 2025
Center for Research and Development in Food Cryotechnology (CIDCA, CCT-CONICET), La Plata 1900, Argentina. Electronic address:
Layer-by-Layer (LbL) self-assembly encapsulation is a promising technology for the protection and delivery of lactic acid bacteria. However, laboratory-scale encapsulation is often time-consuming, involves intensive protocols tailored for small-scale operations, requires substantial amounts of energy and water, and results in a low yield of encapsulated biomass. Scaling-up this process to a bench-bioreactor scale is not simply a matter of increasing culture volume as different key parameters (not particularly relevant at lab scale) become critical, including biomass production, the number of polymer layers, and the biomass-to-polymer mass ratio.
View Article and Find Full Text PDFSprayable, antimicrobial and immunoregulation hydrogel loading exosomes based on oxidized sodium alginate for efficient wound healing at skin graft donor sites and health detection.
Carbohydr Polym
March 2025
School of Materials Science and Engineering, Tongji University, Shanghai 201804, PR China. Electronic address:
Skin grafting techniques are widely used for large burns, trauma, and various acute and chronic wounds, contributing greatly to the repair of traumatic tissue. However, donor site repair and regeneration are often neglected, resulting in infection and delayed healing. Therefore, it is crucial to reduce the rate of donor site infection and improve the speed and quality of healing.
View Article and Find Full Text PDFWant AI Summaries of new PubMed Abstracts delivered to your In-box?
Enter search terms and have AI summaries delivered each week - change queries or unsubscribe any time!